Hi, Resume from S3 generates WARNING: … ACPI: Low-level resume complete PM: Restoring platform NVS memory PCI-DMA: Resuming GART IOMMU PCI-DMA: Restoring GART aperture settings Enabling non-boot CPUs ... smpboot: Booting Node 0 Processor 1 APIC 0x1 [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu perf: IBS APIC setup failed on cpu #1 process: Switch to broadcast mode on CPU1 CPU1 is up smpboot: Booting Node 0 Processor 2 APIC 0x2 ------------[ cut here ]------------ 3.10.2: WARNING: at kernel/time/tick-broadcast.c:585 tick_broadcast_oneshot_control+0x170/0x180() Modules linked in: raid1 nouveau video mxm_wmi i2c_algo_bit drm_kms_helper ttm drm i2c_core wmi CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.2-301.fc19.x86_64 #1 Hardware name: Gigabyte Technology Co., Ltd. M720-US3/M720-US3, BIOS F7n 09/07/2010 0000000000000009 ffff880129b2fd68 ffffffff81642886 ffff880129b2fda0 ffffffff8105c211 0000000000000001 0000000000000004 ffff88012fc4dbc0 0000000000000002 ffffffff81c21c40 ffff880129b2fdb0 ffffffff8105c2ea Call Trace: [<ffffffff81642886>] dump_stack+0x19/0x1b [<ffffffff8105c211>] warn_slowpath_common+0x61/0x80 [<ffffffff8105c2ea>] warn_slowpath_null+0x1a/0x20 [<ffffffff810b34e0>] tick_broadcast_oneshot_control+0x170/0x180 [<ffffffff810b29dd>] tick_notify+0x2fd/0x440 [<ffffffff8164c84c>] notifier_call_chain+0x4c/0x70 [<ffffffff81086246>] raw_notifier_call_chain+0x16/0x20 [<ffffffff810b1f29>] clockevents_notify+0x39/0x140 [<ffffffff81019675>] amd_e400_idle+0x75/0x100 [<ffffffff81019e36>] arch_cpu_idle+0x26/0x30 [<ffffffff810aa3be>] cpu_startup_entry+0xce/0x280 [<ffffffff810b20e5>] ? clockevents_register_device+0xb5/0x120 [<ffffffff8163794e>] start_secondary+0x24e/0x250 ---[ end trace b32aec91b6f72d81 ]--- [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu perf: IBS APIC setup failed on cpu #2 process: Switch to broadcast mode on CPU2 CPU2 is up smpboot: Booting Node 0 Processor 3 APIC 0x3 [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu perf: IBS APIC setup failed on cpu #3 process: Switch to broadcast mode on CPU3 CPU3 is up ACPI: Waking up from system sleep state S3 …
With an additional four patches[1] WARNING persists. CONF. http://kojipkgs.fedoraproject.org//packages/kernel/3.10.2/301.fc19/data/logs/x86_64/build.log poma [1] https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/log/kernel/time/tick-broadcast.c - tick: Make oneshot broadcast robust vs. CPU offlining - tick: Prevent uncontrolled switch to oneshot mode - tick: Sanitize broadcast control logic - tick: broadcast: Check broadcast mode on CPU hotplug -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/