Hello Richard,
On 07/08/2013 12:38, Richard Genoud wrote:
2013/8/7 Boris BREZILLON <b.brezil...@overkiz.com>:
This patch splits the sam9x5 peripheral definitions into:
- a common base for all sam9x5 SoCs (at91sam9x5.dtsi)
- several optional peripheral definitions which will be included by specific
sam9x5 SoCs (at91sam9x5_'periph name'.dtsi)
This provides a better representation of the real hardware (drop unneeded
dt nodes) and avoids future peripheral id conflict (lcdc and isi both use
peripheral id 25).
Signed-off-by: Boris BREZILLON <b.brezil...@overkiz.com>
---
arch/arm/boot/dts/at91sam9g25.dtsi | 2 +
arch/arm/boot/dts/at91sam9g35.dtsi | 1 +
arch/arm/boot/dts/at91sam9x25.dtsi | 24 ++---------
arch/arm/boot/dts/at91sam9x35.dtsi | 1 +
arch/arm/boot/dts/at91sam9x5.dtsi | 67 ------------------------------
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 56 +++++++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 44 ++++++++++++++++++++
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 51 +++++++++++++++++++++++
8 files changed, 158 insertions(+), 88 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9x5_macb0.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5_macb1.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5_usart3.dtsi
[snip]
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
new file mode 100644
index 0000000..5589579
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -0,0 +1,51 @@
+/*
+ * at91sam9x5_lcdc.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
+ * 4 USART.
One minor comment mistake here !
Nice catch!
I'll fix it for the next version.
BTW did you test it (I didn't: I don't have any board with this SoC
family) ?
This separation was formerly done in the "at91 common clk" series but I
removed it
from the new version (which I will submit soon) to ease the review and
tests.
Best Regards,
Boris
+ *
+ * Copyright (C) 2013 Boris BREZILLON <b.brezil...@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <AT91_PIOC 22
AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PC22 periph B with pullup */
+ AT91_PIOC 23
AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC23 periph B */
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <AT91_PIOC 24
AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC24 periph B */
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <AT91_PIOC 25
AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC25 periph B */
+ };
+
+ pinctrl_usart3_sck: usart3_sck-0 {
+ atmel,pins =
+ <AT91_PIOC 26
AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC26 periph B */
+ };
+ };
+ };
+
+ usart3: serial@f8028000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf8028000 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ status = "disabled";
+ };
+ };
+ };
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
