Ccing Arnd and Olof, because I forgot to add them to git send-email...

Sorry for the noise.

On Tuesday 18 of June 2013 17:26:31 Tomasz Figa wrote:
> S5P_ARM_CORE1_* registers affect only core 1. To control further cores
> properly another registers must be used.
> 
> This patch replaces S5P_ARM_CORE1_* register definitions with
> S5P_ARM_CORE_*(x) macro which return addresses of registers for
> specified core.
> 
> This fixes CPU hotplug on quad core Exynos SoCs on which currently
> offlining CPUs 2 or 3 caused CPU 1 to be turned off.

Obviously this doesn't happen currently because of the if (cpu == 1), but 
if logical cpu1 turned out not to be physical cpu1, then it would crash.

Best regards,
Tomasz

> In addition,
> bring-up of CPU 2 and 3 is fixed on boards where bootloader powers off
> secondary cores by default.
> 
> Cc: [email protected]
> Signed-off-by: Tomasz Figa <[email protected]>
> Signed-off-by: Kyungmin Park <[email protected]>
> ---
>  arch/arm/mach-exynos/hotplug.c               |  9 +++++----
>  arch/arm/mach-exynos/include/mach/regs-pmu.h | 10 +++++++---
>  arch/arm/mach-exynos/platsmp.c               |  9 +++++----
>  3 files changed, 17 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/hotplug.c
> b/arch/arm/mach-exynos/hotplug.c index af90cfa..c089943 100644
> --- a/arch/arm/mach-exynos/hotplug.c
> +++ b/arch/arm/mach-exynos/hotplug.c
> @@ -93,10 +93,11 @@ static inline void cpu_leave_lowpower(void)
>  static inline void platform_do_lowpower(unsigned int cpu, int
> *spurious) {
>       for (;;) {
> +             void __iomem *reg_base;
> +             unsigned int phys_cpu = cpu_logical_map(cpu);
> 
> -             /* make cpu1 to be turned off at next WFI command */
> -             if (cpu == 1)
> -                     __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
> +             reg_base = S5P_ARM_CORE_CONFIGURATION(phys_cpu);
> +             __raw_writel(0, reg_base);
> 
>               /*
>                * here's the WFI
> @@ -106,7 +107,7 @@ static inline void platform_do_lowpower(unsigned int
> cpu, int *spurious)
>                   : "memory", "cc");
> 
> -             if (pen_release == cpu_logical_map(cpu)) {
> +             if (pen_release == phys_cpu) {
>                       /*
>                        * OK, proper wakeup, we're done
>                        */
> diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h
> b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 57344b7..cf40b86
> 100644
> --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
> +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
> @@ -125,10 +125,14 @@
>  #define S5P_GPS_ALIVE_LOWPWR                 S5P_PMUREG(0x13A0)
> 
>  #define S5P_ARM_CORE0_CONFIGURATION          S5P_PMUREG(0x2000)
> +#define S5P_ARM_CORE0_STATUS                 S5P_PMUREG(0x2004)
>  #define S5P_ARM_CORE0_OPTION                 S5P_PMUREG(0x2008)
> -#define S5P_ARM_CORE1_CONFIGURATION          S5P_PMUREG(0x2080)
> -#define S5P_ARM_CORE1_STATUS                 S5P_PMUREG(0x2084)
> -#define S5P_ARM_CORE1_OPTION                 S5P_PMUREG(0x2088)
> +#define S5P_ARM_CORE_CONFIGURATION(_nr)              \
> +             (S5P_ARM_CORE0_CONFIGURATION + ((_nr) * 0x80))
> +#define S5P_ARM_CORE_STATUS(_nr)             \
> +             (S5P_ARM_CORE0_STATUS + ((_nr) * 0x80))
> +#define S5P_ARM_CORE_OPTION(_nr)             \
> +             (S5P_ARM_CORE0_OPTION + ((_nr) * 0x80))
> 
>  #define S5P_ARM_COMMON_OPTION                        S5P_PMUREG(0x2408)
>  #define S5P_TOP_PWR_OPTION                   S5P_PMUREG(0x2C48)
> diff --git a/arch/arm/mach-exynos/platsmp.c
> b/arch/arm/mach-exynos/platsmp.c index d9c6d0a..2cbabc8 100644
> --- a/arch/arm/mach-exynos/platsmp.c
> +++ b/arch/arm/mach-exynos/platsmp.c
> @@ -109,14 +109,15 @@ static int __cpuinit
> exynos_boot_secondary(unsigned int cpu, struct task_struct */
>       write_pen_release(phys_cpu);
> 
> -     if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) 
{
> +     if (!(__raw_readl(S5P_ARM_CORE_STATUS(phys_cpu))
> +         & S5P_CORE_LOCAL_PWR_EN)) {
>               __raw_writel(S5P_CORE_LOCAL_PWR_EN,
> -                          S5P_ARM_CORE1_CONFIGURATION);
> +                          S5P_ARM_CORE_CONFIGURATION(phys_cpu));
> 
>               timeout = 10;
> 
>               /* wait max 10 ms until cpu1 is on */
> -             while ((__raw_readl(S5P_ARM_CORE1_STATUS)
> +             while ((__raw_readl(S5P_ARM_CORE_STATUS(phys_cpu))
>                       & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) 
{
>                       if (timeout-- == 0)
>                               break;
> @@ -125,7 +126,7 @@ static int __cpuinit exynos_boot_secondary(unsigned
> int cpu, struct task_struct }
> 
>               if (timeout == 0) {
> -                     printk(KERN_ERR "cpu1 power enable failed");
> +                     printk(KERN_ERR "cpu%u power enable failed", cpu);
>                       spin_unlock(&boot_lock);
>                       return -ETIMEDOUT;
>               }
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to