This patch make use of the peripheral id macros defined in
dt-bindings/at91/at91sam9260/peripherals.h to register peripheral
interrupts.
Signed-off-by: Boris BREZILLON <b.brezil...@overkiz.com>
---
arch/arm/boot/dts/at91sam9260.dtsi | 57 +++++++++++++++++++-----------------
1 file changed, 30 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi
b/arch/arm/boot/dts/at91sam9260.dtsi
index c7ccbcb..75fd07b 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/at91/at91sam9260/peripherals.h>
/ {
model = "Atmel AT91SAM9260 family SoC";
@@ -65,7 +66,9 @@
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
- atmel,external-irqs = <29 30 31>;
+ atmel,external-irqs = <AT91SAM9260_ID_IRQ0
+ AT91SAM9260_ID_IRQ1
+ AT91SAM9260_ID_IRQ2>;
};
ramc0: ramc@ffffea00 {
@@ -91,23 +94,23 @@
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
};
tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
- 18 IRQ_TYPE_LEVEL_HIGH 0
- 19 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9260_ID_TC0
IRQ_TYPE_LEVEL_HIGH 0
+ AT91SAM9260_ID_TC1
IRQ_TYPE_LEVEL_HIGH 0
+ AT91SAM9260_ID_TC2
IRQ_TYPE_LEVEL_HIGH 0>;
};
tcb1: timer@fffdc000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffdc000 0x100>;
- interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
- 27 IRQ_TYPE_LEVEL_HIGH 0
- 28 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9260_ID_TC3
IRQ_TYPE_LEVEL_HIGH 0
+ AT91SAM9260_ID_TC4
IRQ_TYPE_LEVEL_HIGH 0
+ AT91SAM9260_ID_TC5
IRQ_TYPE_LEVEL_HIGH 0>;
};
pinctrl@fffff400 {
@@ -438,7 +441,7 @@
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9260_ID_PIOA
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -448,7 +451,7 @@
pioB: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9260_ID_PIOB
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -458,7 +461,7 @@
pioC: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ interrupts = <AT91SAM9260_ID_PIOC
IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
@@ -469,7 +472,7 @@
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
- interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupts = <AT91_ID_SYS IRQ_TYPE_LEVEL_HIGH
7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
status = "disabled";
@@ -478,7 +481,7 @@
usart0: serial@fffb0000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb0000 0x200>;
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9260_ID_US0
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -489,7 +492,7 @@
usart1: serial@fffb4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb4000 0x200>;
- interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9260_ID_US1
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -500,7 +503,7 @@
usart2: serial@fffb8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb8000 0x200>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9260_ID_US2
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -511,7 +514,7 @@
usart3: serial@fffd0000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd0000 0x200>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9260_ID_US3
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -522,7 +525,7 @@
uart0: serial@fffd4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9260_ID_US4
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -533,7 +536,7 @@
uart1: serial@fffd8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>;
- interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9260_ID_US5
IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
@@ -544,7 +547,7 @@
macb0: ethernet@fffc4000 {
compatible = "cdns,at32ap7000-macb",
"cdns,macb";
reg = <0xfffc4000 0x100>;
- interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9260_ID_EMAC
IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
status = "disabled";
@@ -553,14 +556,14 @@
usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc";
reg = <0xfffa4000 0x4000>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9260_ID_UDP
IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
i2c0: i2c@fffac000 {
compatible = "atmel,at91sam9260-i2c";
reg = <0xfffac000 0x100>;
- interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+ interrupts = <AT91SAM9260_ID_TWI
IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -569,7 +572,7 @@
mmc0: mmc@fffa8000 {
compatible = "atmel,hsmci";
reg = <0xfffa8000 0x600>;
- interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9260_ID_MCI
IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -578,7 +581,7 @@
ssc0: ssc@fffbc000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>;
- interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ interrupts = <AT91SAM9260_ID_SSC
IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
@@ -589,7 +592,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffc8000 0x200>;
- interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9260_ID_SPI0
IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
status = "disabled";
@@ -600,7 +603,7 @@
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffcc000 0x200>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ interrupts = <AT91SAM9260_ID_SPI1
IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
status = "disabled";
@@ -609,7 +612,7 @@
adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupts = <AT91SAM9260_ID_ADC
IRQ_TYPE_LEVEL_HIGH 0>;
atmel,adc-use-external-triggers;
atmel,adc-channels-used = <0xf>;
atmel,adc-vref = <3300>;
@@ -672,7 +675,7 @@
usb0: ohci@00500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
- interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+ interrupts = <AT91SAM9260_ID_UHP IRQ_TYPE_LEVEL_HIGH 2>;
status = "disabled";
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
