Hi Mike, Patch #1 is a fix for 3.10 please - Due to an unbalanced spinlock in vt8500_dclk_set_rate() we get kernel dumps on bootup.
Patch #2 adds support for the PLL clocks on WM8850 - originally it was thought these were the same as WM8750, but with the release of vendor source it's now confirmed to be different. Patch #3 removes a check (which is also done in vt8500_dclk_round_rate) to ensure the divisor is correct. Due to rounding errors, this usually results in a lower than requested clock rate. Because round_rate is always called on all our clocks, this test is actually redundant so I have dropped it. Patch #4 is to add clk-vt8500.c to MAINTAINERS Regards Tony Prisk Tony Prisk (4): clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() clk: vt8500: Add support for clocks on the WM8850 SoCs clk: vt8500: Remove unnecessary divisor adjustment in vtwm_dclk_set_rate() MAINTAINERS: vt8500: Add clk-vt8500.c to MAINTAINERS file Documentation/devicetree/bindings/clock/vt8500.txt | 2 + MAINTAINERS | 1 + drivers/clk/clk-vt8500.c | 77 ++++++++++++++++++-- 3 files changed, 75 insertions(+), 5 deletions(-) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/