From: Nikolay Balandin <nbalan...@dev.rtsoft.ru>
Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: Nikolay Balandin <nbalan...@dev.rtsoft.ru>
---
drivers/rtc/rtc-ds1307.c | 57 +++++++++++++++++-----------------------------
1 file changed, 21 insertions(+), 36 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index b53992a..9852f55 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -683,7 +683,9 @@ static int ds1307_probe(struct i2c_client *client,
&& !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
return -EIO;
- ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL);
+ ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307),
+ GFP_KERNEL);
+
if (!ds1307)
return -ENOMEM;
@@ -714,8 +716,7 @@ static int ds1307_probe(struct i2c_client *client,
DS1337_REG_CONTROL, 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit_free;
+ return -EIO;
}
/* oscillator off? turn it on, so clock can tick. */
@@ -753,8 +754,7 @@ static int ds1307_probe(struct i2c_client *client,
RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit_free;
+ return -EIO;
}
/* oscillator off? turn it on, so clock can tick. */
@@ -797,8 +797,7 @@ static int ds1307_probe(struct i2c_client *client,
RX8025_REG_CTRL1 << 4 | 0x08, 2, buf);
if (tmp != 2) {
dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit_free;
+ return -EIO;
}
/* correct hour */
@@ -825,8 +824,7 @@ read_rtc:
tmp = ds1307->read_block_data(ds1307->client, ds1307->offset, 8, buf);
if (tmp != 8) {
dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit_free;
+ return -EIO;
}
/*
@@ -867,8 +865,7 @@ read_rtc:
tmp = i2c_smbus_read_byte_data(client, DS1340_REG_FLAG);
if (tmp < 0) {
dev_dbg(&client->dev, "read error %d\n", tmp);
- err = -EIO;
- goto exit_free;
+ return -EIO;
}
/* oscillator fault? clear flag, and warn */
@@ -927,13 +924,13 @@ read_rtc:
bin2bcd(tmp));
}
- ds1307->rtc = rtc_device_register(client->name, &client->dev,
+ ds1307->rtc = devm_rtc_device_register(&client->dev, client->name,
&ds13xx_rtc_ops, THIS_MODULE);
if (IS_ERR(ds1307->rtc)) {
err = PTR_ERR(ds1307->rtc);
dev_err(&client->dev,
"unable to register the class device\n");
- goto exit_free;
+ return err;
}
if (want_irq) {
@@ -942,7 +939,7 @@ read_rtc:
if (err) {
dev_err(&client->dev,
"unable to request IRQ!\n");
- goto exit_irq;
+ return err;
}
device_set_wakeup_capable(&client->dev, 1);
@@ -951,12 +948,12 @@ read_rtc:
}
if (chip->nvram_size) {
- ds1307->nvram = kzalloc(sizeof(struct bin_attribute),
- GFP_KERNEL);
- if (!ds1307->nvram) {
- err = -ENOMEM;
- goto exit_nvram;
- }
+ ds1307->nvram = devm_kzalloc(&client->dev,
+ sizeof(struct bin_attribute), GFP_KERNEL);
+
+ if (!ds1307->nvram)
+ return -ENOMEM;
+
ds1307->nvram->attr.name = "nvram";
ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR;
sysfs_bin_attr_init(ds1307->nvram);
@@ -965,22 +962,14 @@ read_rtc:
ds1307->nvram->size = chip->nvram_size;
ds1307->nvram_offset = chip->nvram_offset;
err = sysfs_create_bin_file(&client->dev.kobj, ds1307->nvram);
- if (err) {
- kfree(ds1307->nvram);
- goto exit_nvram;
- }
+ if (err)
+ return err;
+
set_bit(HAS_NVRAM, &ds1307->flags);
dev_info(&client->dev, "%zu bytes nvram\n",
ds1307->nvram->size);
}
return 0;
-
-exit_nvram:
-exit_irq:
- rtc_device_unregister(ds1307->rtc);
-exit_free:
- kfree(ds1307);
- return err;
}
static int ds1307_remove(struct i2c_client *client)
@@ -992,13 +981,9 @@ static int ds1307_remove(struct i2c_client *client)
cancel_work_sync(&ds1307->work);
}
- if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags)) {
+ if (test_and_clear_bit(HAS_NVRAM, &ds1307->flags))
sysfs_remove_bin_file(&client->dev.kobj, ds1307->nvram);
- kfree(ds1307->nvram);
- }
- rtc_device_unregister(ds1307->rtc);
- kfree(ds1307);
return 0;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
