Necessary pins are now grabbed by respective drivers. Unecessary hogpins are
simply removed.
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
arch/arm/boot/dts/imx28-cfa10057.dts | 23 +++--------------------
1 file changed, 3 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts
b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2da713c..0333c05 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -23,35 +23,16 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10057
- &hog_pins_cfa10057_pullup>;
-
- hog_pins_cfa10057: hog-10057@0 {
+ usb_pins_cfa10057: usb-10057@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /*
MX28_PAD_GPMI_D7__GPIO_0_7 */
- 0x3053 /*
MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
- hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x2133 /*
MX28_PAD_SSP2_D3__GPIO_2_19 */
- 0x3183 /*
MX28_PAD_I2C0_SCL__GPIO_3_24 */
- 0x3193 /*
MX28_PAD_I2C0_SDA__GPIO_3_25 */
- 0x31a3 /*
MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
- 0x31e3 /*
MX28_PAD_LCD_RESET__GPIO_3_30 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
- };
-
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -164,6 +145,8 @@
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10057>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
