All regulators have ascendant voltage list in this driver.
Some regulators have more than 200 supported voltages.
e.g.
For TPS65910_REG_VDD1 and TPS65910_REG_VDD2:
n_voltages = VDD1_2_NUM_VOLT_FINE * VDD1_2_NUM_VOLT_COARSE
           = 73 * 3
           = 219

Thus it worth converting to regulator_map_voltage_ascend rather than use
default regulator_map_voltage_iterate.

For consistent, convert all regulators to regulator_map_voltage_ascend.

Signed-off-by: Axel Lin <[email protected]>
---
 drivers/regulator/tps65910-regulator.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/regulator/tps65910-regulator.c 
b/drivers/regulator/tps65910-regulator.c
index 6ba6931..45c1644 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -748,6 +748,7 @@ static struct regulator_ops tps65910_ops_dcdc = {
        .set_voltage_sel        = tps65910_set_voltage_dcdc_sel,
        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
        .list_voltage           = tps65910_list_voltage_dcdc,
+       .map_voltage            = regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65910_ops_vdd3 = {
@@ -758,6 +759,7 @@ static struct regulator_ops tps65910_ops_vdd3 = {
        .get_mode               = tps65910_get_mode,
        .get_voltage            = tps65910_get_voltage_vdd3,
        .list_voltage           = regulator_list_voltage_table,
+       .map_voltage            = regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65910_ops = {
@@ -769,6 +771,7 @@ static struct regulator_ops tps65910_ops = {
        .get_voltage_sel        = tps65910_get_voltage_sel,
        .set_voltage_sel        = tps65910_set_voltage_sel,
        .list_voltage           = regulator_list_voltage_table,
+       .map_voltage            = regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65911_ops = {
@@ -780,6 +783,7 @@ static struct regulator_ops tps65911_ops = {
        .get_voltage_sel        = tps65911_get_voltage_sel,
        .set_voltage_sel        = tps65911_set_voltage_sel,
        .list_voltage           = tps65911_list_voltage,
+       .map_voltage            = regulator_map_voltage_ascend,
 };
 
 static int tps65910_set_ext_sleep_config(struct tps65910_reg *pmic,
-- 
1.7.10.4



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to