3.2.46-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhov...@gmail.com>

commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream.

Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.

Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.

Signed-off-by: Johan Hovold <jhov...@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroc...@atmel.com>
Signed-off-by: Chris Ball <c...@laptop.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <b...@decadent.org.uk>
---
 arch/arm/configs/at91sam9g45_defconfig |    1 -
 arch/avr32/configs/favr-32_defconfig   |    1 -
 arch/avr32/configs/merisc_defconfig    |    1 -
 drivers/mmc/host/Kconfig               |   10 ----------
 drivers/mmc/host/atmel-mci.c           |    2 --
 5 files changed, 15 deletions(-)

--- a/arch/arm/configs/at91sam9g45_defconfig
+++ b/arch/arm/configs/at91sam9g45_defconfig
@@ -173,7 +173,6 @@ CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_SDIO_UART=m
 CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
 CONFIG_LEDS_ATMEL_PWM=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGER_TIMER=y
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -122,7 +122,6 @@ CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ATMEL_PWM=m
--- a/arch/avr32/configs/merisc_defconfig
+++ b/arch/avr32/configs/merisc_defconfig
@@ -102,7 +102,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ATMEL_PWM=y
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -297,16 +297,6 @@ config MMC_ATMELMCI
 
 endchoice
 
-config MMC_ATMELMCI_DMA
-       bool "Atmel MCI DMA support"
-       depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
-       help
-         Say Y here to have the Atmel MCI driver use a DMA engine to
-         do data transfers and thus increase the throughput and
-         reduce the CPU utilization.
-
-         If unsure, say N.
-
 config MMC_IMX
        tristate "Motorola i.MX Multimedia Card Interface support"
        depends on ARCH_MX1
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -2167,10 +2167,8 @@ static int __exit atmci_remove(struct pl
        atmci_readl(host, ATMCI_SR);
        clk_disable(host->mck);
 
-#ifdef CONFIG_MMC_ATMELMCI_DMA
        if (host->dma.chan)
                dma_release_channel(host->dma.chan);
-#endif
 
        free_irq(platform_get_irq(pdev, 0), host);
        iounmap(host->regs);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to