Ping Bjorn, could you please tell your impression on this idea?
This fix is very important for kdump. For exmaple, kdump does not work if PCI passthrough is used on KVM guest. Please see patch description for details. If you don't agree this patch, please tell me what changes I should make. Thanks, Takao Indoh (2013/05/14 14:29), Takao Indoh wrote: > This patch resets PCIe devices on boot to stop ongoing DMA. When > "pci=pcie_reset_endpoint_devices" is specified, a hot reset is triggered > on each PCIe root port and downstream port to reset its downstream > endpoint. > > Problem: > This patch solves the problem that kdump can fail when intel_iommu=on is > specified. When intel_iommu=on is specified, many dma-remapping errors > occur in second kernel and it causes problems like driver error or PCI > SERR, at last kdump fails. This problem is caused as follows. > 1) Devices are working on first kernel. > 2) Switch to second kernel(kdump kernel). The devices are still working > and its DMA continues during this switch. > 3) iommu is initialized during second kernel boot and ongoing DMA causes > dma-remapping errors. > > Solution: > All DMA transactions have to be stopped before iommu is initialized. By > this patch devices are reset and in-flight DMA is stopped before > pci_iommu_init. > > To invoke hot reset on an endpoint, its upstream link need to be reset. > reset_pcie_endpoints() is called from fs_initcall_sync, and it finds > root port/downstream port whose child is PCIe endpoint, and then reset > link between them. If the endpoint is VGA device, it is skipped because > the monitor blacks out if VGA controller is reset. > > Changelog: > v2: > - Read pci config before de-assert secondary bus reset to flush previous > write > - Change function/variable name > - Make a list of devices to be reset > > v1: > https://patchwork.kernel.org/patch/2482291/ > > Signed-off-by: Takao Indoh <indou.ta...@jp.fujitsu.com> > --- > Documentation/kernel-parameters.txt | 2 + > drivers/pci/pci.c | 113 > +++++++++++++++++++++++++++++++++++ > 2 files changed, 115 insertions(+), 0 deletions(-) > > diff --git a/Documentation/kernel-parameters.txt > b/Documentation/kernel-parameters.txt > index c3bfacb..8c9e8e4 100644 > --- a/Documentation/kernel-parameters.txt > +++ b/Documentation/kernel-parameters.txt > @@ -2321,6 +2321,8 @@ bytes respectively. Such letter suffixes can also be > entirely omitted. > any pair of devices, possibly at the cost of > reduced performance. This also guarantees > that hot-added devices will work. > + pcie_reset_endpoint_devices Reset PCIe endpoint on boot by > + hot reset > cbiosize=nn[KMG] The fixed amount of bus space which is > reserved for the CardBus bridge's IO window. > The default value is 256 bytes. > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index a899d8b..70c1205 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -3873,6 +3873,116 @@ void __weak pci_fixup_cardbus(struct pci_bus *bus) > } > EXPORT_SYMBOL(pci_fixup_cardbus); > > +/* > + * Return true if dev is PCIe root port or downstream port whose child is > PCIe > + * endpoint except VGA device. > + */ > +static int __init need_reset(struct pci_dev *dev) > +{ > + struct pci_bus *subordinate; > + struct pci_dev *child; > + > + if (!pci_is_pcie(dev) || !dev->subordinate || > + list_empty(&dev->subordinate->devices) || > + ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) && > + (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))) > + return 0; > + > + subordinate = dev->subordinate; > + list_for_each_entry(child, &subordinate->devices, bus_list) { > + if ((pci_pcie_type(child) == PCI_EXP_TYPE_UPSTREAM) || > + (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE) || > + ((child->class >> 16) == PCI_BASE_CLASS_DISPLAY)) > + /* Don't reset switch, bridge, VGA device */ > + return 0; > + } > + > + return 1; > +} > + > +static void __init save_downstream_configs(struct pci_dev *dev) > +{ > + struct pci_bus *subordinate; > + struct pci_dev *child; > + > + subordinate = dev->subordinate; > + list_for_each_entry(child, &subordinate->devices, bus_list) { > + dev_info(&child->dev, "save state\n"); > + pci_save_state(child); > + } > +} > + > +static void __init restore_downstream_configs(struct pci_dev *dev) > +{ > + struct pci_bus *subordinate; > + struct pci_dev *child; > + > + subordinate = dev->subordinate; > + list_for_each_entry(child, &subordinate->devices, bus_list) { > + dev_info(&child->dev, "restore state\n"); > + pci_restore_state(child); > + } > +} > + > +static void __init do_downstream_device_reset(struct pci_dev *dev) > +{ > + u16 ctrl; > + > + dev_info(&dev->dev, "Reset Secondary bus\n"); > + > + /* Assert Secondary Bus Reset */ > + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); > + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; > + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); > + > + /* Read config again to flush previous write */ > + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &ctrl); > + > + msleep(2); > + > + /* De-assert Secondary Bus Reset */ > + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; > + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl); > +} > + > +struct pci_dev_entry { > + struct list_head list; > + struct pci_dev *dev; > +}; > +static int __initdata pcie_reset_endpoint_devices; > +static int __init reset_pcie_endpoints(void) > +{ > + struct pci_dev *dev = NULL; > + struct pci_dev_entry *pdev_entry, *tmp; > + LIST_HEAD(pdev_list); > + > + if (!pcie_reset_endpoint_devices) > + return 0; > + > + for_each_pci_dev(dev) > + if (need_reset(dev)) { > + pdev_entry = kmalloc(sizeof(*pdev_entry), GFP_KERNEL); > + pdev_entry->dev = dev; > + list_add(&pdev_entry->list, &pdev_list); > + } > + > + list_for_each_entry(pdev_entry, &pdev_list, list) > + save_downstream_configs(pdev_entry->dev); > + > + list_for_each_entry(pdev_entry, &pdev_list, list) > + do_downstream_device_reset(pdev_entry->dev); > + > + msleep(1000); > + > + list_for_each_entry_safe(pdev_entry, tmp, &pdev_list, list) { > + restore_downstream_configs(pdev_entry->dev); > + kfree(pdev_entry); > + } > + > + return 0; > +} > +fs_initcall_sync(reset_pcie_endpoints); > + > static int __init pci_setup(char *str) > { > while (str) { > @@ -3915,6 +4025,9 @@ static int __init pci_setup(char *str) > pcie_bus_config = PCIE_BUS_PEER2PEER; > } else if (!strncmp(str, "pcie_scan_all", 13)) { > pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS); > + } else if (!strncmp(str, "pcie_reset_endpoint_devices", > + 27)) { > + pcie_reset_endpoint_devices = 1; > } else { > printk(KERN_ERR "PCI: Unknown option `%s'\n", > str); > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
