Hi all,
I had an oops some days ago which I posted.
Here is a new one... well, actually 4 new ones :-(
I had to reboot before I could ksymoops my logs because the box was frozen
hard, so I don't know if the ksymoops output is valid (I can't judge, I
don't know what it should look like :-)
Here it comes :
first a dmesg
-----
Linux version 2.2.17 (root@hal) (gcc version 2.7.2.3) #1 Mon Nov 20 18:33:32 CET 2000
Detected 737031 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1471.28 BogoMIPS
Memory: 256816k/262016k available (1564k kernel code, 416k reserved, 3076k data, 144k
init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf0d90
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=244b
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
hda: ASUS CD-S500/A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 50X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sim710: No NCR53C710 adapter found.
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
sym53c8xx: at PCI bus 2, device 11, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c860 detected with Symbios NVRAM
sym53c860-0: rev=0x02, base=0xeb800000, io_port=0xd800, irq=9
sym53c860-0: NCR clock is 80074KHz, 80074KHz
sym53c860-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
sym53c860-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym53c860-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/ce/a0/00/08/00
sym53c860-0: resetting, command processing suspended for 2 seconds
sym53c860-0: restart (scsi reset).
ncr53c8xx: at PCI bus 2, device 11, function 0
ncr53c8xx: IO region 0xd800 to 0xd87f is in use
sym53c860-0: command processing resumed
Adaptec: Reading the hardware resource table. This could take up to 5 minutes
Adaptec: Hardware resource table read.
Failed initialization of WD-7000 SCSI card!
megaraid: v107 (December 22, 1999)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi0 : sym53c8xx - version 1.3g
scsi1 : Vendor: Adaptec Model: 2100S Rev: 320R
scsi : 2 hosts.
Vendor: HP Model: HP35480A Rev: M902
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: ADAPTEC Model: MAIN Rev: 320R
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 71716864 [35018 MB] [35.0 GB]
Partition check:
sda: sda1 sda2 sda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 144k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 248996k swap-space (priority -1)
3c59x.c:v0.99H 12Jun00 Donald Becker and others
http://www.scyld.com/network/vortex.html
eth0: 3Com 3c905C Tornado at 0xd400, 00:01:02:db:e4:9c, IRQ 9
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NET4: AppleTalk 0.18 for Linux NET4.0
Then the log :
------
May 11 11:33:28 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:33:28 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:34:34 hal kernel: Oops: 0000
May 11 11:34:34 hal kernel: CPU: 0
May 11 11:34:34 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:34:34 hal kernel: EFLAGS: 00010202
May 11 11:34:34 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000004 edx:
0000002f
May 11 11:34:34 hal kernel: esi: c2ff7b41 edi: 00000003 ebp: cf9265a0 esp:
cb5dbf00
May 11 11:34:34 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:34:34 hal kernel: Process imapd (pid: 17357, process nr: 33,
stackpage=cb5db000)
May 11 11:34:34 hal kernel: Stack: cfcbc060 c2ff7b2c caa18540 c2ff7b3c 00000004
0006e9b5 c0146c61 c2ff7b2c
May 11 11:34:34 hal kernel: cfcbc060 00000003 c2ff7a90 cb5da000 cb5b7760
cfcbc060 cfcbc060 c2eca001
May 11 11:34:34 hal kernel: c012ccf4 cb5b7760 cfcbc060 0000000b cb5b7760
c2eca006 0000000b c012ce68
May 11 11:34:34 hal kernel: Call Trace: [ext2_follow_link+101/132]
[do_follow_link+76/136] [lookup_dentry+312/428] [__namei+41/92] [sys_newstat+19/100]
[system_call+52/56]
May 11 11:34:34 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
May 11 11:35:25 hal kernel: Oops: 0000
May 11 11:35:25 hal kernel: CPU: 0
May 11 11:35:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:25 hal kernel: EFLAGS: 00010202
May 11 11:35:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx:
00000000
May 11 11:35:25 hal kernel: esi: c57f5018 edi: 00000001 ebp: cf9265a0 esp:
cba63f78
May 11 11:35:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:25 hal kernel: Process smbd (pid: 16477, process nr: 60,
stackpage=cba63000)
May 11 11:35:25 hal kernel: Stack: 00000001 bffffbfc c57f5000 c57f5010 00000008
2845f255 c012cf05 c57f5000
May 11 11:35:25 hal kernel: 00000000 00000001 cba62000 0811c410 0811c370
c01252e2 08111c00 00000001
May 11 11:35:25 hal kernel: cba62000 0811c410 c010a0a8 08111c00 08111c18
0811c370 0811c410 0811c370
May 11 11:35:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104]
[system_call+52/56] [startup_32+43/285]
May 11 11:35:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
May 11 11:35:25 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:35:46 hal last message repeated 11 times
May 11 11:35:48 hal kernel: Oops: 0000
May 11 11:35:48 hal kernel: CPU: 0
May 11 11:35:48 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:48 hal kernel: EFLAGS: 00010202
May 11 11:35:48 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx:
00000000
May 11 11:35:48 hal kernel: esi: c3333018 edi: 00000001 ebp: cf9265a0 esp:
c4e25f78
May 11 11:35:48 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:48 hal kernel: Process smbd (pid: 16470, process nr: 25,
stackpage=c4e25000)
May 11 11:35:48 hal kernel: Stack: 00000001 bffffbfc c3333000 c3333010 00000008
2845f255 c012cf05 c3333000
May 11 11:35:48 hal kernel: 00000000 00000001 c4e24000 0811c410 0811c370
c01252e2 08111c00 00000001
May 11 11:35:48 hal kernel: c4e24000 0811c410 c010a0a8 08111c00 08111c18
0811c370 0811c410 0811c370
May 11 11:35:48 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104]
[system_call+52/56] [startup_32+43/285]
May 11 11:35:48 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
May 11 11:35:48 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:36:16 hal last message repeated 13 times
May 11 11:36:25 hal kernel: Oops: 0000
May 11 11:36:25 hal kernel: CPU: 0
May 11 11:36:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:36:25 hal kernel: EFLAGS: 00010202
May 11 11:36:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx:
00000000
May 11 11:36:25 hal kernel: esi: ca050018 edi: 00000001 ebp: cf9265a0 esp:
c51fdf78
May 11 11:36:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:36:25 hal kernel: Process smbd (pid: 16494, process nr: 84,
stackpage=c51fd000)
May 11 11:36:25 hal kernel: Stack: 00000001 bffffbfc ca050000 ca050010 00000008
2845f255 c012cf05 ca050000
May 11 11:36:25 hal kernel: 00000000 00000001 c51fc000 0811c410 0811c370
c01252e2 08111c00 00000001
May 11 11:36:25 hal kernel: c51fc000 0811c410 c010a0a8 08111c00 08111c18
0811c370 0811c410 0811c370
May 11 11:36:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104]
[system_call+52/56] [startup_32+43/285]
May 11 11:36:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
May 11 11:36:25 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:36:33 hal last message repeated 7 times
May 11 11:37:51 hal last message repeated 6 times
May 11 11:40:37 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:41:04 hal last message repeated 7 times
May 11 11:42:18 hal last message repeated 2 times
then ksymoops' output (the defaults are valid, but I had to reboot so maybe
the output is not valid):
------
ksymoops 2.3.4 on i686 2.2.17. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.2.17/ (default)
-m /boot/System.map-2.2.17 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
May 11 11:34:34 hal kernel: Oops: 0000
May 11 11:34:34 hal kernel: CPU: 0
May 11 11:34:34 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:34:34 hal kernel: EFLAGS: 00010202
May 11 11:34:34 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000004 edx:
0000002f
May 11 11:34:34 hal kernel: esi: c2ff7b41 edi: 00000003 ebp: cf9265a0 esp:
cb5dbf00
May 11 11:34:34 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:34:34 hal kernel: Process imapd (pid: 17357, process nr: 33,
stackpage=cb5db000)
May 11 11:34:34 hal kernel: Stack: cfcbc060 c2ff7b2c caa18540 c2ff7b3c 00000004
0006e9b5 c0146c61 c2ff7b2c
May 11 11:34:34 hal kernel: cfcbc060 00000003 c2ff7a90 cb5da000 cb5b7760
cfcbc060 cfcbc060 c2eca001
May 11 11:34:34 hal kernel: c012ccf4 cb5b7760 cfcbc060 0000000b cb5b7760
c2eca006 0000000b c012ce68
May 11 11:34:34 hal kernel: Call Trace: [ext2_follow_link+101/132]
[do_follow_link+76/136] [lookup_dentry+312/428] [__namei+41/92] [sys_newstat+19/100]
[system_call+52/56]
May 11 11:34:34 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
Using defaults from ksymoops -t elf32-i386 -a i386
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
May 11 11:35:25 hal kernel: Oops: 0000
May 11 11:35:25 hal kernel: CPU: 0
May 11 11:35:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:25 hal kernel: EFLAGS: 00010202
May 11 11:35:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx:
00000000
May 11 11:35:25 hal kernel: esi: c57f5018 edi: 00000001 ebp: cf9265a0 esp:
cba63f78
May 11 11:35:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:25 hal kernel: Process smbd (pid: 16477, process nr: 60,
stackpage=cba63000)
May 11 11:35:25 hal kernel: Stack: 00000001 bffffbfc c57f5000 c57f5010 00000008
2845f255 c012cf05 c57f5000
May 11 11:35:25 hal kernel: 00000000 00000001 cba62000 0811c410 0811c370
c01252e2 08111c00 00000001
May 11 11:35:25 hal kernel: cba62000 0811c410 c010a0a8 08111c00 08111c18
0811c370 0811c410 0811c370
May 11 11:35:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104]
[system_call+52/56] [startup_32+43/285]
May 11 11:35:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
May 11 11:35:48 hal kernel: Oops: 0000
May 11 11:35:48 hal kernel: CPU: 0
May 11 11:35:48 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:48 hal kernel: EFLAGS: 00010202
May 11 11:35:48 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx:
00000000
May 11 11:35:48 hal kernel: esi: c3333018 edi: 00000001 ebp: cf9265a0 esp:
c4e25f78
May 11 11:35:48 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:48 hal kernel: Process smbd (pid: 16470, process nr: 25,
stackpage=c4e25000)
May 11 11:35:48 hal kernel: Stack: 00000001 bffffbfc c3333000 c3333010 00000008
2845f255 c012cf05 c3333000
May 11 11:35:48 hal kernel: 00000000 00000001 c4e24000 0811c410 0811c370
c01252e2 08111c00 00000001
May 11 11:35:48 hal kernel: c4e24000 0811c410 c010a0a8 08111c00 08111c18
0811c370 0811c410 0811c370
May 11 11:35:48 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104]
[system_call+52/56] [startup_32+43/285]
May 11 11:35:48 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
May 11 11:36:25 hal kernel: Oops: 0000
May 11 11:36:25 hal kernel: CPU: 0
May 11 11:36:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:36:25 hal kernel: EFLAGS: 00010202
May 11 11:36:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx:
00000000
May 11 11:36:25 hal kernel: esi: ca050018 edi: 00000001 ebp: cf9265a0 esp:
c51fdf78
May 11 11:36:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:36:25 hal kernel: Process smbd (pid: 16494, process nr: 84,
stackpage=c51fd000)
May 11 11:36:25 hal kernel: Stack: 00000001 bffffbfc ca050000 ca050010 00000008
2845f255 c012cf05 ca050000
May 11 11:36:25 hal kernel: 00000000 00000001 c51fc000 0811c410 0811c370
c01252e2 08111c00 00000001
May 11 11:36:25 hal kernel: c51fc000 0811c410 c010a0a8 08111c00 08111c18
0811c370 0811c410 0811c370
May 11 11:36:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104]
[system_call+52/56] [startup_32+43/285]
May 11 11:36:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4
08 85 c0
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
1 warning issued. Results may not be reliable.
Do you need something else ?
--
Remi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
