On 05/31/13 09:30, Masanari Iida wrote:
> Correct spelling typo in printk within various drivers.
>
> Signed-off-by: Masanari Iida <standby2...@gmail.com>
Acked-by: Randy Dunlap <rdun...@infradead.org>
Thanks.
>
> ---
> drivers/acpi/acpica/utobject.c | 2 +-
> drivers/cpufreq/s3c2416-cpufreq.c | 2 +-
> drivers/net/ethernet/mellanox/mlx4/main.c | 2 +-
> drivers/net/ethernet/neterion/vxge/vxge-main.c | 2 +-
> drivers/net/wireless/ath/ath9k/Kconfig | 2 +-
> drivers/scsi/libiscsi_tcp.c | 2 +-
> drivers/scsi/pmcraid.c | 2 +-
> lib/Kconfig.kgdb | 4 ++--
> 8 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
> index 1099f5c..61a113c 100644
> --- a/drivers/acpi/acpica/utobject.c
> +++ b/drivers/acpi/acpica/utobject.c
> @@ -354,7 +354,7 @@ u8 acpi_ut_valid_internal_object(void *object)
>
> default:
> ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
> - "%p is not not an ACPI operand obj [%s]\n",
> + "%p is not an ACPI operand obj [%s]\n",
> object, acpi_ut_get_descriptor_name(object)));
> break;
> }
> diff --git a/drivers/cpufreq/s3c2416-cpufreq.c
> b/drivers/cpufreq/s3c2416-cpufreq.c
> index 4f1881e..e594c62 100644
> --- a/drivers/cpufreq/s3c2416-cpufreq.c
> +++ b/drivers/cpufreq/s3c2416-cpufreq.c
> @@ -205,7 +205,7 @@ static int s3c2416_cpufreq_leave_dvs(struct s3c2416_data
> *s3c_freq, int idx)
> ret = s3c2416_cpufreq_set_armdiv(s3c_freq,
> clk_get_rate(s3c_freq->hclk) / 1000);
> if (ret < 0) {
> - pr_err("cpufreq: Failed to to set the armdiv to %lukHz:
> %d\n",
> + pr_err("cpufreq: Failed to set the armdiv to %lukHz:
> %d\n",
> clk_get_rate(s3c_freq->hclk) / 1000, ret);
> return ret;
> }
> diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c
> b/drivers/net/ethernet/mellanox/mlx4/main.c
> index 0d32a82..c8595ec 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/main.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/main.c
> @@ -98,7 +98,7 @@ MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size,
> that defines the num"
> static bool enable_64b_cqe_eqe;
> module_param(enable_64b_cqe_eqe, bool, 0444);
> MODULE_PARM_DESC(enable_64b_cqe_eqe,
> - "Enable 64 byte CQEs/EQEs when the the FW supports this");
> + "Enable 64 byte CQEs/EQEs when the FW supports this");
>
> #define HCA_GLOBAL_CAP_MASK 0
>
> diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c
> b/drivers/net/ethernet/neterion/vxge/vxge-main.c
> index cbfaed5..5a20eaf 100644
> --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
> +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
> @@ -3444,7 +3444,7 @@ static int vxge_device_register(struct __vxge_hw_device
> *hldev,
> }
>
> vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
> - "%s : checksuming enabled", __func__);
> + "%s : checksumming enabled", __func__);
>
> if (high_dma) {
> ndev->features |= NETIF_F_HIGHDMA;
> diff --git a/drivers/net/wireless/ath/ath9k/Kconfig
> b/drivers/net/wireless/ath/ath9k/Kconfig
> index 3b07851..b8fe237 100644
> --- a/drivers/net/wireless/ath/ath9k/Kconfig
> +++ b/drivers/net/wireless/ath/ath9k/Kconfig
> @@ -28,7 +28,7 @@ config ATH9K
> Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
> of chipsets. For a specific list of supported external
> cards, laptops that already ship with these cards and
> - APs that come with these cards refer to to ath9k wiki
> + APs that come with these cards refer to ath9k wiki
> products page:
>
> http://wireless.kernel.org/en/users/Drivers/ath9k/products
> diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
> index 552e8a2..92deec5 100644
> --- a/drivers/scsi/libiscsi_tcp.c
> +++ b/drivers/scsi/libiscsi_tcp.c
> @@ -558,7 +558,7 @@ static int iscsi_tcp_r2t_rsp(struct iscsi_conn *conn,
> struct iscsi_task *task)
> if (!rc) {
> iscsi_conn_printk(KERN_ERR, conn, "Could not allocate R2T. "
> "Target has sent more R2Ts than it "
> - "negotiated for or driver has has leaked.\n");
> + "negotiated for or driver has leaked.\n");
> return ISCSI_ERR_PROTO;
> }
>
> diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
> index 8e1b737..1eb7b028 100644
> --- a/drivers/scsi/pmcraid.c
> +++ b/drivers/scsi/pmcraid.c
> @@ -6092,7 +6092,7 @@ static int __init pmcraid_init(void)
>
> if (IS_ERR(pmcraid_class)) {
> error = PTR_ERR(pmcraid_class);
> - pmcraid_err("failed to register with with sysfs, error = %x\n",
> + pmcraid_err("failed to register with sysfs, error = %x\n",
> error);
> goto out_unreg_chrdev;
> }
> diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
> index 140e878..358eb81 100644
> --- a/lib/Kconfig.kgdb
> +++ b/lib/Kconfig.kgdb
> @@ -64,8 +64,8 @@ config KGDB_LOW_LEVEL_TRAP
> default n
> help
> This will add an extra call back to kgdb for the breakpoint
> - exception handler on which will will allow kgdb to step
> - through a notify handler.
> + exception handler which will allow kgdb to step through a
> + notify handler.
>
> config KGDB_KDB
> bool "KGDB_KDB: include kdb frontend for kgdb"
>
--
~Randy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
