On Saturday, June 08, 2013 2:43 AM, Arnd Bergmann wrote:
> On Friday 07 June 2013, Jason Gunthorpe wrote:
> > Sounds fair to me.
> >
> > But when we talk about multiple domains we don't mean a disjoint range
> > bus bus numbers, as your other email shows:
> >
> > 00:00.0 PCI bridge: Samsung Electronics Co Ltd Device a549 (rev 01)
> > (prog-if 00 [Normal decode])
> > 10:00.0 PCI bridge: Samsung Electronics Co Ltd Device a549 (rev 01)
> > (prog-if 00 [Normal decode])
> >
> > We mean multiple domains, it should look like this:
> >
> > 0000:00:00.0 PCI bridge: Samsung Electronics Co Ltd Device a549 (rev 01)
> > (prog-if 00 [Normal decode])
> > 0001:00:00.0 PCI bridge: Samsung Electronics Co Ltd Device a549 (rev 01)
> > (prog-if 00 [Normal decode])
> >
> > ie lspci -D.
> >
> > Each domain gets a unique bus number range, config space, io range,
> > etc. This is much clearer to everyone than trying to pretend there is
> > only one domain when the HW is actually multi-domain.
>
> Yes, absolutely. This means we also don't need a bus-range property in DT,
> since each
> domain will allow all 255 buses.
After removing a bus-range property in DT, it looks like:
00:00.0 PCI bridge: Samsung Electronics Co Ltd Device a549 (rev 01) (prog-if 00
[Normal decode])
02:00.0 PCI bridge: Samsung Electronics Co Ltd Device a549 (rev 01) (prog-if 00
[Normal decode])
For multiple domains, how can I fix the DT properties?
Current DT properties are as below:
+ pcie0@40000000 {
+ compatible = "samsung,exynos5440-pcie";
+ reg = <0x40000000 0x4000
+ 0x290000 0x1000
+ 0x270000 0x1000
+ 0x271000 0x40>;
+ interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00200000 /*
configuration space */
+ 0x81000000 0 0 0x40200000 0 0x00004000 /*
downstream I/O */
+ 0x82000000 0 0 0x40204000 0 0x10000000>; /*
non-prefetchable memory */
+ };
+
+ pcie1@60000000 {
+ compatible = "samsung,exynos5440-pcie";
+ reg = <0x60000000 0x4000
+ 0x2a0000 0x1000
+ 0x272000 0x1000
+ 0x271040 0x40>;
+ interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00200000 /*
configuration space */
+ 0x81000000 0 0 0x60200000 0 0x00004000 /*
downstream I/O */
+ 0x82000000 0 0 0x60204000 0 0x10000000>; /*
non-prefetchable memory */
+ };
Best regards,
Jingoo Han
>
> Arnd
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
