Hi J,
On 7/10/2013 22:38, Jean-Christophe PLAGNIOL-VILLARD wrote:
On 17:51 Wed 10 Jul , Bo Shen wrote:
add qt1070 support on at91sam9n12ek board
Signed-off-by: Bo Shen <voice.s...@atmel.com>
---
arch/arm/boot/dts/at91sam9n12ek.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
b/arch/arm/boot/dts/at91sam9n12ek.dts
index d59b70c..3acac62 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -40,6 +40,15 @@
i2c0: i2c@f8010000 {
status = "okay";
+
+ qt1070: keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioA>;
+ interrupts = <2 0x0>;
use the macro
Thanks, I will use macro here.
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ };
};
i2c1: i2c@f8014000 {
@@ -66,6 +75,13 @@
<AT91_PIOA 7
AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up
and deglitch */
};
};
+
+ qt1070 {
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOA 2
AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA2 GPIO with pull up deglith
*/
drop the comment as we use macro
OK, I will drop the comment
+ };
+ };
};
spi0: spi@f0000000 {
--
Best Regards,
J.
Best Regards,
Bo Shen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/