Hi all, I had a double oops on a sever. The machine didn't want to start anything after that, so I had to reboot (no ctrl-ald-del because shutdown didn't start, only a hard reboot worked :-( It did damage my fs (ext2) but a manual fsck seems to have revovered it. The machine had a 150 days uptime, and is rock solid since then (3 days) I have good technical background, but I'm not a developper by any means, and I don't understand anything in the output of ksymoops. But if you need some other info, I'm willing to help so don't hesitate to ask (I can run other diagnosing tools, but I will not accept to try to reproduce the oops though, it's our main production server here) Here it comes : <----- dmesg -----> hal:/home/hobbes# dmesg Linux version 2.2.17 (root@hal) (gcc version 2.7.2.3) #1 Mon Nov 20 18:33:32 CET 2000 Detected 737031 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1471.28 BogoMIPS Memory: 256816k/262016k available (1564k kernel code, 416k reserved, 3076k data, 144k init) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium III (Coppermine) stepping 03 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS revision 2.10 entry at 0xf0d90 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Starting kswapd v 1.5 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=244b PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio hda: ASUS CD-S500/A, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 50X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sim710: No NCR53C710 adapter found. scsi: <fdomain> Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0 sym53c8xx: at PCI bus 2, device 11, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c860 detected with Symbios NVRAM sym53c860-0: rev=0x02, base=0xeb800000, io_port=0xd800, irq=9 sym53c860-0: NCR clock is 80074KHz, 80074KHz sym53c860-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking sym53c860-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym53c860-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/ce/a0/00/08/00 sym53c860-0: resetting, command processing suspended for 2 seconds sym53c860-0: restart (scsi reset). ncr53c8xx: at PCI bus 2, device 11, function 0 ncr53c8xx: IO region 0xd800 to 0xd87f is in use sym53c860-0: command processing resumed Adaptec: Reading the hardware resource table. This could take up to 5 minutes Adaptec: Hardware resource table read. Failed initialization of WD-7000 SCSI card! megaraid: v107 (December 22, 1999) aec671x_detect: 3w-xxxx: tw_findcards(): No cards found. scsi0 : sym53c8xx - version 1.3g scsi1 : Vendor: Adaptec Model: 2100S Rev: 320H scsi : 2 hosts. Vendor: HP Model: HP35480A Rev: M902 Type: Sequential-Access ANSI SCSI revision: 02 Vendor: ADAPTEC Model: MAIN Rev: 320H Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi1, channel 0, id 0, lun 0 scsi : detected 1 SCSI disk total. SCSI device sda: hdwr sector= 512 bytes. Sectors= 71716864 [35018 MB] [35.0 GB] Partition check: sda: sda1 sda2 sda3 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 144k freed NET4: Unix domain sockets 1.0 for Linux NET4.0. Adding Swap: 248996k swap-space (priority -1) 3c59x.c:v0.99H 12Jun00 Donald Becker and others http://www.scyld.com/network/vor tex.html eth0: 3Com 3c905C Tornado at 0xd400, 00:01:02:db:e4:9c, IRQ 9 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A NET4: AppleTalk 0.18 for Linux NET4.0 st: bufsize 32768, wrt 30720, max buffers 5, s/g segs 16. Detected scsi tape st0 at scsi0, channel 0, id 3, lun 0 sym53c860-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) VFS: Disk change detected on device ide0(3,0) ISO 9660 Extensions: Microsoft Joliet Level 1 ISOFS: changing to secondary root hal:/home/hobbes# <----- end of dmesg -----> <----- syslog -----> hal:/home/hobbes# cat logoops May 3 09:26:42 hal kernel: swap_free: Trying to free nonexistent swap-page May 3 09:26:42 hal kernel: swap_free: Trying to free nonexistent swap-page May 3 09:26:48 hal kernel: Oops: 0000 May 3 09:26:48 hal kernel: CPU: 0 May 3 09:26:48 hal kernel: EIP: 0010:[<d20e51f5>] May 3 09:26:48 hal kernel: EFLAGS: 00210002 May 3 09:26:48 hal kernel: eax: 0a32424d ebx: c02fa9f4 ecx: c02f0700 edx: cf9d2f20 May 3 09:26:48 hal kernel: esi: 00000080 edi: c030c728 ebp: 00000004 esp: c2a2ddc0 May 3 09:26:48 hal kernel: ds: 0018 es: 0018 ss: 0018 May 3 09:26:48 hal kernel: Process smbd (pid: 18037, process nr: 46, stackpage= c2a2d000) May 3 09:26:48 hal kernel: Stack: c030c728 00000004 00000021 00000001 00000001 c4c15150 c2a2de34 00000001 May 3 09:26:48 hal kernel: 00000001 00000001 0a32424d 00788e05 00001000 00788e05 00000803 000002b2 May 3 09:26:48 hal kernel: c01679eb c017f006 c02f9c2c 00000007 cf9d2f20 00000004 00788e05 00001000 May 3 09:26:48 hal kernel: Call Trace: [ip_output+111/168] [add_request+1282/12 96] [getblk+31/332] [getblk+31/332] [get_unused_buffer_head+27/164] [make_reques t+2307/2344] [ll_rw_block+315/424] May 3 09:26:48 hal kernel: [bread+60/112] [isofs_find_entry+158/1268] [e xt2_readdir+1139/1152] [isofs_lookup+38/120] [real_lookup+79/164] [lookup_dentry +268/428] [__namei+41/92] [sys_newstat+19/100] May 3 09:26:48 hal kernel: [system_call+52/56] [startup_32+43/285] May 3 09:26:48 hal kernel: Code: 8b 48 30 89 0d 34 c7 30 c0 66 0f b6 50 04 66 8 3 fa 07 0f 87 May 3 09:26:48 hal kernel: free_one_pmd: bad directory entry 00000004 May 3 09:27:41 hal kernel: swap_free: Trying to free nonexistent swap-page May 3 09:31:16 hal kernel: swap_free: Trying to free nonexistent swap-page May 3 09:31:56 hal kernel: Oops: 0000 May 3 09:31:56 hal kernel: CPU: 0 May 3 09:31:56 hal kernel: EIP: 0010:[locks_remove_flock+14/144] May 3 09:31:56 hal kernel: EFLAGS: 00210282 May 3 09:31:56 hal kernel: eax: 00000001 ebx: c357f5c8 ecx: cdc75c40 edx: c357f5c8 May 3 09:31:56 hal kernel: esi: 40186000 edi: cdc75c40 ebp: 00008000 esp: cb6a1e78 May 3 09:31:56 hal kernel: ds: 0018 es: 0018 ss: 0018 May 3 09:31:56 hal kernel: Process smbd (pid: 18027, process nr: 10, stackpage= cb6a1000) May 3 09:31:56 hal kernel: Stack: cdc75c40 00008000 c041bd00 c01233fb 00000000 ce4ce638 c011b1dc c6120000 May 3 09:31:56 hal kernel: cf85e5c0 40186000 cdc75c40 00008000 c6120000 00000001 0018e000 cecb8404 May 3 09:31:56 hal kernel: 00000001 4018e000 c0126c75 c357f5c8 cf85e5c0 c011ce62 c357f5c8 cdc75c40 May 3 09:31:56 hal kernel: Call Trace: [free_page_and_swap_cache+95/100] [zap_p age_range+324/452] [fput+17/72] [exit_mmap+190/268] [mmput+30/56] [do_exit+215/6 40] [do_signal+664/752] May 3 09:31:56 hal kernel: [startup_32+0/285] [force_sig_info+130/140] [ do_invalid_op+53/60] [error_table+2144/7104] [error_code+45/52] [signal_return+2 0/24] May 3 09:31:56 hal kernel: Code: 8b 40 08 89 44 24 10 8b 6c 24 10 83 c5 70 8b 5 4 24 10 8b 72 <----- end of syslog -----> <----- ksymoops -----> hal:/home/hobbes# ksymoops logoops ksymoops 2.3.4 on i686 2.2.17. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.2.17/ (default) -m /boot/System.map-2.2.17 (default) Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options. May 3 09:26:48 hal kernel: Oops: 0000 May 3 09:26:48 hal kernel: CPU: 0 May 3 09:26:48 hal kernel: EIP: 0010:[<d20e51f5>] Using defaults from ksymoops -t elf32-i386 -a i386 May 3 09:26:48 hal kernel: EFLAGS: 00210002 May 3 09:26:48 hal kernel: eax: 0a32424d ebx: c02fa9f4 ecx: c02f0700 edx: cf9d2f20 May 3 09:26:48 hal kernel: esi: 00000080 edi: c030c728 ebp: 00000004 esp: c2a2ddc0 May 3 09:26:48 hal kernel: ds: 0018 es: 0018 ss: 0018 May 3 09:26:48 hal kernel: Process smbd (pid: 18037, process nr: 46, stackpage= c2a2d000) May 3 09:26:48 hal kernel: Stack: c030c728 00000004 00000021 00000001 00000001 c4c15150 c2a2de34 00000001 May 3 09:26:48 hal kernel: 00000001 00000001 0a32424d 00788e05 00001000 00788e05 00000803 000002b2 May 3 09:26:48 hal kernel: c01679eb c017f006 c02f9c2c 00000007 cf9d2f20 00000004 00788e05 00001000 May 3 09:26:48 hal kernel: Call Trace: [ip_output+111/168] [add_request+1282/12 96] [getblk+31/332] [getblk+31/332] [get_unused_buffer_head+27/164] [make_reques t+2307/2344] [ll_rw_block+315/424] May 3 09:26:48 hal kernel: Code: 8b 48 30 89 0d 34 c7 30 c0 66 0f b6 50 04 66 8 3 fa 07 0f 87 >>EIP; d20e51f5 <END_OF_CODE+123be/????> <===== Code; d20e51f5 <END_OF_CODE+123be/????> 00000000 <_EIP>: Code; d20e51f5 <END_OF_CODE+123be/????> <===== 0: 8b 48 30 mov 0x30(%eax),%ecx <===== Code; d20e51f8 <END_OF_CODE+123c1/????> 3: 89 0d 34 c7 30 c0 mov %ecx,0xc030c734 Code; d20e51fe <END_OF_CODE+123c7/????> 9: 66 0f b6 50 04 movzbw 0x4(%eax),%dx Code; d20e5203 <END_OF_CODE+123cc/????> e: 66 83 fa 07 cmp $0x7,%dx Code; d20e5207 <END_OF_CODE+123d0/????> 12: 0f 87 00 00 00 00 ja 18 <_EIP+0x18> d20e520d <END_OF_CODE+12 3d6/????> May 3 09:31:56 hal kernel: Oops: 0000 May 3 09:31:56 hal kernel: CPU: 0 May 3 09:31:56 hal kernel: EIP: 0010:[locks_remove_flock+14/144] May 3 09:31:56 hal kernel: EFLAGS: 00210282 May 3 09:31:56 hal kernel: eax: 00000001 ebx: c357f5c8 ecx: cdc75c40 edx: c357f5c8 May 3 09:31:56 hal kernel: esi: 40186000 edi: cdc75c40 ebp: 00008000 esp: cb6a1e78 May 3 09:31:56 hal kernel: ds: 0018 es: 0018 ss: 0018 May 3 09:31:56 hal kernel: Process smbd (pid: 18027, process nr: 10, stackpage= cb6a1000) May 3 09:31:56 hal kernel: Stack: cdc75c40 00008000 c041bd00 c01233fb 00000000 ce4ce638 c011b1dc c6120000 May 3 09:31:56 hal kernel: cf85e5c0 40186000 cdc75c40 00008000 c6120000 00000001 0018e000 cecb8404 May 3 09:31:56 hal kernel: 00000001 4018e000 c0126c75 c357f5c8 cf85e5c0 c011ce62 c357f5c8 cdc75c40 May 3 09:31:56 hal kernel: Call Trace: [free_page_and_swap_cache+95/100] [zap_p age_range+324/452] [fput+17/72] [exit_mmap+190/268] [mmput+30/56] [do_exit+215/6 40] [do_signal+664/752] May 3 09:31:56 hal kernel: Code: 8b 40 08 89 44 24 10 8b 6c 24 10 83 c5 70 8b 5 4 24 10 8b 72 Code; d20e51f5 <END_OF_CODE+123be/????> 00000000 <_EIP>: Code; d20e51f5 <END_OF_CODE+123be/????> 0: 8b 40 08 mov 0x8(%eax),%eax Code; d20e51f8 <END_OF_CODE+123c1/????> 3: 89 44 24 10 mov %eax,0x10(%esp,1) Code; d20e51fc <END_OF_CODE+123c5/????> 7: 8b 6c 24 10 mov 0x10(%esp,1),%ebp Code; d20e5200 <END_OF_CODE+123c9/????> b: 83 c5 70 add $0x70,%ebp Code; d20e5203 <END_OF_CODE+123cc/????> e: 8b 54 24 10 mov 0x10(%esp,1),%edx Code; d20e5207 <END_OF_CODE+123d0/????> 12: 8b 72 00 mov 0x0(%edx),%esi 1 warning issued. Results may not be reliable. hal:/home/hobbes# <----- end of ksymoops -----> My kernel configuration is attached. Tell me if you need some more info. -- Rémi ___________________________________________________________ Do You Yahoo!? -- Pour faire vos courses sur le Net, Yahoo! Shopping : http://fr.shopping.yahoo.com
# # Automatically generated make config: don't edit # # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set CONFIG_M686=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_SMP is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_OPTIMIZE is not set CONFIG_PCI_OLD_PROC=y # CONFIG_MCA is not set # CONFIG_VISWS is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # CONFIG_BINFMT_JAVA is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_OTHER is not set CONFIG_APM=y CONFIG_APM_DISABLE_BY_DEFAULT=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_IGNORE_SUSPEND_BOUNCE is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_PARPORT=m # # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=m CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_VIA82C586 is not set # CONFIG_BLK_DEV_CMD646 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_IDE_CHIPSETS is not set # # Additional Block Devices # CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_BLK_DEV_XD=m CONFIG_BLK_DEV_DAC960=m CONFIG_PARIDE_PARPORT=m CONFIG_PARIDE=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_CPQ_DA=m # CONFIG_BLK_DEV_HD is not set # # Networking options # CONFIG_PACKET=m CONFIG_NETLINK=y # CONFIG_RTNETLINK is not set CONFIG_NETLINK_DEV=m CONFIG_FIREWALL=y CONFIG_FILTER=y CONFIG_UNIX=m CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set CONFIG_IP_FIREWALL=y # CONFIG_IP_FIREWALL_NETLINK is not set # CONFIG_IP_TRANSPARENT_PROXY is not set CONFIG_IP_MASQUERADE=y # # Protocol-specific masquerading support will be built as modules. # CONFIG_IP_MASQUERADE_ICMP=y # # Protocol-specific masquerading support will be built as modules. # CONFIG_IP_MASQUERADE_MOD=y CONFIG_IP_MASQUERADE_IPAUTOFW=m CONFIG_IP_MASQUERADE_IPPORTFW=m CONFIG_IP_MASQUERADE_MFW=m # CONFIG_IP_ROUTER is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_NET_IPGRE_BROADCAST is not set # CONFIG_IP_MROUTE is not set CONFIG_IP_ALIAS=y CONFIG_SYN_COOKIES=y # # (it is safe to leave these untouched) # CONFIG_INET_RARP=m # CONFIG_SKB_LARGE is not set CONFIG_IPV6=m # CONFIG_IPV6_EUI64 is not set # CONFIG_IPV6_NETLINK is not set # # # CONFIG_IPX=m # CONFIG_IPX_INTERN is not set CONFIG_SPX=m CONFIG_ATALK=m CONFIG_X25=m CONFIG_LAPB=m # CONFIG_BRIDGE is not set # CONFIG_LLC is not set CONFIG_ECONET=m # CONFIG_ECONET_AUNUDP is not set # CONFIG_ECONET_NATIVE is not set CONFIG_WAN_ROUTER=m # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # CONFIG_CPU_IS_SLOW is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Telephony Support # CONFIG_PHONE=m CONFIG_PHONE_IXJ=m # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # CONFIG_BLK_DEV_3W_XXXX_RAID=y CONFIG_SCSI_7000FASST=y CONFIG_SCSI_ACARD=y CONFIG_SCSI_AHA152X=y CONFIG_SCSI_AHA1542=y CONFIG_SCSI_AHA1740=y CONFIG_SCSI_AIC7XXX=y # CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_PROC_STATS=y CONFIG_AIC7XXX_RESET_DELAY=15 CONFIG_SCSI_IPS=y CONFIG_SCSI_ADVANSYS=y CONFIG_SCSI_IN2000=y CONFIG_SCSI_AM53C974=y CONFIG_SCSI_MEGARAID=y CONFIG_SCSI_BUSLOGIC=y # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_DTC3280=y CONFIG_SCSI_DPT_I2O=y CONFIG_SCSI_EATA=y # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 # CONFIG_SCSI_EATA_DMA is not set CONFIG_SCSI_EATA_PIO=y CONFIG_SCSI_FUTURE_DOMAIN=y CONFIG_SCSI_GDTH=y CONFIG_SCSI_GENERIC_NCR5380=y # CONFIG_SCSI_GENERIC_NCR53C400 is not set CONFIG_SCSI_G_NCR5380_PORT=y # CONFIG_SCSI_G_NCR5380_MEM is not set CONFIG_SCSI_INITIO=y CONFIG_SCSI_INIA100=y CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_NCR53C406A=y CONFIG_SCSI_SYM53C416=y CONFIG_SCSI_SIM710=y # CONFIG_SCSI_NCR53C7xx is not set CONFIG_SCSI_NCR53C8XX=y CONFIG_SCSI_SYM53C8XX=y CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=4 CONFIG_SCSI_NCR53C8XX_SYNC=5 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set CONFIG_SCSI_NCR53C8XX_PQS_PDS=y # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set CONFIG_SCSI_PAS16=y # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set CONFIG_SCSI_PSI240I=m CONFIG_SCSI_QLOGIC_FAS=y CONFIG_SCSI_QLOGIC_ISP=y CONFIG_SCSI_QLOGIC_FC=y CONFIG_SCSI_SEAGATE=y CONFIG_SCSI_DC390T=m # CONFIG_SCSI_DC390T_NOGENSUPP is not set CONFIG_SCSI_T128=y CONFIG_SCSI_U14_34F=y # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=y CONFIG_SCSI_DEBUG=m # # I2O device support # CONFIG_I2O=m CONFIG_I2O_PCI=m CONFIG_I2O_BLOCK=m CONFIG_I2O_SCSI=m # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # CONFIG_ARCNET=m CONFIG_ARCNET_ETH=y CONFIG_ARCNET_1051=y CONFIG_ARCNET_COM90xx=m CONFIG_ARCNET_COM90xxIO=m CONFIG_ARCNET_RIM_I=m CONFIG_ARCNET_COM20020=m CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_EQUALIZER=m CONFIG_ETHERTAP=m CONFIG_NET_SB1000=m # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=m CONFIG_EL2=m CONFIG_ELPLUS=m CONFIG_EL16=m CONFIG_EL3=m CONFIG_3C515=m CONFIG_VORTEX=m CONFIG_LANCE=m CONFIG_NET_VENDOR_SMC=y CONFIG_WD80x3=m CONFIG_ULTRA=m CONFIG_ULTRA32=m CONFIG_SMC9194=m CONFIG_NET_VENDOR_RACAL=y CONFIG_NI5010=m CONFIG_NI52=m CONFIG_NI65=m CONFIG_RTL8139=m CONFIG_NET_ISA=y CONFIG_AT1700=m CONFIG_E2100=m CONFIG_DEPCA=m CONFIG_EWRK3=m CONFIG_EEXPRESS=m CONFIG_EEXPRESS_PRO=m CONFIG_FMV18X=m CONFIG_HPLAN_PLUS=m CONFIG_HPLAN=m CONFIG_HP100=m CONFIG_ETH16I=m CONFIG_NE2000=m # CONFIG_SEEQ8005 is not set # CONFIG_SK_G16 is not set CONFIG_NET_EISA=y CONFIG_PCNET32=m CONFIG_AC3200=m CONFIG_APRICOT=m CONFIG_CS89x0=m CONFIG_DM9102=m CONFIG_DE4X5=m CONFIG_DEC_ELCP=m CONFIG_DEC_ELCP_OLD=m CONFIG_DGRS=m CONFIG_EEXPRESS_PRO100=m CONFIG_LNE390=m CONFIG_NE3210=m CONFIG_NE2K_PCI=m CONFIG_TLAN=m CONFIG_VIA_RHINE=m CONFIG_SIS900=m CONFIG_ES3210=m CONFIG_EPIC100=m # CONFIG_ZNET is not set CONFIG_NET_POCKET=y # CONFIG_ATP is not set CONFIG_DE600=m CONFIG_DE620=m # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m CONFIG_SK98LIN=m # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # # Appletalk devices # CONFIG_LTPC=m CONFIG_COPS=m # CONFIG_COPS_DAYNA is not set # CONFIG_COPS_TANGENT is not set CONFIG_IPDDP=m # CONFIG_IPDDP_ENCAP is not set # CONFIG_IPDDP_DECAP is not set CONFIG_PLIP=m CONFIG_PPP=m # # CCP compressors for PPP are only built as modules. # CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set CONFIG_NET_RADIO=y CONFIG_STRIP=m CONFIG_WAVELAN=m CONFIG_ARLAN=m # # Token ring devices # CONFIG_TR=y CONFIG_IBMTR=m CONFIG_IBMLS=m CONFIG_IBMOL=m CONFIG_SKTR=m CONFIG_NET_FC=y CONFIG_IPHASE5526=m CONFIG_RCPCI=m CONFIG_SHAPER=m # # Wan interfaces # CONFIG_HOSTESS_SV11=m CONFIG_COSA=m CONFIG_SEALEVEL_4021=m CONFIG_SYNCLINK_SYNCPPP=m CONFIG_LANMEDIA=m CONFIG_COMX=m CONFIG_COMX_HW_COMX=m CONFIG_COMX_HW_LOCOMX=m CONFIG_COMX_HW_MIXCOM=m CONFIG_COMX_PROTO_PPP=m CONFIG_COMX_PROTO_LAPB=m CONFIG_COMX_PROTO_FR=m CONFIG_HDLC=m CONFIG_N2=m CONFIG_C101=m CONFIG_WANXL=m CONFIG_PC300=m # CONFIG_PC300_X25 is not set CONFIG_DLCI=m CONFIG_DLCI_COUNT=24 CONFIG_DLCI_MAX=8 CONFIG_SDLA=m CONFIG_WAN_DRIVERS=y CONFIG_VENDOR_SANGOMA=m CONFIG_WANPIPE_CARDS=1 # CONFIG_WANPIPE_FR is not set # CONFIG_WANPIPE_PPP is not set # CONFIG_WANPIPE_CHDLC is not set # CONFIG_LAPBETHER is not set CONFIG_X25_ASY=m CONFIG_SBNI=m # # Amateur Radio support # CONFIG_HAMRADIO=y # # Packet Radio protocols # CONFIG_AX25=m # CONFIG_AX25_DAMA_SLAVE is not set CONFIG_NETROM=m CONFIG_ROSE=m # # AX.25 network device drivers # CONFIG_MKISS=m CONFIG_6PACK=m CONFIG_BPQETHER=m CONFIG_DMASCC=m CONFIG_SCC=m # CONFIG_SCC_DELAY is not set # CONFIG_SCC_TRXECHO is not set CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_BAYCOM_EPP=m CONFIG_SOUNDMODEM=m # CONFIG_SOUNDMODEM_SBC is not set # CONFIG_SOUNDMODEM_WSS is not set # CONFIG_SOUNDMODEM_AFSK1200 is not set # CONFIG_SOUNDMODEM_AFSK2400_7 is not set # CONFIG_SOUNDMODEM_AFSK2400_8 is not set # CONFIG_SOUNDMODEM_AFSK2666 is not set # CONFIG_SOUNDMODEM_HAPN4800 is not set # CONFIG_SOUNDMODEM_PSK4800 is not set # CONFIG_SOUNDMODEM_FSK9600 is not set CONFIG_YAM=m # # Misc. hamradio protocols # CONFIG_HFMODEM=m # CONFIG_HFMODEM_SBC is not set # CONFIG_HFMODEM_WSS is not set # # IrDA (infrared) support # CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRCOMM=m CONFIG_IRDA_ULTRA=y # CONFIG_IRDA_OPTIONS is not set # CONFIG_IRDA_COMPRESSION is not set # # Infrared-port device drivers # # # SIR device drivers # CONFIG_IRTTY_SIR=m CONFIG_IRPORT_SIR=m # # FIR device drivers # CONFIG_NSC_FIR=m CONFIG_WINBOND_FIR=m CONFIG_TOSHIBA_FIR=m CONFIG_SMC_IRCC_FIR=m # # Dongle support # # CONFIG_DONGLE is not set # # ISDN subsystem # CONFIG_ISDN=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y # CONFIG_ISDN_X25 is not set # # ISDN feature submodules # CONFIG_ISDN_DRV_LOOP=m CONFIG_ISDN_DIVERSION=y # # low-level hardware drivers # # # Passive ISDN cards # CONFIG_ISDN_DRV_HISAX=m # # D-channel protocol features # CONFIG_HISAX_EURO=y # CONFIG_DE_AOC is not set # CONFIG_HISAX_NO_SENDCOMPLETE is not set # CONFIG_HISAX_NO_LLC is not set # CONFIG_HISAX_NO_KEYPAD is not set # CONFIG_HISAX_1TR6 is not set # # HiSax supported cards # CONFIG_HISAX_16_0=y CONFIG_HISAX_16_3=y CONFIG_HISAX_TELESPCI=y CONFIG_HISAX_S0BOX=y CONFIG_HISAX_AVM_A1=y CONFIG_HISAX_FRITZPCI=y CONFIG_HISAX_AVM_A1_PCMCIA=y CONFIG_HISAX_ELSA=y CONFIG_HISAX_IX1MICROR2=y CONFIG_HISAX_DIEHLDIVA=y CONFIG_HISAX_ASUSCOM=y CONFIG_HISAX_TELEINT=y CONFIG_HISAX_HFCS=y CONFIG_HISAX_SEDLBAUER=y CONFIG_HISAX_SPORTSTER=y CONFIG_HISAX_MIC=y CONFIG_HISAX_NETJET=y CONFIG_HISAX_NICCY=y CONFIG_HISAX_ISURF=y CONFIG_HISAX_HSTSAPHIR=y CONFIG_HISAX_BKM_A4T=y CONFIG_HISAX_SCT_QUADRO=y CONFIG_HISAX_GAZEL=y CONFIG_HISAX_HFC_PCI=y CONFIG_HISAX_W6692=y CONFIG_HISAX_HFC_SX=y # # Active ISDN cards # CONFIG_ISDN_DRV_ICN=m CONFIG_ISDN_DRV_PCBIT=m # CONFIG_ISDN_DRV_SC is not set CONFIG_ISDN_DRV_ACT2000=m CONFIG_ISDN_DRV_EICON=m CONFIG_ISDN_DRV_EICON_ISA=y CONFIG_ISDN_DRV_AVMB1=m CONFIG_ISDN_DRV_AVMB1_B1ISA=y CONFIG_ISDN_DRV_AVMB1_B1PCI=y CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_T1ISA=y CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y CONFIG_ISDN_DRV_AVMB1_T1PCI=y CONFIG_ISDN_DRV_AVMB1_C4=y CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y # # Old CD-ROM drivers (not SCSI, not IDE) # CONFIG_CD_NO_IDESCSI=y CONFIG_AZTCD=m CONFIG_GSCD=m CONFIG_SBPCD=m CONFIG_MCD=m CONFIG_MCD_IRQ=11 CONFIG_MCD_BASE=300 CONFIG_MCDX=m CONFIG_OPTCD=m CONFIG_CM206=m CONFIG_SJCD=m CONFIG_ISP16_CDI=m CONFIG_CDU31A=m CONFIG_CDU535=m # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=m # CONFIG_SERIAL_EXTENDED is not set CONFIG_SERIAL_NONSTANDARD=y CONFIG_COMPUTONE=m CONFIG_ROCKETPORT=m CONFIG_CYCLADES=m # CONFIG_CYZ_INTR is not set CONFIG_DIGIEPCA=m CONFIG_ESPSERIAL=m CONFIG_MOXA_INTELLIO=m CONFIG_MOXA_SMARTIO=m CONFIG_ISI=m CONFIG_RISCOM8=m CONFIG_SPECIALIX=m # CONFIG_SPECIALIX_RTSCTS is not set CONFIG_SX=m CONFIG_RIO=m # CONFIG_RIO_OLDPCI is not set CONFIG_STALDRV=y CONFIG_STALLION=m CONFIG_ISTALLION=m CONFIG_SYNCLINK=m CONFIG_N_HDLC=m CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_PRINTER_READBACK is not set CONFIG_MOUSE=y # # Mice # CONFIG_ATIXL_BUSMOUSE=m CONFIG_BUSMOUSE=m CONFIG_MS_BUSMOUSE=m CONFIG_PSMOUSE=y CONFIG_82C710_MOUSE=m CONFIG_PC110_PAD=m # # Joysticks # CONFIG_JOYSTICK=m CONFIG_JOY_ANALOG=m CONFIG_JOY_ASSASSIN=m CONFIG_JOY_GRAVIS=m CONFIG_JOY_LOGITECH=m CONFIG_JOY_SIDEWINDER=m CONFIG_JOY_THRUSTMASTER=m CONFIG_JOY_CREATIVE=m CONFIG_JOY_LIGHTNING=m CONFIG_JOY_PCI=m CONFIG_JOY_MAGELLAN=m CONFIG_JOY_SPACEORB=m CONFIG_JOY_SPACEBALL=m CONFIG_JOY_WARRIOR=m CONFIG_JOY_CONSOLE=m CONFIG_JOY_DB9=m CONFIG_JOY_TURBOGRAFX=m CONFIG_QIC02_TAPE=m CONFIG_QIC02_DYNCONF=y # # Setting runtime QIC-02 configuration is done with qic02conf # # # from the tpqic02-support package. It is available at # # # metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/ # CONFIG_WATCHDOG=y # # Watchdog Cards # # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_WDT=m CONFIG_WDT_501=y # CONFIG_WDT_501_FAN is not set CONFIG_SOFT_WATCHDOG=m CONFIG_PCWATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_60XX_WDT=m CONFIG_MIXCOMWD=m CONFIG_NVRAM=m CONFIG_RTC=y # # Video For Linux # # CONFIG_VIDEO_DEV is not set CONFIG_DTLK=m # # Ftape, the floppy tape device driver # CONFIG_FTAPE=m CONFIG_ZFTAPE=m CONFIG_ZFT_DFLT_BLK_SZ=10240 # # The compressor will be built as a module only! # CONFIG_ZFT_COMPRESSOR=m CONFIG_FT_NR_BUFFERS=3 # CONFIG_FT_PROC_FS is not set CONFIG_FT_NORMAL_DEBUG=y # CONFIG_FT_FULL_DEBUG is not set # CONFIG_FT_NO_TRACE is not set # CONFIG_FT_NO_TRACE_AT_ALL is not set # # Hardware configuration # CONFIG_FT_STD_FDC=y # CONFIG_FT_MACH2 is not set # CONFIG_FT_PROBE_FC10 is not set # CONFIG_FT_ALT_FDC is not set CONFIG_FT_FDC_THR=8 CONFIG_FT_FDC_MAX_RATE=2000 # # ONLY for DEC Alpha architectures # CONFIG_FT_ALPHA_CLOCK=0 # # Filesystems # CONFIG_QUOTA=y CONFIG_AUTOFS_FS=m CONFIG_ADFS_FS=m CONFIG_AFFS_FS=m CONFIG_HFS_FS=m CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_UMSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_MINIX_FS=y CONFIG_NTFS_FS=m # CONFIG_NTFS_RW is not set CONFIG_HPFS_FS=m CONFIG_PROC_FS=y CONFIG_DEVPTS_FS=y CONFIG_QNX4FS_FS=m # CONFIG_QNX4FS_RW is not set CONFIG_ROMFS_FS=m CONFIG_EXT2_FS=y CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set CONFIG_EFS_FS=m CONFIG_SGI_PARTITION=y # # Network File Systems # CONFIG_CODA_FS=m CONFIG_NFS_FS=m CONFIG_NFSD=m # CONFIG_NFSD_SUN is not set CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_SMB_FS=m CONFIG_NCP_FS=m # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_MOUNT_SUBDIR is not set CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y # # Partition Types # CONFIG_BSD_DISKLABEL=y CONFIG_MAC_PARTITION=y CONFIG_SMD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_AMIGA_PARTITION=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m # # Console drivers # CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y CONFIG_MDA_CONSOLE=m CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FB_PM2 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_VESA is not set # CONFIG_FB_VGA16 is not set CONFIG_VIDEO_SELECT=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y CONFIG_FB_MATROX_G100=y CONFIG_FB_MATROX_MULTIHEAD=y # CONFIG_FB_ATY128 is not set CONFIG_FB_VIRTUAL=m CONFIG_FBCON_ADVANCED=y CONFIG_FBCON_MFB=m CONFIG_FBCON_CFB2=m CONFIG_FBCON_CFB4=m CONFIG_FBCON_CFB8=m CONFIG_FBCON_CFB16=m CONFIG_FBCON_CFB24=m CONFIG_FBCON_CFB32=m # CONFIG_FBCON_AFB is not set # CONFIG_FBCON_ILBM is not set # CONFIG_FBCON_IPLAN2P2 is not set # CONFIG_FBCON_IPLAN2P4 is not set # CONFIG_FBCON_IPLAN2P8 is not set # CONFIG_FBCON_MAC is not set # CONFIG_FBCON_VGA_PLANES is not set CONFIG_FBCON_VGA=m # CONFIG_FBCON_FONTWIDTH8_ONLY is not set # CONFIG_FBCON_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Sound # # CONFIG_SOUND is not set # # Kernel hacking # # CONFIG_MAGIC_SYSRQ is not set