From: Srinivas Kandagatla <srinivas.kandaga...@st.com>

The STiH416 is advanced HD AVC processor with 3D graphics acceleration
and 1.2-GHz ARM Cortex-A9 SMP CPU.

Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@st.com>
CC: Stephen Gallimore <stephen.gallim...@st.com>
CC: Stuart Menefy <stuart.men...@st.com>
---
 Documentation/arm/STiH41x/stih416-overview.txt |   12 +
 arch/arm/boot/dts/stih416-clock.dtsi           |   41 ++
 arch/arm/boot/dts/stih416-pinctrl.dtsi         |  718 ++++++++++++++++++++++++
 arch/arm/boot/dts/stih416.dtsi                 |  103 ++++
 arch/arm/boot/dts/stih416.h                    |   24 +
 arch/arm/configs/stih41x_defconfig             |    1 +
 arch/arm/mach-stih41x/Kconfig                  |    9 +
 arch/arm/mach-stih41x/board-dt.c               |    2 +-
 8 files changed, 909 insertions(+), 1 deletions(-)
 create mode 100644 Documentation/arm/STiH41x/stih416-overview.txt
 create mode 100644 arch/arm/boot/dts/stih416-clock.dtsi
 create mode 100644 arch/arm/boot/dts/stih416-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/stih416.dtsi
 create mode 100644 arch/arm/boot/dts/stih416.h

diff --git a/Documentation/arm/STiH41x/stih416-overview.txt 
b/Documentation/arm/STiH41x/stih416-overview.txt
new file mode 100644
index 0000000..e060867
--- /dev/null
+++ b/Documentation/arm/STiH41x/stih416-overview.txt
@@ -0,0 +1,12 @@
+                       STiH416 Overview
+                       ================
+
+Introduction
+------------
+
+    The STiH416 is the next generation of HD, AVC set-top box processors
+    for satellite, cable, terrestrial and IP-STB markets.
+
+    Features
+    - ARM Cortex-A9 1.2 GHz dual core CPU
+    - SATA2×2,USB 2.0×3, PCIe, Gbit Ethernet MAC×2
diff --git a/arch/arm/boot/dts/stih416-clock.dtsi 
b/arch/arm/boot/dts/stih416-clock.dtsi
new file mode 100644
index 0000000..7026bf1
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-clock.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics R&D Limited
+ * <stlinux-de...@stlinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+       clocks {
+               /*
+                * Fixed 30MHz oscillator inputs to SoC
+                */
+               CLK_SYSIN: CLK_SYSIN {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <30000000>;
+                       clock-output-names = "CLK_SYSIN";
+               };
+
+               /*
+                * ARM Peripheral clock for timers
+                */
+               arm_periph_clk: arm_periph_clk {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <600000000>;
+               };
+
+               /*
+                * Bootloader initialized system infrastructure clock for
+                * serial devices.
+                */
+               CLK_S_ICN_REG_0: clockgenA0@4 {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <100000000>;
+                       clock-output-names = "CLK_S_ICN_REG_0";
+               };
+       };
+};
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi 
b/arch/arm/boot/dts/stih416-pinctrl.dtsi
new file mode 100644
index 0000000..f1266bb
--- /dev/null
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -0,0 +1,718 @@
+
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandaga...@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stixxxx-pincfg.h"
+#include "stih416.h"
+/ {
+
+       aliases {
+               gpio0   = &PIO0;
+               gpio1   = &PIO1;
+               gpio2   = &PIO2;
+               gpio3   = &PIO3;
+               gpio4   = &PIO4;
+               gpio5   = &PIO40;
+               gpio6   = &PIO5;
+               gpio7   = &PIO6;
+               gpio8   = &PIO7;
+               gpio9   = &PIO8;
+               gpio10  = &PIO9;
+               gpio11  = &PIO10;
+               gpio12  = &PIO11;
+               gpio13  = &PIO12;
+               gpio14  = &PIO30;
+               gpio15  = &PIO31;
+               gpio16  = &PIO13;
+               gpio17  = &PIO14;
+               gpio18  = &PIO15;
+               gpio19  = &PIO16;
+               gpio20  = &PIO17;
+               gpio21  = &PIO18;
+               gpio22  = &PIO100;
+               gpio23  = &PIO101;
+               gpio24  = &PIO102;
+               gpio25  = &PIO103;
+               gpio26  = &PIO104;
+               gpio27  = &PIO105;
+               gpio28  = &PIO106;
+               gpio29  = &PIO107;
+       };
+
+
+       soc {
+               pin-controller {
+                       #address-cells  = <1>;
+                       #size-cells     = <1>;
+                       #retime-delay-cells     = <14>;
+                       compatible      = "st,stixxxx-pinctrl", "simple-bus";
+                       st,retime-in-delay      = <0 300 500 750 1000 1250 1500 
1750 2000 2250 2500 2750 3000 3250>;
+                       st,retime-out-delay     = <0 300 500 750 1000 1250 1500 
1750 2000 2250 2500 2750 3000 3250>;
+                       ranges;
+                       PIO0: pinctrl@fe610000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe610000 0x100>;
+                               st,bank-name    = "PIO0";
+                               st,alt-control  = <&SYSCFG_SBC(0) 0 31>;
+                               st,oe-control   = <&SYSCFG_SBC(40) 0 7>;
+                               st,pu-control   = <&SYSCFG_SBC(50) 0 7>;
+                               st,od-control   = <&SYSCFG_SBC(60) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_SBC(100) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_SBC(101) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_SBC(102) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_SBC(103) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_SBC(104) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_SBC(105) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_SBC(106) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_SBC(107) 0 
31>;
+                       };
+                       PIO1: pinctrl@fe611000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe611000 0x100>;
+                               st,bank-name    = "PIO1";
+                               st,alt-control  = <&SYSCFG_SBC(1) 0 31>;
+                               st,oe-control   = <&SYSCFG_SBC(40) 8 15>;
+                               st,pu-control   = <&SYSCFG_SBC(50) 8 15>;
+                               st,od-control   = <&SYSCFG_SBC(60) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_SBC(108) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_SBC(109) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_SBC(110) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_SBC(111) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_SBC(112) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_SBC(113) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_SBC(114) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_SBC(115) 0 
31>;
+                       };
+                       PIO2: pinctrl@fe612000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe612000 0x100>;
+                               st,bank-name    = "PIO2";
+                               st,alt-control  = <&SYSCFG_SBC(2) 0 31>;
+                               st,oe-control   = <&SYSCFG_SBC(40) 16 23>;
+                               st,pu-control   = <&SYSCFG_SBC(50) 16 23>;
+                               st,od-control   = <&SYSCFG_SBC(60) 16 23>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_SBC(116) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_SBC(117) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_SBC(118) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_SBC(119) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_SBC(120) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_SBC(121) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_SBC(122) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_SBC(123) 0 
31>;
+                       };
+                       PIO3: pinctrl@fe613000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe613000 0x100>;
+                               st,bank-name    = "PIO3";
+                               st,alt-control  = <&SYSCFG_SBC(3) 0 31>;
+                               st,oe-control   = <&SYSCFG_SBC(40) 24 31>;
+                               st,pu-control   = <&SYSCFG_SBC(50) 24 31>;
+                               st,od-control   = <&SYSCFG_SBC(60) 24 31>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_SBC(124) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_SBC(125) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_SBC(126) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_SBC(127) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_SBC(128) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_SBC(129) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_SBC(130) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_SBC(131) 0 
31>;
+                       };
+
+                       PIO4: pinctrl@fe614000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe614000 0x100>;
+                               st,bank-name    = "PIO4";
+                               st,alt-control  = <&SYSCFG_SBC(4) 0 31>;
+                               st,oe-control   = <&SYSCFG_SBC(41) 0 7>;
+                               st,pu-control   = <&SYSCFG_SBC(51) 0 7>;
+                               st,od-control   = <&SYSCFG_SBC(61) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_SBC(132) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_SBC(133) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_SBC(134) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_SBC(135) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_SBC(136) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_SBC(137) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_SBC(138) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_SBC(139) 0 
31>;
+                       };
+
+                       PIO40: pinctrl@fe615000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe615000 0x100>;
+                               st,bank-name    = "PIO40";
+                               st,alt-control  = <&SYSCFG_SBC(5) 0 31>;
+                               st,oe-control   = <&SYSCFG_SBC(41) 8 15>;
+                               st,pu-control   = <&SYSCFG_SBC(51) 8 15>;
+                               st,od-control   = <&SYSCFG_SBC(61) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0x7f>;
+                               st,retime-control0      = <&SYSCFG_SBC(140) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_SBC(141) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_SBC(142) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_SBC(143) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_SBC(144) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_SBC(145) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_SBC(146) 0 
31>;
+                       };
+
+                       PIO5: pinctrl@fee00000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee00000 0x100>;
+                               st,bank-name    = "PIO5";
+                               st,alt-control  = <&SYSCFG_FRONT(1000) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1040) 0 7>;
+                               st,pu-control   = <&SYSCFG_FRONT(1050) 0 7>;
+                               st,od-control   = <&SYSCFG_FRONT(1060) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1100) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1101) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1102) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1103) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1104) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1105) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1106) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1107) 
0 31>;
+                       };
+                       PIO6: pinctrl@fee01000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee01000 0x100>;
+                               st,bank-name    = "PIO6";
+                               st,alt-control  = <&SYSCFG_FRONT(1001) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1040) 8 15>;
+                               st,pu-control   = <&SYSCFG_FRONT(1050) 8 15>;
+                               st,od-control   = <&SYSCFG_FRONT(1060) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1108) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1109) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1110) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1111) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1112) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1113) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1114) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1115) 
0 31>;
+                       };
+                       PIO7: pinctrl@fee02000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee02000 0x100>;
+                               st,bank-name    = "PIO7";
+                               st,alt-control  = <&SYSCFG_FRONT(1002) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1040) 16 23>;
+                               st,pu-control   = <&SYSCFG_FRONT(1050) 16 23>;
+                               st,od-control   = <&SYSCFG_FRONT(1060) 16 23>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1116) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1117) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1118) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1119) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1120) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1121) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1122) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1123) 
0 31>;
+                       };
+                       PIO8: pinctrl@fee03000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee03000 0x100>;
+                               st,bank-name    = "PIO8";
+                               st,alt-control  = <&SYSCFG_FRONT(1003) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1040) 24 31>;
+                               st,pu-control   = <&SYSCFG_FRONT(1050) 24 31>;
+                               st,od-control   = <&SYSCFG_FRONT(1060) 24 31>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1124) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1125) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1126) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1127) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1128) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1129) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1130) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1131) 
0 31>;
+                       };
+
+                       PIO9: pinctrl@fee04000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee04000 0x100>;
+                               st,bank-name    = "PIO9";
+                               st,alt-control  = <&SYSCFG_FRONT(1004) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1041) 0 7>;
+                               st,pu-control   = <&SYSCFG_FRONT(1051) 0 7>;
+                               st,od-control   = <&SYSCFG_FRONT(1061) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1132) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1133) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1134) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1135) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1136) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1137) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1138) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1139) 
0 31>;
+                       };
+                       PIO10: pinctrl@fee05000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee05000 0x100>;
+                               st,bank-name    = "PIO10";
+                               st,alt-control  = <&SYSCFG_FRONT(1005) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1041) 8 15>;
+                               st,pu-control   = <&SYSCFG_FRONT(1051) 8 15>;
+                               st,od-control   = <&SYSCFG_FRONT(1061) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1140) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1141) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1142) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1143) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1144) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1145) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1146) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1147) 
0 31>;
+                       };
+                       PIO11: pinctrl@fee06000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee06000 0x100>;
+                               st,bank-name    = "PIO11";
+                               st,alt-control  = <&SYSCFG_FRONT(1006) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1041) 16 23>;
+                               st,pu-control   = <&SYSCFG_FRONT(1051) 16 23>;
+                               st,od-control   = <&SYSCFG_FRONT(1061) 16 23>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1148) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1149) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1150) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1151) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1152) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1153) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1154) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1155) 
0 31>;
+                       };
+                       PIO12: pinctrl@fee07000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee07000 0x100>;
+                               st,bank-name    = "PIO12";
+                               st,alt-control  = <&SYSCFG_FRONT(1007) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1041) 24 31>;
+                               st,pu-control   = <&SYSCFG_FRONT(1051) 24 31>;
+                               st,od-control   = <&SYSCFG_FRONT(1061) 24 31>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1156) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1157) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1158) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1159) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1160) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1161) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1162) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1163) 
0 31>;
+                       };
+
+                       PIO30: pinctrl@fee08000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee08000 0x100>;
+                               st,bank-name    = "PIO30";
+                               st,alt-control  = <&SYSCFG_FRONT(1008) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1042) 0 7>;
+                               st,pu-control   = <&SYSCFG_FRONT(1052) 0 7>;
+                               st,od-control   = <&SYSCFG_FRONT(1062) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1164) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1165) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1166) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1167) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1168) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1169) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1170) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1171) 
0 31>;
+                       };
+
+                       PIO31: pinctrl@fee09000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfee09000 0x100>;
+                               st,bank-name    = "PIO31";
+                               st,alt-control  = <&SYSCFG_FRONT(1009) 0 31>;
+                               st,oe-control   = <&SYSCFG_FRONT(1042) 8 15>;
+                               st,pu-control   = <&SYSCFG_FRONT(1052) 8 15>;
+                               st,od-control   = <&SYSCFG_FRONT(1062) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_FRONT(1172) 
0 31>;
+                               st,retime-control1      = <&SYSCFG_FRONT(1173) 
0 31>;
+                               st,retime-control2      = <&SYSCFG_FRONT(1174) 
0 31>;
+                               st,retime-control3      = <&SYSCFG_FRONT(1175) 
0 31>;
+                               st,retime-control4      = <&SYSCFG_FRONT(1176) 
0 31>;
+                               st,retime-control5      = <&SYSCFG_FRONT(1177) 
0 31>;
+                               st,retime-control6      = <&SYSCFG_FRONT(1178) 
0 31>;
+                               st,retime-control7      = <&SYSCFG_FRONT(1179) 
0 31>;
+                       };
+
+
+
+                       PIO13: pinctrl@fe820000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe820000 0x100>;
+                               st,bank-name    = "PIO13";
+                               st,alt-control  = <&SYSCFG_REAR(2000) 0 31>;
+                               st,oe-control   = <&SYSCFG_REAR(2040) 0 7>;
+                               st,pu-control   = <&SYSCFG_REAR(2050) 0 7>;
+                               st,od-control   = <&SYSCFG_REAR(2060) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_REAR(2100) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_REAR(2101) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_REAR(2102) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_REAR(2103) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_REAR(2104) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_REAR(2105) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_REAR(2106) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_REAR(2107) 0 
31>;
+                       };
+                       PIO14: pinctrl@fe821000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe821000 0x100>;
+                               st,bank-name    = "PIO14";
+                               st,alt-control  = <&SYSCFG_REAR(2001) 0 31>;
+                               st,oe-control   = <&SYSCFG_REAR(2040) 8 15>;
+                               st,pu-control   = <&SYSCFG_REAR(2050) 8 15>;
+                               st,od-control   = <&SYSCFG_REAR(2060) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_REAR(2108) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_REAR(2109) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_REAR(2110) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_REAR(2111) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_REAR(2112) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_REAR(2113) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_REAR(2114) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_REAR(2115) 0 
31>;
+                       };
+                       PIO15: pinctrl@fe822000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe822000 0x100>;
+                               st,bank-name    = "PIO15";
+                               st,alt-control  = <&SYSCFG_REAR(2002) 0 31>;
+                               st,oe-control   = <&SYSCFG_REAR(2040) 16 23>;
+                               st,pu-control   = <&SYSCFG_REAR(2050) 16 23>;
+                               st,od-control   = <&SYSCFG_REAR(2060) 16 23>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_REAR(2116) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_REAR(2117) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_REAR(2118) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_REAR(2119) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_REAR(2120) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_REAR(2121) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_REAR(2122) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_REAR(2123) 0 
31>;
+                       };
+                       PIO16: pinctrl@fe823000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe823000 0x100>;
+                               st,bank-name    = "PIO16";
+                               st,alt-control  = <&SYSCFG_REAR(2003) 0 31>;
+                               st,oe-control   = <&SYSCFG_REAR(2040) 24 31>;
+                               st,pu-control   = <&SYSCFG_REAR(2050) 24 31>;
+                               st,od-control   = <&SYSCFG_REAR(2060) 24 31>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_REAR(2124) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_REAR(2125) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_REAR(2126) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_REAR(2127) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_REAR(2128) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_REAR(2129) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_REAR(2130) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_REAR(2131) 0 
31>;
+                       };
+
+                       PIO17: pinctrl@fe824000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe824000 0x100>;
+                               st,bank-name    = "PIO17";
+                               st,alt-control  = <&SYSCFG_REAR(2004) 0 31>;
+                               st,oe-control   = <&SYSCFG_REAR(2041) 0 7>;
+                               st,pu-control   = <&SYSCFG_REAR(2051) 0 7>;
+                               st,od-control   = <&SYSCFG_REAR(2061) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = <&SYSCFG_REAR(2132) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_REAR(2133) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_REAR(2134) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_REAR(2135) 0 
31>;
+                               st,retime-control4      = <&SYSCFG_REAR(2136) 0 
31>;
+                               st,retime-control5      = <&SYSCFG_REAR(2137) 0 
31>;
+                               st,retime-control6      = <&SYSCFG_REAR(2138) 0 
31>;
+                               st,retime-control7      = <&SYSCFG_REAR(2139) 0 
31>;
+                       };
+
+                       PIO18: pinctrl@fe825000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfe825000 0x100>;
+                               st,bank-name    = "PIO18";
+                               st,alt-control  = <&SYSCFG_REAR(2005) 0 31>;
+                               st,oe-control   = <&SYSCFG_REAR(2041) 8 15>;
+                               st,pu-control   = <&SYSCFG_REAR(2051) 8 15>;
+                               st,od-control   = <&SYSCFG_REAR(2061) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xf>;
+                               st,retime-control0      = <&SYSCFG_REAR(2140) 0 
31>;
+                               st,retime-control1      = <&SYSCFG_REAR(2141) 0 
31>;
+                               st,retime-control2      = <&SYSCFG_REAR(2142) 0 
31>;
+                               st,retime-control3      = <&SYSCFG_REAR(2143) 0 
31>;
+                       };
+                       PIO100: pinctrl@fd6b0000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd6b0000 0x100>;
+                               st,bank-name    = "PIO100";
+                               st,alt-control  = <&SYSCFG_FVDP_FE(5000) 0 31>;
+                               st,oe-control   = <&SYSCFG_FVDP_FE(5040) 0 7>;
+                               st,pu-control   = <&SYSCFG_FVDP_FE(5050) 0 7>;
+                               st,od-control   = <&SYSCFG_FVDP_FE(5060) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_FE(5100) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_FE(5101) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_FE(5102) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_FE(5103) 0 31>;
+                               st,retime-control4      = 
<&SYSCFG_FVDP_FE(5104) 0 31>;
+                               st,retime-control5      = 
<&SYSCFG_FVDP_FE(5105) 0 31>;
+                               st,retime-control6      = 
<&SYSCFG_FVDP_FE(5106) 0 31>;
+                               st,retime-control7      = 
<&SYSCFG_FVDP_FE(5107) 0 31>;
+                       };
+
+                       PIO101: pinctrl@fd6b1000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd6b1000 0x100>;
+                               st,bank-name    = "PIO101";
+                               st,alt-control  = <&SYSCFG_FVDP_FE(5001) 0 31>;
+                               st,oe-control   = <&SYSCFG_FVDP_FE(5040) 8 15>;
+                               st,pu-control   = <&SYSCFG_FVDP_FE(5050) 8 15>;
+                               st,od-control   = <&SYSCFG_FVDP_FE(5060) 8 15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_FE(5108) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_FE(5109) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_FE(5110) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_FE(5111) 0 31>;
+                               st,retime-control4      = 
<&SYSCFG_FVDP_FE(5112) 0 31>;
+                               st,retime-control5      = 
<&SYSCFG_FVDP_FE(5113) 0 31>;
+                               st,retime-control6      = 
<&SYSCFG_FVDP_FE(5114) 0 31>;
+                               st,retime-control7      = 
<&SYSCFG_FVDP_FE(5115) 0 31>;
+                       };
+
+                       PIO102: pinctrl@fd6b2000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd6b2000 0x100>;
+                               st,bank-name    = "PIO102";
+                               st,alt-control  = <&SYSCFG_FVDP_FE(5002) 0 31>;
+                               st,oe-control   = <&SYSCFG_FVDP_FE(5040) 16 23>;
+                               st,pu-control   = <&SYSCFG_FVDP_FE(5050) 16 23>;
+                               st,od-control   = <&SYSCFG_FVDP_FE(5060) 16 23>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_FE(5116) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_FE(5117) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_FE(5118) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_FE(5119) 0 31>;
+                               st,retime-control4      = 
<&SYSCFG_FVDP_FE(5120) 0 31>;
+                               st,retime-control5      = 
<&SYSCFG_FVDP_FE(5121) 0 31>;
+                               st,retime-control6      = 
<&SYSCFG_FVDP_FE(5122) 0 31>;
+                               st,retime-control7      = 
<&SYSCFG_FVDP_FE(5123) 0 31>;
+                       };
+
+
+
+                       PIO103: pinctrl@fd330000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd330000 0x100>;
+                               st,bank-name    = "PIO103";
+                               st,alt-control  = <&SYSCFG_FVDP_LITE(6000) 0 
31>;
+                               st,oe-control   = <&SYSCFG_FVDP_LITE(6040) 0 7>;
+                               st,pu-control   = <&SYSCFG_FVDP_LITE(6050) 0 7>;
+                               st,od-control   = <&SYSCFG_FVDP_LITE(6060) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_LITE(6100) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_LITE(6101) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_LITE(6102) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_LITE(6103) 0 31>;
+                               st,retime-control4      = 
<&SYSCFG_FVDP_LITE(6104) 0 31>;
+                               st,retime-control5      = 
<&SYSCFG_FVDP_LITE(6105) 0 31>;
+                               st,retime-control6      = 
<&SYSCFG_FVDP_LITE(6106) 0 31>;
+                               st,retime-control7      = 
<&SYSCFG_FVDP_LITE(6107) 0 31>;
+                       };
+                       PIO104: pinctrl@fd331000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd331000 0x100>;
+                               st,bank-name    = "PIO104";
+                               st,alt-control  = <&SYSCFG_FVDP_LITE(6001) 0 
31>;
+                               st,oe-control   = <&SYSCFG_FVDP_LITE(6040) 8 
15>;
+                               st,pu-control   = <&SYSCFG_FVDP_LITE(6050) 8 
15>;
+                               st,od-control   = <&SYSCFG_FVDP_LITE(6060) 8 
15>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_LITE(6108) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_LITE(6109) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_LITE(6110) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_LITE(6111) 0 31>;
+                               st,retime-control4      = 
<&SYSCFG_FVDP_LITE(6112) 0 31>;
+                               st,retime-control5      = 
<&SYSCFG_FVDP_LITE(6113) 0 31>;
+                               st,retime-control6      = 
<&SYSCFG_FVDP_LITE(6114) 0 31>;
+                               st,retime-control7      = 
<&SYSCFG_FVDP_LITE(6115) 0 31>;
+                       };
+                       PIO105: pinctrl@fd332000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd332000 0x100>;
+                               st,bank-name    = "PIO105";
+                               st,alt-control  = <&SYSCFG_FVDP_LITE(6002) 0 
31>;
+                               st,oe-control   = <&SYSCFG_FVDP_LITE(6040) 16 
23>;
+                               st,pu-control   = <&SYSCFG_FVDP_LITE(6050) 16 
23>;
+                               st,od-control   = <&SYSCFG_FVDP_LITE(6060) 16 
23>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_LITE(6116) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_LITE(6117) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_LITE(6118) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_LITE(6119) 0 31>;
+                               st,retime-control4      = 
<&SYSCFG_FVDP_LITE(6120) 0 31>;
+                               st,retime-control5      = 
<&SYSCFG_FVDP_LITE(6121) 0 31>;
+                               st,retime-control6      = 
<&SYSCFG_FVDP_LITE(6122) 0 31>;
+                               st,retime-control7      = 
<&SYSCFG_FVDP_LITE(6123) 0 31>;
+                       };
+                       PIO106: pinctrl@fd333000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd333000 0x100>;
+                               st,bank-name    = "PIO106";
+                               st,alt-control  = <&SYSCFG_FVDP_LITE(6003) 0 
31>;
+                               st,oe-control   = <&SYSCFG_FVDP_LITE(6040) 24 
31>;
+                               st,pu-control   = <&SYSCFG_FVDP_LITE(6050) 24 
31>;
+                               st,od-control   = <&SYSCFG_FVDP_LITE(6060) 24 
31>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xff>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_LITE(6124) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_LITE(6125) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_LITE(6126) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_LITE(6127) 0 31>;
+                               st,retime-control4      = 
<&SYSCFG_FVDP_LITE(6128) 0 31>;
+                               st,retime-control5      = 
<&SYSCFG_FVDP_LITE(6129) 0 31>;
+                               st,retime-control6      = 
<&SYSCFG_FVDP_LITE(6130) 0 31>;
+                               st,retime-control7      = 
<&SYSCFG_FVDP_LITE(6131) 0 31>;
+                       };
+
+                       PIO107: pinctrl@fd334000 {
+                               #gpio-cells     = <1>;
+                               compatible      = "st,stixxxx-gpio";
+                               gpio-controller;
+                               reg     = <0xfd334000 0x100>;
+                               st,bank-name    = "PIO107";
+                               st,alt-control  = <&SYSCFG_FVDP_LITE(6004) 0 
31>;
+                               st,oe-control   = <&SYSCFG_FVDP_LITE(6041) 0 7>;
+                               st,pu-control   = <&SYSCFG_FVDP_LITE(6051) 0 7>;
+                               st,od-control   = <&SYSCFG_FVDP_LITE(6061) 0 7>;
+                               st,retime-style = "dedicated";
+                               st,retime-pin-mask      = <0xf>;
+                               st,retime-control0      = 
<&SYSCFG_FVDP_LITE(6132) 0 31>;
+                               st,retime-control1      = 
<&SYSCFG_FVDP_LITE(6133) 0 31>;
+                               st,retime-control2      = 
<&SYSCFG_FVDP_LITE(6134) 0 31>;
+                               st,retime-control3      = 
<&SYSCFG_FVDP_LITE(6135) 0 31>;
+                       };
+
+                       uart2 {
+                               pinctrl_uart2: uart2-0 {
+                                       st,function = <ALT2>;
+                                       st,pins {
+                                               tx      = <&PIO17 4 OUT>;
+                                               rx      = <&PIO17 5 IN>;
+                                               output-enable   = <&PIO11 3 
OUT>;
+                                       };
+                               };
+                       };
+
+                       sbc_uart1 {
+                               pinctrl_sbc_uart1: sbc_uart1 {
+                                       st,function = <ALT3>;
+                                       st,pins {
+                                               tx      = <&PIO2 6 OUT>;
+                                               rx      = <&PIO2 7 IN>;
+                                       };
+                               };
+                       };
+               };
+       };
+};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
new file mode 100644
index 0000000..47439b3
--- /dev/null
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2012 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandaga...@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih416-clock.dtsi"
+#include "stih416-pinctrl.dtsi"
+/ {
+       L2: cache-controller {
+               compatible = "arm,pl310-cache";
+               reg = <0xfffe2000 0x1000>;
+               arm,data-latency = <3 3 3>;
+               arm,tag-latency = <2 2 2>;
+               cache-unified;
+               cache-level = <2>;
+       };
+
+       soc {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               #interrupt-cells = <3>;
+               interrupt-parent = <&intc>;
+               ranges;
+               compatible      = "simple-bus";
+
+               syscfg_sbc:syscon@fe600000{
+                       compatible      = "syscon";
+                       reg             = <0xfe600000 0x1000>;
+                       syscon-name     = "SYSCFG_SBC";
+               };
+               syscfg_front:syscon@fee10000{
+                       compatible      = "syscon";
+                       reg             = <0xfee10000 0x1000>;
+                       syscon-name     = "SYSCFG_FRONT";
+               };
+               syscfg_rear:syscon@fe830000{
+                       compatible      = "syscon";
+                       reg             = <0xfe830000 0x1000>;
+                       syscon-name     = "SYSCFG_REAR";
+               };
+
+               /* MPE */
+               syscfg_fvdp_fe:syscon@fddf0000{
+                       compatible      = "syscon";
+                       reg             = <0xfddf0000 0x1000>;
+                       syscon-name     = "SYSCFG_FVDP_FE";
+               };
+               syscfg_fvdp_lite:syscon@fd6a0000{
+                       compatible      = "syscon";
+                       reg             = <0xfd6a0000 0x1000>;
+                       syscon-name     = "SYSCFG_FVDP_LITE";
+               };
+
+               syscfg_cpu:syscon@fdde0000{
+                       compatible      = "syscon";
+                       reg             = <0xfdde0000 0x1000>;
+                       syscon-name     = "SYSCFG_CPU";
+               };
+
+               syscfg_compo:syscon@fd320000{
+                       compatible      = "syscon";
+                       reg             = <0xfd320000 0x1000>;
+                       syscon-name     = "SYSCFG_COMPO";
+               };
+
+               syscfg_transport:syscon@fd690000{
+                       compatible      = "syscon";
+                       reg             = <0xfd690000 0x1000>;
+                       syscon-name     = "SYSCFG_TRANSPORT";
+               };
+
+               syscfg_lpm:syscon@fe4b5100{
+                       compatible      = "syscon";
+                       reg             = <0xfe4b5100 0x54>;
+                       syscon-name     = "LPM_CFG_REGS";
+               };
+
+               uart2: uart@fed32000{
+                       compatible      = "st,asc";
+                       status          = "disabled";
+                       reg             = <0xfed32000 0x2c>;
+                       interrupts      = <0 197 0>;
+                       clocks          = <&CLK_S_ICN_REG_0>;
+                       pinctrl-names   = "default";
+                       pinctrl-0       = <&pinctrl_uart2>;
+               };
+
+               /* SBC_UART1 */
+               sbc_uart1: uart@fe531000 {
+                       compatible      = "st,asc";
+                       status          = "disabled";
+                       reg             = <0xfe531000 0x2c>;
+                       interrupts      = <0 210 0>;
+                       pinctrl-names   = "default";
+                       pinctrl-0       = <&pinctrl_sbc_uart1>;
+                       clocks          = <&CLK_SYSIN>;
+               };
+       };
+};
diff --git a/arch/arm/boot/dts/stih416.h b/arch/arm/boot/dts/stih416.h
new file mode 100644
index 0000000..2e27792
--- /dev/null
+++ b/arch/arm/boot/dts/stih416.h
@@ -0,0 +1,24 @@
+#ifndef __STIH416_H_
+#define __STIH416_H_
+
+#define CONFIG_SBC(num)                num
+#define CONFIG_FRONT(num)      (num - 1000)
+#define CONFIG_REAR(num)       (num - 2000)
+#define CONFIG_FVDP_FE(num)    (num - 5000)
+#define CONFIG_FVDP_LITE(num)  (num - 6000)
+#define CONFIG_CPU(num)                (num - 7000)
+#define CONFIG_COMPO(num)      (num - 8000)
+#define CONFIG_TRANSPORT(num)  (num - 9000)
+#define CONFIG_LPM(num)                num
+
+#define SYSCFG_SBC(num)                syscfg_sbc CONFIG_SBC(num)
+#define SYSCFG_FRONT(num)      syscfg_front CONFIG_FRONT(num)
+#define SYSCFG_REAR(num)       syscfg_rear CONFIG_REAR(num)
+#define SYSCFG_FVDP_FE(num)    syscfg_fvdp_fe CONFIG_FVDP_FE(num)
+#define SYSCFG_FVDP_LITE(num)  syscfg_fvdp_lite CONFIG_FVDP_LITE(num)
+#define SYSCFG_CPU(num)                syscfg_cpu CONFIG_CPU(num)
+#define SYSCFG_COMPO(num)      syscfg_compo CONFIG_COMPO(num)
+#define SYSCFG_TRANSPORT(num)  syscfg_transport CONFIG_TRANSPORT(num)
+#define SYSCFG_LPM(num)                syscfg_lpm CONFIG_LPM(num)
+
+#endif /* __STIH416_H_ */
diff --git a/arch/arm/configs/stih41x_defconfig 
b/arch/arm/configs/stih41x_defconfig
index dd9268b..cc4e2dc 100644
--- a/arch/arm/configs/stih41x_defconfig
+++ b/arch/arm/configs/stih41x_defconfig
@@ -24,6 +24,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_STIH41X=y
 CONFIG_SOC_STIH415=y
+CONFIG_SOC_STIH416=y
 # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
 # CONFIG_SWP_EMULATE is not set
 CONFIG_ARM_ERRATA_720789=y
diff --git a/arch/arm/mach-stih41x/Kconfig b/arch/arm/mach-stih41x/Kconfig
index 9c40540..848d3e8 100644
--- a/arch/arm/mach-stih41x/Kconfig
+++ b/arch/arm/mach-stih41x/Kconfig
@@ -31,5 +31,14 @@ config SOC_STIH415
          and other digital audio/video applications using Flattned Device
          Trees.
 
+config SOC_STIH416
+       bool "STiH416 STMicroelectronics Consumer Electronics family"
+       select PLAT_STIXXXX
+       help
+         This enables support for STMicroelectronics Digital Consumer
+         Electronics family StiH416 parts, primarily targetted at set-top-box
+         and other digital audio/video applications using Flattened Device
+         Trees.
+
 endmenu
 endif
diff --git a/arch/arm/mach-stih41x/board-dt.c b/arch/arm/mach-stih41x/board-dt.c
index c51e2c9..8005f71 100644
--- a/arch/arm/mach-stih41x/board-dt.c
+++ b/arch/arm/mach-stih41x/board-dt.c
@@ -66,7 +66,7 @@ static const char *stih41x_dt_match[] __initdata = {
        NULL
 };
 
-DT_MACHINE_START(STM, "STiH415 SoC with Flattened Device Tree")
+DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree")
        .map_io         = stih41x_map_io,
        .init_time      = stih41x_timer_init,
        .init_machine   = stih41x_dt_init,
-- 
1.7.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to