From: Lad, Prabhakar <prabhakar.cse...@gmail.com>
add OF support for the mt9p031 sensor driver.
Signed-off-by: Lad, Prabhakar <prabhakar.cse...@gmail.com>
Cc: Hans Verkuil <hans.verk...@cisco.com>
Cc: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mche...@redhat.com>
Cc: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
Cc: Sylwester Nawrocki <s.nawro...@samsung.com>
Cc: Sakari Ailus <sakari.ai...@iki.fi>
Cc: Grant Likely <grant.lik...@secretlab.ca>
Cc: Rob Herring <rob.herr...@calxeda.com>
Cc: Rob Landley <r...@landley.net>
Cc: devicetree-disc...@lists.ozlabs.org
Cc: linux-...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
.../devicetree/bindings/media/i2c/mt9p031.txt | 43 ++++++++++++++
drivers/media/i2c/mt9p031.c | 61 +++++++++++++++++++-
2 files changed, 103 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9p031.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
new file mode 100644
index 0000000..b985e63
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
@@ -0,0 +1,43 @@
+* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
+an active imaging pixel array of 2592H x 1944V. It incorporates sophisticated
+camera functions on-chip such as windowing, column and row skip mode, and
+snapshot mode. It is programmable through a simple two-wire serial interface.
+
+The MT9P031 is a progressive-scan sensor that generates a stream of pixel data
+at a constant frame rate. It uses an on-chip, phase-locked loop (PLL) to
+generate all internal clocks from a single master input clock running between 6
+and 27 MHz. The maximum pixel rate is 96 Mp/s, corresponding to a clock rate of
+96 MHz.
+
+Required Properties :
+- compatible : value should be either one among the following
+ (a) "aptina,mt9p031-sensor" for mt9p031 sensor
+ (b) "aptina,mt9p031m-sensor" for mt9p031m sensor
+
+- ext_freq: Input clock frequency.
+
+- target_freq: Pixel clock frequency.
+
+Optional Properties :
+-reset: Chip reset GPIO (If not specified defaults to -1)
+
+Example:
+
+i2c0@1c22000 {
+ ...
+ ...
+ mt9p031@5d {
+ compatible = "aptina,mt9p031-sensor";
+ reg = <0x5d>;
+
+ port {
+ mt9p031_1: endpoint {
+ ext_freq = <6000000>;
+ target_freq = <96000000>;
+ };
+ };
+ };
+ ...
+};
\ No newline at end of file
diff --git a/drivers/media/i2c/mt9p031.c b/drivers/media/i2c/mt9p031.c
index 28cf95b..66078a6 100644
--- a/drivers/media/i2c/mt9p031.c
+++ b/drivers/media/i2c/mt9p031.c
@@ -23,11 +23,13 @@
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
+#include <linux/of_device.h>
#include <media/mt9p031.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-of.h>
#include <media/v4l2-subdev.h>
#include "aptina-pll.h"
@@ -928,10 +930,66 @@ static const struct v4l2_subdev_internal_ops
mt9p031_subdev_internal_ops = {
* Driver initialization and probing
*/
+#if defined(CONFIG_OF)
+static const struct of_device_id mt9p031_of_match[] = {
+ {.compatible = "aptina,mt9p031-sensor", },
+ {.compatible = "aptina,mt9p031m-sensor", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt9p031_of_match);
+
+static struct mt9p031_platform_data
+ *mt9p031_get_pdata(struct i2c_client *client)
+
+{
+ if (!client->dev.platform_data && client->dev.of_node) {
+ struct device_node *np;
+ struct mt9p031_platform_data *pdata;
+ int ret;
+
+ np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+ if (!np)
+ return NULL;
+
+ pdata = devm_kzalloc(&client->dev,
+ sizeof(struct mt9p031_platform_data),
+ GFP_KERNEL);
+ if (!pdata) {
+ pr_warn("mt9p031 failed allocate memeory\n");
+ return NULL;
+ }
+ ret = of_property_read_u32(np, "reset", &pdata->reset);
+ if (ret == -EINVAL)
+ pdata->reset = -1;
+ else if (ret == -ENODATA)
+ return NULL;
+
+ if (of_property_read_u32(np, "ext_freq", &pdata->ext_freq))
+ return NULL;
+
+ if (of_property_read_u32(np, "target_freq",
+ &pdata->target_freq))
+ return NULL;
+
+ return pdata;
+ }
+
+ return NULL;
+}
+#else
+#define mt9p031_of_match NULL
+
+static struct mt9p031_platform_data
+ *mt9p031_get_pdata(struct i2c_client *client)
+{
+ return client->dev.platform_data;
+}
+#endif
+
static int mt9p031_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
- struct mt9p031_platform_data *pdata = client->dev.platform_data;
+ struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client);
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct mt9p031 *mt9p031;
unsigned int i;
@@ -1072,6 +1130,7 @@ MODULE_DEVICE_TABLE(i2c, mt9p031_id);
static struct i2c_driver mt9p031_i2c_driver = {
.driver = {
+ .of_match_table = mt9p031_of_match,
.name = "mt9p031",
},
.probe = mt9p031_probe,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
