Grygorii Strashko <grygorii.stras...@ti.com> writes:
> Hi Kevin,
> On 06/03/2013 11:59 PM, Kevin Hilman wrote:
>> Grygorii Strashko <grygorii.stras...@ti.com> writes:
>>
>>> The OMAP I2C driver has a relation to pinctrl-single driver. As result,
>>> its probe will be deferred during system boot until late init time,
>>> because the pinctrl-single is initizalized as moudle/device init time.
>>> This, in turn, will delay initialization of all I2C devices (like mfd,
>>> I2C regulators and etc.) and cause boot delay (more over, it can broken
>>> initialization of drivers which are not ready to use deferred probe
>>> mechanism yet, for example DSS).
>>>
>>> There are no sense to keep OMAP I2C initialization on subsys init layer
>>> any more, hence shift it to module/device layer where the i2c <-->
>>> pinctrl-single dependency is resolved in drivers/Makefile now.
>>>
>>> Cc: Wolfram Sang <w...@the-dreams.de>
>>> Cc: "Ben Dooks (embedded platforms)" <ben-li...@fluff.org>
>>> Cc: Santosh Shilimkar <santosh.shilim...@ti.com>
>>> Cc: linux-o...@vger.kernel.org
>>> Cc: linux-...@vger.kernel.org
>>> Cc: linux-kernel@vger.kernel.org
>>>
>>> Signed-off-by: Grygorii Strashko <grygorii.stras...@ti.com>
>> Testing this patch with PATCH 1/2, the twl_rtc driver fails to correctly
>> initialize on OMAP3:
>>
>> twl_rtc rtc.22: hctosys: invalid date/time
>>
>> instead of the expected result:
>>
>> twl_rtc rtc.22: setting system clock to 2000-01-01 00:00:00 UTC
>> (946684800)
>>
>> so something is still not right for the init sequence.
>>
>> Kevin
> I think, the root cause of the problem isn't this patch - it's just
> yet another side effect
> of using deferred probes :). I've taken a look on twl-rtc code and
> found possible error place
> static int __init twl_rtc_init(void)
> {
> if (twl_class_is_4030()) <------ here,
> rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
> else
> rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
>
> return platform_driver_register(&twl4030rtc_driver);
> }
> In drivers/Makefile:
> obj-$(CONFIG_RTC_LIB) += rtc/ <------ RTC is placed before I2C
> obj-y += i2c/ media/ <----- and only here I2C bus
> instantiates TWL-core device
> and configures twl_priv->twl_id
>
> Thats why it's working on my OMAP4/twl6030 board. Could you check if
> below fix will work on OMAP3:
Yes, your fix works. Thanks for digging into it.
Care to send a proper patch? Please be sure to send to Andrew Morton
also, since he'll be the one to queue the RTC patch.
> diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
> index 8751a52..aaa5015 100644
> --- a/drivers/rtc/rtc-twl.c
> +++ b/drivers/rtc/rtc-twl.c
> @@ -469,6 +469,11 @@ static int twl_rtc_probe(struct platform_device *pdev)
> if (irq <= 0)
> goto out1;
>
> + if (twl_class_is_4030())
> + rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
> + else
> + rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
> +
> ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
> if (ret < 0)
> goto out1;
> @@ -610,11 +615,6 @@ static struct platform_driver twl4030rtc_driver = {
>
> static int __init twl_rtc_init(void)
> {
> - if (twl_class_is_4030())
> - rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
> - else
> - rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
> -
> return platform_driver_register(&twl4030rtc_driver);
> }
> module_init(twl_rtc_init);
>
> Unfortunately, I have no OMAP3 HW and can't check it.
I suggest you find a Beagle or Gumstix/Overo type board someplace.
There is an abundance of cheap OMAP3 hardware available.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
