On 14/05/2013, at 6:03 PM, Linus Walleij <linus.wall...@linaro.org> wrote:
>> + >> + timer->interrupt_regs = of_iomap(node, 1); > > Check for errors. > >> + timer->irqnr = irq_of_parse_and_map(node, 0); > > Check for errors. >> + if (timer->interrupt_regs && timer->irqnr) { >> The idea with this is to make these properties optional. Each timer has two sub-timers but only one can generate interrupts. One will be added as a clockevent device and the other as a clocksource. If an IRQ number or interrupt acknowledge address is not passed through the DT, then the clockevents device is not added but the clocksource still is. Should I comment it in the code to make it apparent what's happening or is there a better way to express this? > >> + writel(0x3F, timer->interrupt_regs + IO_INTR_ACK); > > Hm magic number, I guess it's clearing all IRQ lines… It's a bitmask of bits 0-5. > >> + >> + /* Interrupt to occur when timer value matches 0 */ >> + writel(0, timer->base + IO_MATCH1); >> + >> + timer->clkevt_irq.name = timer->clockevent_name; >> + timer->clkevt_irq.handler = nspire_timer_interrupt; >> + timer->clkevt_irq.dev_id = timer; >> + timer->clkevt_irq.flags = >> + IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL; >> + >> + setup_irq(timer->irqnr, &timer->clkevt_irq); >> + >> + clockevents_config_and_register(&timer->clkevt, >> + clk_get_rate(timer->clk), 0x0001, 0xfffe); >> + pr_info("Added %s as clockevent\n", timer->clockevent_name); >> + } >> + >> + writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC, >> + timer->timer2 + IO_CONTROL); >> + >> + clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL, >> + timer->clocksource_name, >> + clk_get_rate(timer->clk), >> + 200, 16, >> + clocksource_mmio_readw_up); > > If this timer is really just 16 bits, it's a *pretty* good idea to use > the prescaler (I guess this is what IO_DIVIDER is) beacuse else you > will get short sleep times with CONFIG_NO_HZ_IDLE on this system, > and wake up unnecessarily often. > > The same goes for the clock event. The clock frequency is 32768Hz. Should I be scaling it down at that frequency? > > See how we calculate the prescaler in arch/arm/mach-integrator/integrator_ap.c > for example. > > Yours, > Linus Walleij Cheers, Daniel Tang-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/