This is the third and smallest of the SoC specific updates.
Changes include:
* SMP support for the Xilinx zynq platform
* Smaller imx changes
* LPAE support for mvebu
* Moving the orion5x, kirkwood, dove and mvebu platforms
to a common "mbus" driver for their internal devices.
It would be good to get feedback on the location of the "mbus"
driver. Since this is used on multiple platforms may potentially
get shared with other architectures (powerpc and arm64), it
was moved to drivers/bus/. We expect other similar drivers to
get moved to the same place in order to avoid creating more
top-level directories under drivers/ or cluttering up the
messy drivers/misc/ even more.
Conflicts:
- drivers/gpio/gpio-pl061.c had a trivial add/add conflict that
got resolved in two different ways, both of which are ok.
-------------------------------------------------------------
The following changes since commit
48f934c Merge tag 'soc-for-linus-2' into for-next
are available in the git repository at
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
tags/soc-for-linus-3
you to fetch changes up to
5c5f042 ARM: imx: reset_controller may be disabled
-------------------------------------------------------------
Anson Huang (3):
ARM: imx: enable anatop suspend/resume
ARM: imx: enable periphery well bias for suspend
ARM: imx: enable RBC to support anatop LPM mode
Arnd Bergmann (6):
Merge branch 'zynq/core-smp' of git://git.xilinx.com/linux-xlnx into
next/soc2
Merge branch 'gic/cleanup' into next/soc2
Merge tag 'renesas-soc-r8a7779-for-v3.10' of
git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-soc-r8a7778-for-v3.10' of
git://git.kernel.org/.../horms/renesas into next/soc2
ARM: imx: reset_controller may be disabled
Merge tag 'soc-for-linus-3' into for-next
Fabio Estevam (3):
ARM: mach-imx: anatop: Include "common.h"
ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
Gregory CLEMENT (1):
ARM: mvebu: Limit the DMA zone when LPAE is selected
Gwenhael Goavec-Merou (1):
ARM: imx1: mm: add call to mxc_device_init
Jason Cooper (2):
Merge tag 'tags/cleanup_for_v3.10' into mvebu/soc
Merge tag 'tags/drivers_for_v3.10' into mvebu/soc
Kuninori Morimoto (2):
ARM: shmobile: r8a7779: add each clocks ratio on comment area
sh-pfc: r8a7779: tidyup intc_irq3_b typo
Lior Amsalem (1):
ARM: mvebu: Align the internal registers virtual base to support LPAE
Markus Pargmann (1):
ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0
Martin Fuzzey (1):
ARM: i.MX53 Add the cko1, cko2 clock outputs.
Michal Simek (7):
arm: zynq: Load scu baseaddress at run time
arm: zynq: Move slcr initialization to separate file
arm: zynq: Add support for system reset
arm: zynq: Get rid of xilinx function prefix
arm: zynq: Add smp_twd timer
arm: zynq: Add smp support
arm: zynq: Add hotplug support
Neil Greatorex (1):
bus: mvebu-mbus: Restore checking for coherency fabric hardware
Olof Johansson (6):
Merge tag 'renesas-soc2-for-v3.10' of
git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-pinmux2-for-v3.10' of
git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-pinmux-fixes-for-v3.10' of
git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'renesas-soc-r8a7790-for-v3.10' of
git://git.kernel.org/.../horms/renesas into next/soc2
Merge tag 'imx-soc-3.10' of
git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc2
Merge tag 'soc_for_v3.10' of git://git.infradead.org/users/jcooper/linux
into next/soc2
Philipp Zabel (14):
ARM i.MX53: Add GPU clocks to clock tree
ARM i.MX6q: export imx6q_revision
ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags
ARM i.MX53: fix ldb di divider and selector clocks
ARM i.MX6q: fix ldb di divider and selector clocks
ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1
ARM i.MX6q: set the LDB serial clock parent to the video PLL
ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset
Controller (SRC)
staging: drm/imx: Use SRC to reset IPU
ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
ARM i.MX53: Remove unused tve_gate clkdev entry
ARM i.MX53: make tve_ext_sel propagate rate change to PLL
ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
Sascha Hauer (1):
ARM: i.MX5: Add PATA and SRTC clocks
Sergei Shtylyov (1):
ARM: shmobile: R8A7779: add Ether support
Shawn Guo (6):
Merge tag 'imx-fixes-3.9-5' into imx/soc
Merge tag 'imx-cleanup-3.10' into imx/soc
Merge remote-tracking branch 'pza/reset/for_v3.10' into imx/soc
ARM: imx: do not use regmap_read for ANADIG_DIGPROG
ARM: imx: add initial imx6dl support
ARM: imx: do not bring up unavailable cores
Simon Guinot (1):
ARM: Orion: add dbg_show function to gpio-orion driver
Thomas Petazzoni (8):
bus: introduce an Marvell EBU MBus driver
bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood
arm: mach-mvebu: convert to use mvebu-mbus driver
arm: mach-kirkwood: convert to use mvebu-mbus driver
arm: mach-dove: convert to use mvebu-mbus driver
arm: mach-orion5x: convert to use mvebu-mbus driver
arm: mach-mv78xx0: convert to use the mvebu-mbus driver
arm: plat-orion: remove addr-map code
.../devicetree/bindings/clock/imx5-clock.txt | 14 +-
.../devicetree/bindings/clock/imx6q-clock.txt | 3 +
.../devicetree/bindings/reset/fsl,imx-src.txt | 49 ++
.../bindings/staging/imx-drm/fsl-imx-drm.txt | 3 +
arch/arm/Kconfig | 4 +
arch/arm/Kconfig.debug | 4 +-
arch/arm/boot/dts/armada-370-xp.dtsi | 5 -
arch/arm/boot/dts/zynq-7000.dtsi | 7 +
arch/arm/configs/imx_v4_v5_defconfig | 1 +
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/include/debug/mvebu.S | 2 +-
arch/arm/mach-dove/Makefile | 2 +-
arch/arm/mach-dove/addr-map.c | 125 ---
arch/arm/mach-dove/board-dt.c | 2 +-
arch/arm/mach-dove/common.c | 39 +-
arch/arm/mach-dove/common.h | 2 +-
arch/arm/mach-dove/include/mach/dove.h | 5 +
arch/arm/mach-imx/Kconfig | 10 +-
arch/arm/mach-imx/Makefile | 1 +
arch/arm/mach-imx/anatop.c | 103 +++
arch/arm/mach-imx/clk-imx51-imx53.c | 75 +-
arch/arm/mach-imx/clk-imx6q.c | 126 ++-
arch/arm/mach-imx/clk.h | 17 +
arch/arm/mach-imx/common.h | 10 +-
arch/arm/mach-imx/gpc.c | 23 +-
arch/arm/mach-imx/mach-imx6q.c | 74 +-
arch/arm/mach-imx/mm-imx1.c | 2 +
arch/arm/mach-imx/mxc.h | 11 +
arch/arm/mach-imx/platsmp.c | 4 +-
arch/arm/mach-imx/pm-imx6q.c | 4 +-
arch/arm/mach-imx/src.c | 66 ++
arch/arm/mach-kirkwood/Makefile | 2 +-
arch/arm/mach-kirkwood/addr-map.c | 91 ---
arch/arm/mach-kirkwood/board-dt.c | 2 +-
arch/arm/mach-kirkwood/common.c | 38 +-
arch/arm/mach-kirkwood/common.h | 2 +-
arch/arm/mach-kirkwood/include/mach/kirkwood.h | 7 +-
arch/arm/mach-kirkwood/pcie.c | 1 -
arch/arm/mach-mv78xx0/Makefile | 2 +-
arch/arm/mach-mv78xx0/addr-map.c | 93 ---
arch/arm/mach-mv78xx0/common.c | 10 +-
arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 9 +-
arch/arm/mach-mv78xx0/pcie.c | 21 +-
arch/arm/mach-mvebu/Kconfig | 2 +
arch/arm/mach-mvebu/Makefile | 2 +-
arch/arm/mach-mvebu/addr-map.c | 137 ----
arch/arm/mach-mvebu/armada-370-xp.c | 18 +
arch/arm/mach-mvebu/armada-370-xp.h | 8 +-
arch/arm/mach-mvebu/platsmp.c | 2 +
arch/arm/mach-orion5x/Makefile | 2 +-
arch/arm/mach-orion5x/addr-map.c | 155 ----
arch/arm/mach-orion5x/board-dt.c | 2 +-
arch/arm/mach-orion5x/common.c | 49 +-
arch/arm/mach-orion5x/common.h | 13 +-
arch/arm/mach-orion5x/d2net-setup.c | 4 +-
arch/arm/mach-orion5x/db88f5281-setup.c | 13 +-
arch/arm/mach-orion5x/dns323-setup.c | 3 +-
arch/arm/mach-orion5x/edmini_v2-setup.c | 4 +-
arch/arm/mach-orion5x/include/mach/orion5x.h | 6 +-
arch/arm/mach-orion5x/kurobox_pro-setup.c | 8 +-
arch/arm/mach-orion5x/ls-chl-setup.c | 4 +-
arch/arm/mach-orion5x/ls_hgl-setup.c | 4 +-
arch/arm/mach-orion5x/lsmini-setup.c | 4 +-
arch/arm/mach-orion5x/mss2-setup.c | 3 +-
arch/arm/mach-orion5x/mv2120-setup.c | 3 +-
arch/arm/mach-orion5x/net2big-setup.c | 4 +-
arch/arm/mach-orion5x/pci.c | 7 +-
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 4 +-
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 4 +-
arch/arm/mach-orion5x/rd88f5182-setup.c | 7 +-
arch/arm/mach-orion5x/terastation_pro2-setup.c | 4 +-
arch/arm/mach-orion5x/ts209-setup.c | 4 +-
arch/arm/mach-orion5x/ts409-setup.c | 4 +-
arch/arm/mach-orion5x/wnr854t-setup.c | 4 +-
arch/arm/mach-orion5x/wrt350n-v2-setup.c | 4 +-
arch/arm/mach-shmobile/clock-r8a7779.c | 23 +-
arch/arm/mach-shmobile/include/mach/r8a7779.h | 2 +
arch/arm/mach-shmobile/setup-r8a7779.c | 23 +-
arch/arm/mach-zynq/Kconfig | 1 +
arch/arm/mach-zynq/Makefile | 6 +-
arch/arm/mach-zynq/common.c | 67 +-
arch/arm/mach-zynq/common.h | 20 +
arch/arm/mach-zynq/headsmp.S | 24 +
arch/arm/mach-zynq/hotplug.c | 104 +++
arch/arm/mach-zynq/platsmp.c | 136 ++++
arch/arm/mach-zynq/slcr.c | 125 +++
arch/arm/plat-orion/Makefile | 6 -
arch/arm/plat-orion/addr-map.c | 178 -----
arch/arm/plat-orion/gpio.c | 59 ++
drivers/bus/Kconfig | 7 +
drivers/bus/Makefile | 1 +
drivers/bus/mvebu-mbus.c | 870 +++++++++++++++++++++
drivers/gpio/gpio-pl061.c | 2 +-
drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 2 +-
drivers/staging/imx-drm/ipu-v3/ipu-common.c | 12 +-
include/linux/mbus.h | 27 +-
96 files changed, 2257 insertions(+), 1002 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
