One of my disks had a slight hiccup. This caused mpt2sas to remove the handle to the disk. In my kernel log I get:
mpt2sas1: removing handle(0x0021), sas_addr(0x500304800182694c) By reseating the disk physically I can get mpt2sas to pick up the disk again, but can I somehow through software ask mpt2sas to detect the drive again without physically reseating the drive? I tried: parallel 'echo "- - -" >' ::: /sys/class/scsi_host/host*/scan but that did not pick up the drive. The drive is sitting in an enclosure http://www.supermicro.com/products/chassis/4u/847/sc847e26-rjbod1.cfm connected by http://www.lsi.com/channel/products/storagecomponents/Pages/LSISAS9200-8e.aspx /Ole (Please Cc answers - not subscribed to the list) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/