Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.
Acked-by: Linus Walleij <linus.wall...@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <w...@the-dreams.de>
---
drivers/net/ieee802154/mrf24j40.c | 7 -------
1 file changed, 7 deletions(-)
diff --git a/drivers/net/ieee802154/mrf24j40.c
b/drivers/net/ieee802154/mrf24j40.c
index ede3ce4..42e6dee 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -22,7 +22,6 @@
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/pinctrl/consumer.h>
#include <net/wpan-phy.h>
#include <net/mac802154.h>
#include <net/ieee802154.h>
@@ -627,7 +626,6 @@ static int mrf24j40_probe(struct spi_device *spi)
int ret = -ENOMEM;
u8 val;
struct mrf24j40 *devrec;
- struct pinctrl *pinctrl;
printk(KERN_INFO "mrf24j40: probe(). IRQ: %d\n", spi->irq);
@@ -638,11 +636,6 @@ static int mrf24j40_probe(struct spi_device *spi)
if (!devrec->buf)
goto err_buf;
- pinctrl = devm_pinctrl_get_select_default(&spi->dev);
- if (IS_ERR(pinctrl))
- dev_warn(&spi->dev,
- "pinctrl pins are not configured from the driver");
-
spi->mode = SPI_MODE_0; /* TODO: Is this appropriate for right here? */
if (spi->max_speed_hz > MAX_SPI_SPEED_HZ)
spi->max_speed_hz = MAX_SPI_SPEED_HZ;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
