Correct spelling typos in printk and comments Signed-off-by: Masanari Iida <standby2...@gmail.com> --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 4 ++-- drivers/media/pci/saa7164/saa7164-core.c | 2 +- drivers/rtc/Kconfig | 4 ++-- drivers/rtc/rtc-max8997.c | 2 +- drivers/usb/misc/iowarrior.c | 4 ++-- drivers/usb/misc/uss720.c | 2 +- drivers/video/amifb.c | 2 +- drivers/video/auo_k190x.c | 2 +- drivers/video/goldfishfb.c | 2 +- drivers/video/s1d13xxxfb.c | 2 +- drivers/video/ssd1307fb.c | 4 ++-- fs/nfs/objlayout/objio_osd.c | 2 +- fs/nfs/objlayout/objlayout.h | 2 +- sound/soc/codecs/wm8974.c | 2 +- tools/perf/tests/attr.c | 2 +- tools/perf/tests/parse-events.c | 2 +- 16 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 7841c3b..19f5d80 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1314,13 +1314,13 @@ static irqreturn_t gsc_irq_handler(int irq, void *dev_id) status = gsc_read(GSC_IRQ); if (status & GSC_IRQ_STATUS_OR_IRQ) { - dev_err(ippdrv->dev, "occured overflow at %d, status 0x%x.\n", + dev_err(ippdrv->dev, "occurred overflow at %d, status 0x%x.\n", ctx->id, status); return IRQ_NONE; } if (status & GSC_IRQ_STATUS_OR_FRM_DONE) { - dev_dbg(ippdrv->dev, "occured frame done at %d, status 0x%x.\n", + dev_dbg(ippdrv->dev, "occurred frame done at %d, status 0x%x.\n", ctx->id, status); buf_id[EXYNOS_DRM_OPS_SRC] = gsc_get_src_buf_index(ctx); diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index 63502e7..7618fda 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -54,7 +54,7 @@ MODULE_PARM_DESC(debug, "enable debug messages"); unsigned int fw_debug; module_param(fw_debug, int, 0644); -MODULE_PARM_DESC(fw_debug, "Firware debug level def:2"); +MODULE_PARM_DESC(fw_debug, "Firmware debug level def:2"); unsigned int encoder_buffers = SAA7164_MAX_ENCODER_BUFFERS; module_param(encoder_buffers, int, 0644); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 79fbe38..0c81915 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -402,7 +402,7 @@ config RTC_DRV_TPS6586X tristate "TI TPS6586X RTC driver" depends on MFD_TPS6586X help - TI Power Managment IC TPS6586X supports RTC functionality + TI Power Management IC TPS6586X supports RTC functionality along with alarm. This driver supports the RTC driver for the TPS6586X RTC module. @@ -420,7 +420,7 @@ config RTC_DRV_TPS80031 tristate "TI TPS80031/TPS80032 RTC driver" depends on MFD_TPS80031 help - TI Power Managment IC TPS80031 supports RTC functionality + TI Power Management IC TPS80031 supports RTC functionality along with alarm. This driver supports the RTC driver for the TPS80031 RTC module. diff --git a/drivers/rtc/rtc-max8997.c b/drivers/rtc/rtc-max8997.c index 00e505b..f15202c 100644 --- a/drivers/rtc/rtc-max8997.c +++ b/drivers/rtc/rtc-max8997.c @@ -24,7 +24,7 @@ /* Module parameter for WTSR function control */ static int wtsr_en = 1; module_param(wtsr_en, int, 0444); -MODULE_PARM_DESC(wtsr_en, "Wachdog Timeout & Sofware Reset (default=on)"); +MODULE_PARM_DESC(wtsr_en, "Watchdog Timeout & Software Reset (default=on)"); /* Module parameter for SMPL function control */ static int smpl_en = 1; module_param(smpl_en, int, 0444); diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index db46143..d36f34e 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -672,7 +672,7 @@ static int iowarrior_release(struct inode *inode, struct file *file) retval = -ENODEV; /* close called more than once */ mutex_unlock(&dev->mutex); } else { - dev->opened = 0; /* we're closeing now */ + dev->opened = 0; /* we're closing now */ retval = 0; if (dev->present) { /* @@ -802,7 +802,7 @@ static int iowarrior_probe(struct usb_interface *interface, /* this one will match for the IOWarrior56 only */ dev->int_out_endpoint = endpoint; } - /* we have to check the report_size often, so remember it in the endianess suitable for our machine */ + /* we have to check the report_size often, so remember it in the endianness suitable for our machine */ dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint); if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) && (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56)) diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 29cad9e..e129cf6 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -705,7 +705,7 @@ static int uss720_probe(struct usb_interface *intf, return -ENODEV; } i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2); - dev_dbg(&intf->dev, "set inteface result %d\n", i); + dev_dbg(&intf->dev, "set interface result %d\n", i); interface = intf->cur_altsetting; diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c index 7fa1bf8..87b2bb3 100644 --- a/drivers/video/amifb.c +++ b/drivers/video/amifb.c @@ -1181,7 +1181,7 @@ static int ami_decode_var(struct fb_var_screeninfo *var, struct amifb_par *par, } /* - * FB_VMODE_SMOOTH_XPAN will be cleared, if one of the folloing + * FB_VMODE_SMOOTH_XPAN will be cleared, if one of the following * checks failed and smooth scrolling is not possible */ diff --git a/drivers/video/auo_k190x.c b/drivers/video/auo_k190x.c index 53846cb..47e6770 100644 --- a/drivers/video/auo_k190x.c +++ b/drivers/video/auo_k190x.c @@ -935,7 +935,7 @@ int auok190x_common_probe(struct platform_device *pdev, goto err_defio; } - dev_dbg(info->device, "targetting %d frames per second\n", board->fps); + dev_dbg(info->device, "targeting %d frames per second\n", board->fps); info->fbdefio->delay = HZ / board->fps; info->fbdefio->first_io = auok190xfb_dpy_first_io, info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io, diff --git a/drivers/video/goldfishfb.c b/drivers/video/goldfishfb.c index 489abb3..7f6c9e6 100644 --- a/drivers/video/goldfishfb.c +++ b/drivers/video/goldfishfb.c @@ -148,7 +148,7 @@ static int goldfish_fb_pan_display(struct fb_var_screeninfo *var, wait_event_timeout(fb->wait, fb->base_update_count != base_update_count, HZ / 15); if (fb->base_update_count == base_update_count) - pr_err("goldfish_fb_pan_display: timeout wating for base update\n"); + pr_err("goldfish_fb_pan_display: timeout waiting for base update\n"); return 0; } diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index 76d9053..05c2dc3 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -862,7 +862,7 @@ static int s1d13xxxfb_probe(struct platform_device *pdev) printk(KERN_INFO PFX "unknown chip production id %i, revision %i\n", prod_id, revision); - printk(KERN_INFO PFX "please contant maintainer\n"); + printk(KERN_INFO PFX "please contact maintainer\n"); goto bail; } diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c index 395cb6a..9ef05d3 100644 --- a/drivers/video/ssd1307fb.c +++ b/drivers/video/ssd1307fb.c @@ -1,5 +1,5 @@ /* - * Driver for the Solomon SSD1307 OLED controler + * Driver for the Solomon SSD1307 OLED controller * * Copyright 2012 Free Electrons * @@ -392,6 +392,6 @@ static struct i2c_driver ssd1307fb_driver = { module_i2c_driver(ssd1307fb_driver); -MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controler"); +MODULE_DESCRIPTION("FB driver for the Solomon SSD1307 OLED controller"); MODULE_AUTHOR("Maxime Ripard <maxime.rip...@free-electrons.com>"); MODULE_LICENSE("GPL"); diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 88f9611..5457745 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -234,7 +234,7 @@ static int __alloc_objio_seg(unsigned numdevs, gfp_t gfp_flags, lseg = kzalloc(lseg_size, gfp_flags); if (unlikely(!lseg)) { - dprintk("%s: Faild allocation numdevs=%d size=%zd\n", __func__, + dprintk("%s: Failed allocation numdevs=%d size=%zd\n", __func__, numdevs, lseg_size); return -ENOMEM; } diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h index 880ba08..87aa1de 100644 --- a/fs/nfs/objlayout/objlayout.h +++ b/fs/nfs/objlayout/objlayout.h @@ -114,7 +114,7 @@ extern int objio_alloc_lseg(struct pnfs_layout_segment **outp, gfp_t gfp_flags); extern void objio_free_lseg(struct pnfs_layout_segment *lseg); -/* objio_free_result will free these @oir structs recieved from +/* objio_free_result will free these @oir structs received from * objlayout_{read,write}_done */ extern void objio_free_result(struct objlayout_io_res *oir); diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index b47c252..a2d01d1 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -125,7 +125,7 @@ SOC_ENUM("Equaliser EQ4 Bandwidth", wm8974_enum[9]), SOC_ENUM("EQ4 Cut Off", wm8974_enum[10]), SOC_SINGLE_TLV("EQ4 Volume", WM8974_EQ4, 0, 24, 1, eq_tlv), -SOC_ENUM("Equaliser EQ5 Bandwith", wm8974_enum[11]), +SOC_ENUM("Equaliser EQ5 Bandwidth", wm8974_enum[11]), SOC_ENUM("EQ5 Cut Off", wm8974_enum[12]), SOC_SINGLE_TLV("EQ5 Volume", WM8974_EQ5, 0, 24, 1, eq_tlv), diff --git a/tools/perf/tests/attr.c b/tools/perf/tests/attr.c index bdcceb8..e825732 100644 --- a/tools/perf/tests/attr.c +++ b/tools/perf/tests/attr.c @@ -173,6 +173,6 @@ int test__attr(void) !lstat(path_perf, &st)) return run_dir(path_dir, path_perf); - fprintf(stderr, " (ommitted)"); + fprintf(stderr, " (omitted)"); return 0; } diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c index c5636f3..63986f9 100644 --- a/tools/perf/tests/parse-events.c +++ b/tools/perf/tests/parse-events.c @@ -1321,7 +1321,7 @@ static int test_pmu_events(void) ret = stat(path, &st); if (ret) { - pr_debug("ommiting PMU cpu events tests\n"); + pr_debug("omitting PMU cpu events tests\n"); return 0; } -- 1.8.2.451.gbfd70c5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/