Hey Amit, On 07-05-2013 09:01, Amit Daniel Kachhap wrote: > This patch modifies TMU controller to add changes needed to work with > exynos5440 platform. Also register definitions and required configuration data > are added. This sensor registers 3 instance of the tmu controller with the > thermal zone and hence reports 3 temperature output. This controller supports > upto five trip points. For critical threshold the driver uses the core driver > thermal framework for shutdown. >
I would kindly request you to split this patch. Looks like you add
altogether in one patch both data, driver adaptation (for your new soc)
and on top, new features. I would suggest splitting this things in
smaller steps. Easier to review, track, bitsec and find bugs (if any).
> Acked-by: Kukjin Kim <kgene....@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.dan...@samsung.com>
> ---
> .../devicetree/bindings/thermal/exynos-thermal.txt | 28 ++++-
> drivers/thermal/samsung/Kconfig | 4 +-
> drivers/thermal/samsung/exynos_thermal_common.c | 2 +-
> drivers/thermal/samsung/exynos_tmu.c | 139
> +++++++++++++++++---
> drivers/thermal/samsung/exynos_tmu.h | 7 +
> drivers/thermal/samsung/exynos_tmu_data.c | 66 +++++++++-
> drivers/thermal/samsung/exynos_tmu_data.h | 40 ++++++
> 7 files changed, 261 insertions(+), 25 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> index 535fd0e..970eeba 100644
> --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
> @@ -6,13 +6,16 @@
> "samsung,exynos4412-tmu"
> "samsung,exynos4210-tmu"
> "samsung,exynos5250-tmu"
> + "samsung,exynos5440-tmu"
> - interrupt-parent : The phandle for the interrupt controller
> -- reg : Address range of the thermal registers
> +- reg : Address range of the thermal registers. For exynos5440-tmu which has
> 3
> + instances of TMU, 2 set of register has to supplied. First set belongs
> + to each instance of TMU and second set belongs to common TMU registers.
> - interrupts : Should contain interrupt for thermal system
> - clocks : The main clock for TMU device
> - clock-names : Thermal system clock name
>
> -Example:
> +Example 1):
>
> tmu@100C0000 {
> compatible = "samsung,exynos4412-tmu";
> @@ -23,3 +26,24 @@ Example:
> clock-names = "tmu_apbif";
> status = "disabled";
> };
> +
> +Example 2):
> +
> + tmuctrl_0: tmuctrl@160118 {
> + compatible = "samsung,exynos5440-tmu";
> + reg = <0x160118 0x230>, <0x160368 0x10>;
> + interrupts = <0 58 0>;
> + clocks = <&clock 21>;
> + clock-names = "tmu_apbif";
> + };
> +
> +Note: For multi-instance tmu each instance should have an alias correctly
> +numbered in "aliases" node.
> +
> +Example:
> +
> +aliases {
> + tmuctrl0 = &tmuctrl_0;
> + tmuctrl1 = &tmuctrl_1;
> + tmuctrl2 = &tmuctrl_2;
> +};
> diff --git a/drivers/thermal/samsung/Kconfig b/drivers/thermal/samsung/Kconfig
> index f23f533..fce04f3 100644
> --- a/drivers/thermal/samsung/Kconfig
> +++ b/drivers/thermal/samsung/Kconfig
> @@ -19,10 +19,10 @@ config EXYNOS_THERMAL_CORE
>
> config EXYNOS_THERMAL_DATA
> bool "Temperature sensor congiguration data for EXYNOS series SOC"
> - depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 ||
> SOC_EXYNOS5250)
> + depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 ||
> SOC_EXYNOS5250 || SOC_EXYNOS5440)
> depends on EXYNOS_THERMAL
> help
> If you say yes here you can enable TMU (Thermal Management Unit) on
> - SAMSUNG EXYNOS 4210, 4412, 4414 and 5250 series of SoC. This option
> + SAMSUNG EXYNOS 4210, 4412, 4414, 5250 and 5440 series of SoC. This
> option
> enables/prepares the configuration, trip and cooling data for the TMU
> driver.
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c
> b/drivers/thermal/samsung/exynos_thermal_common.c
> index b0dc63e..de43e18 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.c
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -370,7 +370,7 @@ int exynos_register_thermal(struct thermal_sensor_conf
> *sensor_conf)
> th_zone->mode = THERMAL_DEVICE_ENABLED;
> sensor_conf->pzone_data = th_zone;
>
> - pr_info("Exynos: Kernel Thermal management registered\n");
> + pr_info("Exynos: Thermal zone(%s) registered\n", sensor_conf->name);
>
> return 0;
>
> diff --git a/drivers/thermal/samsung/exynos_tmu.c
> b/drivers/thermal/samsung/exynos_tmu.c
> index c1a8c5f..72446c9 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -44,6 +44,7 @@
> * @id: identifier of the one instance of the TMU controller.
> * @pdata: pointer to the tmu platform/configuration data
> * @base: base address of the single instance of the TMU controller.
> + * @base_common: base address of the common registers of the TMU controller.
> * @irq: irq number of the TMU controller.
> * @soc: id of the SOC type.
> * @irq_work: pointer to the irq work structure.
> @@ -57,6 +58,7 @@ struct exynos_tmu_data {
> int id;
> struct exynos_tmu_platform_data *pdata;
> void __iomem *base;
> + void __iomem *base_common;
> int irq;
> enum soc_type soc;
> struct work_struct irq_work;
> @@ -75,6 +77,9 @@ static int temp_to_code(struct exynos_tmu_data *data, u8
> temp)
> struct exynos_tmu_platform_data *pdata = data->pdata;
> int temp_code;
>
> + if (pdata->cal_mode == HW_MODE)
> + return temp;
> +
> if (data->soc == SOC_ARCH_EXYNOS4210)
> /* temp should range between 25 and 125 */
> if (temp < 25 || temp > 125) {
> @@ -109,6 +114,9 @@ static int code_to_temp(struct exynos_tmu_data *data, u8
> temp_code)
> struct exynos_tmu_platform_data *pdata = data->pdata;
> int temp;
>
> + if (pdata->cal_mode == HW_MODE)
> + return temp_code;
> +
> if (data->soc == SOC_ARCH_EXYNOS4210)
> /* temp_code should range between 75 and 175 */
> if (temp_code < 75 || temp_code > 175) {
> @@ -139,33 +147,63 @@ static int exynos_tmu_initialize(struct platform_device
> *pdev)
> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> struct exynos_tmu_platform_data *pdata = data->pdata;
> struct exynos_tmu_registers *reg = pdata->registers;
> - unsigned int status, trim_info, con;
> + unsigned int status, trim_info = 0, con;
> unsigned int rising_threshold = 0, falling_threshold = 0;
> int ret = 0, threshold_code, i, trigger_levs = 0;
>
> mutex_lock(&data->lock);
> clk_enable(data->clk);
>
> - status = readb(data->base + reg->tmu_status);
> - if (!status) {
> - ret = -EBUSY;
> - goto out;
> + if (TMU_SUPPORTS(pdata, READY_STATUS)) {
> + status = readb(data->base + reg->tmu_status);
> + if (!status) {
> + ret = -EBUSY;
> + goto out;
> + }
> }
>
> if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
> __raw_writel(1, data->base + reg->triminfo_ctrl);
>
> + if (pdata->cal_mode == HW_MODE)
> + goto skip_calib_data;
> +
> /* Save trimming info in order to perform calibration */
> - trim_info = readl(data->base + reg->triminfo_data);
> + if (data->soc == SOC_ARCH_EXYNOS5440) {
> + /*
> + * For exynos5440 soc triminfo value is swapped between TMU0 and
> + * TMU2, so the below logic is needed.
> + */
> + switch (data->id) {
> + case 0:
> + trim_info = readl(data->base +
> + EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
> + break;
> + case 1:
> + trim_info = readl(data->base + reg->triminfo_data);
> + break;
> + case 2:
> + trim_info = readl(data->base -
> + EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
> + }
> + } else {
> + trim_info = readl(data->base + reg->triminfo_data);
> + }
> data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
> data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
> EXYNOS_TMU_TEMP_MASK);
>
> - if ((pdata->min_efuse_value > data->temp_error1) ||
> - (data->temp_error1 > pdata->max_efuse_value) ||
> - (data->temp_error2 != 0))
> - data->temp_error1 = pdata->efuse_value;
> + if (!data->temp_error1 ||
> + (pdata->min_efuse_value > data->temp_error1) ||
> + (data->temp_error1 > pdata->max_efuse_value))
> + data->temp_error1 = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
> +
> + if (!data->temp_error2)
> + data->temp_error2 =
> + (pdata->efuse_value >> reg->triminfo_85_shift) &
> + EXYNOS_TMU_TEMP_MASK;
>
> +skip_calib_data:
> /* Count trigger levels to be enabled */
> for (i = 0; i < MAX_THRESHOLD_LEVS; i++)
> if (pdata->trigger_levels[i])
> @@ -185,9 +223,10 @@ static int exynos_tmu_initialize(struct platform_device
> *pdev)
> data->base + reg->threshold_th0 + i * 4);
>
> writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
> - } else if (data->soc == SOC_ARCH_EXYNOS) {
> + } else if (data->soc == SOC_ARCH_EXYNOS ||
> + data->soc == SOC_ARCH_EXYNOS5440) {
> /* Write temperature code for rising and falling threshold */
> - for (i = 0; i < trigger_levs; i++) {
> + for (i = 0; i < trigger_levs && i < 4 ; i++) {
> threshold_code = temp_to_code(data,
> pdata->trigger_levels[i]);
> if (threshold_code < 0) {
> @@ -218,7 +257,29 @@ static int exynos_tmu_initialize(struct platform_device
> *pdev)
> writel((reg->inten_rise_mask << reg->inten_rise_shift) |
> (reg->inten_fall_mask << reg->inten_fall_shift),
> data->base + reg->tmu_intclear);
> +
> + /* if 5th threshold limit is also present, use TH2 register */
> + i = 4;
> + if (pdata->trigger_levels[i]) {
> + threshold_code = temp_to_code(data,
> + pdata->trigger_levels[i]);
> + if (threshold_code < 0) {
> + ret = threshold_code;
> + goto out;
> + }
> + rising_threshold = threshold_code << 24;
> + writel(rising_threshold,
> + data->base + reg->threshold_th2);
> + if (pdata->trigger_type[i] == HW_TRIP) {
> + con = readl(data->base + reg->tmu_ctrl);
> + con |= (1 << reg->therm_trip_en_shift);
> + writel(con, data->base + reg->tmu_ctrl);
> + }
> + }
> }
> + /*Clear the PMIN in the common TMU register*/
> + if (reg->tmu_pmin && !data->id)
> + writel(0, data->base_common + reg->tmu_pmin);
> out:
> clk_disable(data->clk);
> mutex_unlock(&data->lock);
> @@ -254,6 +315,11 @@ static void exynos_tmu_control(struct platform_device
> *pdev, bool on)
> con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
> }
>
> + if (pdata->cal_mode == HW_MODE) {
> + con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
> + con |= pdata->cal_type << reg->calib_mode_shift;
> + }
> +
> if (on) {
> con |= (1 << reg->core_en_shift);
> interrupt_en =
> @@ -317,9 +383,11 @@ static int exynos_tmu_set_emulation(void *drv_data,
> unsigned long temp)
> if (temp) {
> temp /= MCELSIUS;
>
> - val = (EXYNOS_EMUL_TIME << reg->emul_time_shift) |
> - (temp_to_code(data, temp)
> - << reg->emul_temp_shift) | EXYNOS_EMUL_ENABLE;
> + if (data->soc == SOC_ARCH_EXYNOS && reg->emul_time_shift)
> + val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
> +
> + val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
> + EXYNOS_EMUL_ENABLE;
> } else {
> val &= ~EXYNOS_EMUL_ENABLE;
> }
> @@ -343,7 +411,14 @@ static void exynos_tmu_work(struct work_struct *work)
> struct exynos_tmu_data, irq_work);
> struct exynos_tmu_platform_data *pdata = data->pdata;
> struct exynos_tmu_registers *reg = pdata->registers;
> - unsigned int val_irq;
> + unsigned int val_irq, val_type;
> +
> + /* Find which sensor generated this interrupt */
> + if (reg->tmu_irqstatus) {
> + val_type = readl(data->base_common + reg->tmu_irqstatus);
> + if (!((val_type >> data->id) & 0x1))
> + goto out;
> + }
>
> exynos_report_trigger(data->reg_conf);
> mutex_lock(&data->lock);
> @@ -355,7 +430,7 @@ static void exynos_tmu_work(struct work_struct *work)
>
> clk_disable(data->clk);
> mutex_unlock(&data->lock);
> -
> +out:
> enable_irq(data->irq);
> }
>
> @@ -383,6 +458,10 @@ static const struct of_device_id exynos_tmu_match[] = {
> .compatible = "samsung,exynos5250-tmu",
> .data = (void *)EXYNOS5250_TMU_DRV_DATA,
> },
> + {
> + .compatible = "samsung,exynos5440-tmu",
> + .data = (void *)EXYNOS5440_TMU_DRV_DATA,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, exynos_tmu_match);
> @@ -420,6 +499,7 @@ static inline struct exynos_tmu_platform_data
> *exynos_get_driver_data(
> static int exynos_map_dt_data(struct platform_device *pdev)
> {
> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
> + struct exynos_tmu_platform_data *pdata = data->pdata;
> struct resource res;
>
> if (!data)
> @@ -436,7 +516,7 @@ static int exynos_map_dt_data(struct platform_device
> *pdev)
> }
>
> if (of_address_to_resource(pdev->dev.of_node, 0, &res)) {
> - dev_err(&pdev->dev, "failed to get Resource\n");
> + dev_err(&pdev->dev, "failed to get Resource 0\n");
> return -ENODEV;
> }
>
> @@ -445,6 +525,26 @@ static int exynos_map_dt_data(struct platform_device
> *pdev)
> dev_err(&pdev->dev, "Failed to ioremap memory\n");
> return -ENOMEM;
> }
> +
> + /*
> + * Check if the TMU is multi instance type and then try to map the
> + * memory of common registers.
> + */
> + if (!TMU_SUPPORTS(pdata, MULTI_INST))
> + return 0;
> +
> + if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
> + dev_err(&pdev->dev, "failed to get Resource 1\n");
> + return -ENODEV;
> + }
> +
> + data->base_common = devm_ioremap(&pdev->dev, res.start,
> + resource_size(&res));
> + if (!data->base) {
> + dev_err(&pdev->dev, "Failed to ioremap memory\n");
> + return -ENOMEM;
> + }
> +
> return 0;
> }
>
> @@ -496,7 +596,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
> return ret;
>
> if (pdata->type == SOC_ARCH_EXYNOS ||
> - pdata->type == SOC_ARCH_EXYNOS4210)
> + pdata->type == SOC_ARCH_EXYNOS4210 ||
> + pdata->type == SOC_ARCH_EXYNOS5440)
> data->soc = pdata->type;
> else {
> ret = -EINVAL;
> diff --git a/drivers/thermal/samsung/exynos_tmu.h
> b/drivers/thermal/samsung/exynos_tmu.h
> index de1c342..cc6b10e 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -43,6 +43,7 @@ enum trigger_type {
> enum soc_type {
> SOC_ARCH_EXYNOS4210 = 1,
> SOC_ARCH_EXYNOS,
> + SOC_ARCH_EXYNOS5440,
> };
>
> /**
> @@ -61,6 +62,7 @@ enum soc_type {
> #define TMU_SUPPORT_MULTI_INST BIT(1)
> #define TMU_SUPPORT_TRIM_RELOAD BIT(2)
> #define TMU_SUPPORT_FALLING_TRIP BIT(3)
> +#define TMU_SUPPORT_READY_STATUS BIT(4)
>
> #define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b)
>
> @@ -85,6 +87,8 @@ struct exynos_tmu_registers {
> u32 therm_trip_en_shift;
> u32 buf_slope_sel_shift;
> u32 buf_slope_sel_mask;
> + u32 calib_mode_shift;
> + u32 calib_mode_mask;
> u32 therm_trip_tq_en_shift;
> u32 core_en_shift;
>
> @@ -137,6 +141,9 @@ struct exynos_tmu_registers {
> u32 emul_temp_shift;
> u32 emul_time_shift;
> u32 emul_time_mask;
> +
> + u32 tmu_irqstatus;
> + u32 tmu_pmin;
> };
>
> /**
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.c
> b/drivers/thermal/samsung/exynos_tmu_data.c
> index 8a587d4..25629e6 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.c
> +++ b/drivers/thermal/samsung/exynos_tmu_data.c
> @@ -79,6 +79,7 @@ struct exynos_tmu_platform_data const
> exynos4210_default_tmu_data = {
> .freq_tab_count = 2,
> .type = SOC_ARCH_EXYNOS4210,
> .registers = &exynos4210_tmu_registers,
> + .features = (TMU_SUPPORT_READY_STATUS),
> };
> #endif
>
> @@ -155,6 +156,69 @@ struct exynos_tmu_platform_data const
> exynos5250_default_tmu_data = {
> .type = SOC_ARCH_EXYNOS,
> .registers = &exynos5250_tmu_registers,
> .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD |
> - TMU_SUPPORT_FALLING_TRIP),
> + TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS),
> +};
> +#endif
> +
> +#if defined(CONFIG_SOC_EXYNOS5440)
> +static struct exynos_tmu_registers exynos5440_tmu_registers = {
> + .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
> + .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
> + .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
> + .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
> + .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
> + .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
> + .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
> + .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
> + .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
> + .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
> + .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
> + .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
> + .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
> + .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
> + .tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
> + .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
> + .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
> + .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
> + .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
> + .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
> + .inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
> + .inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
> + .inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
> + .inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
> + .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
> + .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
> + .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
> + .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
> + .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
> + .tmu_evten = EXYNOS5440_TMU_S0_7_EVTEN,
> + .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
> + .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
> + .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
> + .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
> + .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
> + .tmu_pmin = EXYNOS5440_TMU_PMIN,
> +};
> +struct exynos_tmu_platform_data const exynos5440_default_tmu_data = {
> + .trigger_levels[0] = 100,
> + .trigger_levels[4] = 105,
> + .trigger_enable[0] = 1,
> + .trigger_type[0] = 1,
> + .trigger_type[4] = 2,
> + .gain = 5,
> + .reference_voltage = 16,
> + .noise_cancel_mode = 4,
> + .cal_type = TYPE_TWO_POINT_TRIMMING,
> + .cal_mode = 0,
> + .efuse_value = 0x5b2d,
> + .min_efuse_value = 16,
> + .max_efuse_value = 76,
> + .first_point_trim = 25,
> + .second_point_trim = 70,
> + .default_temp_offset = 25,
> + .type = SOC_ARCH_EXYNOS5440,
> + .registers = &exynos5440_tmu_registers,
> + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP |
> + TMU_SUPPORT_MULTI_INST),
> };
> #endif
> diff --git a/drivers/thermal/samsung/exynos_tmu_data.h
> b/drivers/thermal/samsung/exynos_tmu_data.h
> index 0560413..c409f3a 100644
> --- a/drivers/thermal/samsung/exynos_tmu_data.h
> +++ b/drivers/thermal/samsung/exynos_tmu_data.h
> @@ -75,6 +75,8 @@
> #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
> #define EXYNOS_TMU_TRIP_MODE_MASK 0x7
> #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
> +#define EXYNOS_TMU_CALIB_MODE_SHIFT 4
> +#define EXYNOS_TMU_CALIB_MODE_MASK 0x3
>
> #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
> #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
> @@ -91,6 +93,37 @@
> #define EXYNOS_EMUL_DATA_MASK 0xFF
> #define EXYNOS_EMUL_ENABLE 0x1
>
> +/*exynos5440 specific registers*/
> +#define EXYNOS5440_TMU_S0_7_TRIM 0x000
> +#define EXYNOS5440_TMU_S0_7_CTRL 0x020
> +#define EXYNOS5440_TMU_S0_7_DEBUG 0x040
> +#define EXYNOS5440_TMU_S0_7_STATUS 0x060
> +#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
> +#define EXYNOS5440_TMU_S0_7_TH0 0x110
> +#define EXYNOS5440_TMU_S0_7_TH1 0x130
> +#define EXYNOS5440_TMU_S0_7_TH2 0x150
> +#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
> +#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
> +#define EXYNOS5440_TMU_S0_7_IRQ 0x230
> +/* exynos5440 common registers */
> +#define EXYNOS5440_TMU_IRQ_STATUS 0x000
> +#define EXYNOS5440_TMU_PMIN 0x004
> +#define EXYNOS5440_TMU_TEMP 0x008
> +
> +#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
> +#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
> +#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
> +#define EXYNOS5440_TMU_FALL_INT_MASK 0xf
> +#define EXYNOS5440_TMU_FALL_INT_SHIFT 4
> +#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
> +#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
> +#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
> +#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
> +#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
> +#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
> +#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
> +#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
> +
> #if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_EXYNOS_THERMAL_DATA)
> extern struct exynos_tmu_platform_data const exynos4210_default_tmu_data;
> #define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
> @@ -106,4 +139,11 @@ extern struct exynos_tmu_platform_data const
> exynos5250_default_tmu_data;
> #define EXYNOS5250_TMU_DRV_DATA (NULL)
> #endif
>
> +#if defined(CONFIG_SOC_EXYNOS5440) && defined(CONFIG_EXYNOS_THERMAL_DATA)
> +extern struct exynos_tmu_platform_data const exynos5440_default_tmu_data;
> +#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
> +#else
> +#define EXYNOS5440_TMU_DRV_DATA (NULL)
> +#endif
> +
> #endif /*_LINUX_EXYNOS_TMU_DATA_H*/
>
signature.asc
Description: OpenPGP digital signature
