> diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c
> index e1d7696..f321bf9 100644
> --- a/drivers/spi/spi-xilinx.c
> +++ b/drivers/spi/spi-xilinx.c
> @@ -232,21 +232,6 @@ static int xilinx_spi_setup_transfer(struct spi_device 
> *spi,
>       return 0;
>  }
>  
> -static int xilinx_spi_setup(struct spi_device *spi)
> -{
> -     /* always return 0, we can not check the number of bits.
> -      * There are cases when SPI setup is called before any driver is
> -      * there, in that case the SPI core defaults to 8 bits, which we
> -      * do not support in some cases. But if we return an error, the
> -      * SPI device would not be registered and no driver can get hold of it
> -      * When the driver is there, it will call SPI setup again with the
> -      * correct number of bits per transfer.
> -      * If a driver setups with the wrong bit number, it will fail when
> -      * it tries to do a transfer
> -      */
> -     return 0;
> -}
> -
>  static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
>  {
>       u8 sr;
> @@ -377,7 +362,6 @@ struct spi_master *xilinx_spi_init(struct device *dev, 
> struct resource *mem,
>       xspi->bitbang.chipselect = xilinx_spi_chipselect;
>       xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
>       xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
> -     xspi->bitbang.master->setup = xilinx_spi_setup;
>       init_completion(&xspi->done);
>  
>       if (!request_mem_region(mem->start, resource_size(mem),
> 

This part of this patch is breaking xilinx spi driver because when
spi_bitbang_start is called it goes through some if else...
and because bitbang->txrx_bufs is defined
it end up in this code
        } else if (!master->setup) {
                return -EINVAL;
        }

Probably the best solution is just revert this part of patch.
Mark: What do you think?

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


Attachment: signature.asc
Description: OpenPGP digital signature

Reply via email to