Juri Haberland wrote:
>
> Andrew Morton wrote:
>
> > For non-modular drivers things are less easy. If you
> > want to force it to use 10baseT (if_port zero) then
> > it should work OK if you cheat and use mem_start=0x400.
> > So `ether=0,0,0x400'.
> >
> > For BNC, it should work just fine with `ether=0,0,1'.
> > If it doesn't, please shout at me. Compile the
> > driver with `static int vortex_debug = 7;' at line
> > 183 and send me the boot logs.
>
> Hi Andrew,
>
> I tried it with 'ether=0,0,1', 3 and also 7, but to no avail. The output
> of dmesg follows.
Oh, and I forgot to say, that the card is actually set to autoselection
in the EEPROM (I just had a look with the DOS tool).
Juri
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
