The driver now supports the chips pca9633 and pca9634, therefore we rename the files to more genereic and meaningul names
Signed-off-by: Ricardo Ribalda Delgado <[email protected]> --- drivers/leds/Kconfig | 2 +- drivers/leds/Makefile | 2 +- drivers/leds/leds-pca9633.c | 249 ---------------------------- drivers/leds/leds-pca963x.c | 249 ++++++++++++++++++++++++++++ include/linux/platform_data/leds-pca9633.h | 35 ---- include/linux/platform_data/leds-pca963x.h | 36 ++++ 6 files changed, 287 insertions(+), 286 deletions(-) delete mode 100644 drivers/leds/leds-pca9633.c create mode 100644 drivers/leds/leds-pca963x.c delete mode 100644 include/linux/platform_data/leds-pca9633.h create mode 100644 include/linux/platform_data/leds-pca963x.h diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 023af58..d5cb477 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -279,7 +279,7 @@ config LEDS_PCA955X LED driver chips accessed via the I2C bus. Supported devices include PCA9550, PCA9551, PCA9552, and PCA9553. -config LEDS_PCA9633 +config LEDS_PCA963X tristate "LED support for PCA963x I2C chip" depends on LEDS_CLASS depends on I2C diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index ac28977..26f9c13 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_OT200) += leds-ot200.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o -obj-$(CONFIG_LEDS_PCA9633) += leds-pca9633.o +obj-$(CONFIG_LEDS_PCA963X) += leds-pca963x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o diff --git a/drivers/leds/leds-pca9633.c b/drivers/leds/leds-pca9633.c deleted file mode 100644 index 9bf33d8..0000000 --- a/drivers/leds/leds-pca9633.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * Copyright 2011 bct electronic GmbH - * Copyright 2013 Qtechnology/AS - * - * Author: Peter Meerwald <[email protected]> - * Author: Ricardo Ribalda <[email protected]> - * - * Based on leds-pca955x.c - * - * This file is subject to the terms and conditions of version 2 of - * the GNU General Public License. See the file COPYING in the main - * directory of this archive for more details. - * - * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62) - * LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.) - * - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/leds.h> -#include <linux/err.h> -#include <linux/i2c.h> -#include <linux/workqueue.h> -#include <linux/slab.h> -#include <linux/platform_data/leds-pca9633.h> - -/* LED select registers determine the source that drives LED outputs */ -#define PCA9633_LED_OFF 0x0 /* LED driver off */ -#define PCA9633_LED_ON 0x1 /* LED driver on */ -#define PCA9633_LED_PWM 0x2 /* Controlled through PWM */ -#define PCA9633_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */ - -#define PCA9633_MODE1 0x00 -#define PCA9633_MODE2 0x01 -#define PCA9633_PWM_BASE 0x02 - -enum pca9633_type { - pca9633, - pca9634, -}; - -struct pca9633_chipdef { - u8 ledout_base; - int n_leds; -}; - -static struct pca9633_chipdef pca9633_chipdefs[] = { - [pca9633] = { - .ledout_base = 0x8, - .n_leds = 4, - }, - [pca9634] = { - .ledout_base = 0xc, - .n_leds = 8, - }, -}; - -static const struct i2c_device_id pca9633_id[] = { - { "pca9633", pca9633 }, - { "pca9634", pca9634 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, pca9633_id); - -struct pca9633_led; - -struct pca9633 { - struct pca9633_chipdef *chipdef; - struct mutex mutex; - struct i2c_client *client; - struct pca9633_led *leds; -}; - -struct pca9633_led { - struct pca9633 *chip; - struct work_struct work; - enum led_brightness brightness; - struct led_classdev led_cdev; - int led_num; /* 0 .. 7 potentially */ - char name[32]; -}; - -static void pca9633_led_work(struct work_struct *work) -{ - struct pca9633_led *pca9633 = container_of(work, - struct pca9633_led, work); - u8 ledout_addr = pca9633->chip->chipdef->ledout_base - + (pca9633->led_num / 4); - u8 ledout; - int shift = 2 * (pca9633->led_num % 4); - u8 mask = 0x3 << shift; - - mutex_lock(&pca9633->chip->mutex); - ledout = i2c_smbus_read_byte_data(pca9633->chip->client, ledout_addr); - switch (pca9633->brightness) { - case LED_FULL: - i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr, - (ledout & ~mask) | (PCA9633_LED_ON << shift)); - break; - case LED_OFF: - i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr, - ledout & ~mask); - break; - default: - i2c_smbus_write_byte_data(pca9633->chip->client, - PCA9633_PWM_BASE + pca9633->led_num, - pca9633->brightness); - i2c_smbus_write_byte_data(pca9633->chip->client, ledout_addr, - (ledout & ~mask) | (PCA9633_LED_PWM << shift)); - break; - } - mutex_unlock(&pca9633->chip->mutex); -} - -static void pca9633_led_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - struct pca9633_led *pca9633; - - pca9633 = container_of(led_cdev, struct pca9633_led, led_cdev); - - pca9633->brightness = value; - - /* - * Must use workqueue for the actual I/O since I2C operations - * can sleep. - */ - schedule_work(&pca9633->work); -} - -static int pca9633_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct pca9633 *pca9633_chip; - struct pca9633_led *pca9633; - struct pca9633_platform_data *pdata; - struct pca9633_chipdef *chip; - int i, err; - - chip = &pca9633_chipdefs[id->driver_data]; - pdata = client->dev.platform_data; - - if (pdata && (pdata->leds.num_leds < 1 || - pdata->leds.num_leds > chip->n_leds)) { - dev_err(&client->dev, "board info must claim 1-%d LEDs", - chip->n_leds); - return -EINVAL; - } - - pca9633_chip = devm_kzalloc(&client->dev, sizeof(*pca9633_chip), - GFP_KERNEL); - if (!pca9633_chip) - return -ENOMEM; - pca9633 = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca9633), - GFP_KERNEL); - if (!pca9633) - return -ENOMEM; - - i2c_set_clientdata(client, pca9633_chip); - - mutex_init(&pca9633_chip->mutex); - pca9633_chip->chipdef = chip; - pca9633_chip->client = client; - pca9633_chip->leds = pca9633; - - /* Turn off LEDs by default*/ - i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00); - if (chip->n_leds > 4) - i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00); - - for (i = 0; i < chip->n_leds; i++) { - pca9633[i].led_num = i; - pca9633[i].chip = pca9633_chip; - - /* Platform data can specify LED names and default triggers */ - if (pdata && i < pdata->leds.num_leds) { - if (pdata->leds.leds[i].name) - snprintf(pca9633[i].name, - sizeof(pca9633[i].name), "pca9633:%s", - pdata->leds.leds[i].name); - if (pdata->leds.leds[i].default_trigger) - pca9633[i].led_cdev.default_trigger = - pdata->leds.leds[i].default_trigger; - } - if (!pdata || i >= pdata->leds.num_leds || - !pdata->leds.leds[i].name) - snprintf(pca9633[i].name, sizeof(pca9633[i].name), - "pca9633:%d:%.2x:%d", client->adapter->nr, - client->addr, i); - - pca9633[i].led_cdev.name = pca9633[i].name; - pca9633[i].led_cdev.brightness_set = pca9633_led_set; - - INIT_WORK(&pca9633[i].work, pca9633_led_work); - - err = led_classdev_register(&client->dev, &pca9633[i].led_cdev); - if (err < 0) - goto exit; - } - - /* Disable LED all-call address and set normal mode */ - i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00); - - /* Configure output: open-drain or totem pole (push-pull) */ - if (pdata && pdata->outdrv == PCA9633_OPEN_DRAIN) - i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01); - - return 0; - -exit: - while (i--) { - led_classdev_unregister(&pca9633[i].led_cdev); - cancel_work_sync(&pca9633[i].work); - } - - return err; -} - -static int pca9633_remove(struct i2c_client *client) -{ - struct pca9633 *pca9633 = i2c_get_clientdata(client); - int i; - - for (i = 0; i < pca9633->chipdef->n_leds; i++) { - led_classdev_unregister(&pca9633->leds[i].led_cdev); - cancel_work_sync(&pca9633->leds[i].work); - } - - return 0; -} - -static struct i2c_driver pca9633_driver = { - .driver = { - .name = "leds-pca9633", - .owner = THIS_MODULE, - }, - .probe = pca9633_probe, - .remove = pca9633_remove, - .id_table = pca9633_id, -}; - -module_i2c_driver(pca9633_driver); - -MODULE_AUTHOR("Peter Meerwald <[email protected]>"); -MODULE_DESCRIPTION("PCA9633 LED driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c new file mode 100644 index 0000000..98ca0ed --- /dev/null +++ b/drivers/leds/leds-pca963x.c @@ -0,0 +1,249 @@ +/* + * Copyright 2011 bct electronic GmbH + * Copyright 2013 Qtechnology/AS + * + * Author: Peter Meerwald <[email protected]> + * Author: Ricardo Ribalda <[email protected]> + * + * Based on leds-pca955x.c + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * LED driver for the PCA963x I2C LED driver (7-bit slave address 0x62) + * LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.) + * + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <linux/leds.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/slab.h> +#include <linux/platform_data/leds-pca963x.h> + +/* LED select registers determine the source that drives LED outputs */ +#define PCA963X_LED_OFF 0x0 /* LED driver off */ +#define PCA963X_LED_ON 0x1 /* LED driver on */ +#define PCA963X_LED_PWM 0x2 /* Controlled through PWM */ +#define PCA963X_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */ + +#define PCA963X_MODE1 0x00 +#define PCA963X_MODE2 0x01 +#define PCA963X_PWM_BASE 0x02 + +enum pca963x_type { + pca9633, + pca9634, +}; + +struct pca963x_chipdef { + u8 ledout_base; + int n_leds; +}; + +static struct pca963x_chipdef pca963x_chipdefs[] = { + [pca9633] = { + .ledout_base = 0x8, + .n_leds = 4, + }, + [pca9634] = { + .ledout_base = 0xc, + .n_leds = 8, + }, +}; + +static const struct i2c_device_id pca963x_id[] = { + { "pca9633", pca9633 }, + { "pca9634", pca9634 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pca963x_id); + +struct pca963x_led; + +struct pca963x { + struct pca963x_chipdef *chipdef; + struct mutex mutex; + struct i2c_client *client; + struct pca963x_led *leds; +}; + +struct pca963x_led { + struct pca963x *chip; + struct work_struct work; + enum led_brightness brightness; + struct led_classdev led_cdev; + int led_num; /* 0 .. 7 potentially */ + char name[32]; +}; + +static void pca963x_led_work(struct work_struct *work) +{ + struct pca963x_led *pca963x = container_of(work, + struct pca963x_led, work); + u8 ledout_addr = pca963x->chip->chipdef->ledout_base + + (pca963x->led_num / 4); + u8 ledout; + int shift = 2 * (pca963x->led_num % 4); + u8 mask = 0x3 << shift; + + mutex_lock(&pca963x->chip->mutex); + ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr); + switch (pca963x->brightness) { + case LED_FULL: + i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr, + (ledout & ~mask) | (PCA963X_LED_ON << shift)); + break; + case LED_OFF: + i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr, + ledout & ~mask); + break; + default: + i2c_smbus_write_byte_data(pca963x->chip->client, + PCA963X_PWM_BASE + pca963x->led_num, + pca963x->brightness); + i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr, + (ledout & ~mask) | (PCA963X_LED_PWM << shift)); + break; + } + mutex_unlock(&pca963x->chip->mutex); +} + +static void pca963x_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct pca963x_led *pca963x; + + pca963x = container_of(led_cdev, struct pca963x_led, led_cdev); + + pca963x->brightness = value; + + /* + * Must use workqueue for the actual I/O since I2C operations + * can sleep. + */ + schedule_work(&pca963x->work); +} + +static int pca963x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pca963x *pca963x_chip; + struct pca963x_led *pca963x; + struct pca963x_platform_data *pdata; + struct pca963x_chipdef *chip; + int i, err; + + chip = &pca963x_chipdefs[id->driver_data]; + pdata = client->dev.platform_data; + + if (pdata && (pdata->leds.num_leds < 1 || + pdata->leds.num_leds > chip->n_leds)) { + dev_err(&client->dev, "board info must claim 1-%d LEDs", + chip->n_leds); + return -EINVAL; + } + + pca963x_chip = devm_kzalloc(&client->dev, sizeof(*pca963x_chip), + GFP_KERNEL); + if (!pca963x_chip) + return -ENOMEM; + pca963x = devm_kzalloc(&client->dev, chip->n_leds * sizeof(*pca963x), + GFP_KERNEL); + if (!pca963x) + return -ENOMEM; + + i2c_set_clientdata(client, pca963x_chip); + + mutex_init(&pca963x_chip->mutex); + pca963x_chip->chipdef = chip; + pca963x_chip->client = client; + pca963x_chip->leds = pca963x; + + /* Turn off LEDs by default*/ + i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00); + if (chip->n_leds > 4) + i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00); + + for (i = 0; i < chip->n_leds; i++) { + pca963x[i].led_num = i; + pca963x[i].chip = pca963x_chip; + + /* Platform data can specify LED names and default triggers */ + if (pdata && i < pdata->leds.num_leds) { + if (pdata->leds.leds[i].name) + snprintf(pca963x[i].name, + sizeof(pca963x[i].name), "pca963x:%s", + pdata->leds.leds[i].name); + if (pdata->leds.leds[i].default_trigger) + pca963x[i].led_cdev.default_trigger = + pdata->leds.leds[i].default_trigger; + } + if (!pdata || i >= pdata->leds.num_leds || + !pdata->leds.leds[i].name) + snprintf(pca963x[i].name, sizeof(pca963x[i].name), + "pca963x:%d:%.2x:%d", client->adapter->nr, + client->addr, i); + + pca963x[i].led_cdev.name = pca963x[i].name; + pca963x[i].led_cdev.brightness_set = pca963x_led_set; + + INIT_WORK(&pca963x[i].work, pca963x_led_work); + + err = led_classdev_register(&client->dev, &pca963x[i].led_cdev); + if (err < 0) + goto exit; + } + + /* Disable LED all-call address and set normal mode */ + i2c_smbus_write_byte_data(client, PCA963X_MODE1, 0x00); + + /* Configure output: open-drain or totem pole (push-pull) */ + if (pdata && pdata->outdrv == PCA963X_OPEN_DRAIN) + i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01); + + return 0; + +exit: + while (i--) { + led_classdev_unregister(&pca963x[i].led_cdev); + cancel_work_sync(&pca963x[i].work); + } + + return err; +} + +static int pca963x_remove(struct i2c_client *client) +{ + struct pca963x *pca963x = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pca963x->chipdef->n_leds; i++) { + led_classdev_unregister(&pca963x->leds[i].led_cdev); + cancel_work_sync(&pca963x->leds[i].work); + } + + return 0; +} + +static struct i2c_driver pca963x_driver = { + .driver = { + .name = "leds-pca963x", + .owner = THIS_MODULE, + }, + .probe = pca963x_probe, + .remove = pca963x_remove, + .id_table = pca963x_id, +}; + +module_i2c_driver(pca963x_driver); + +MODULE_AUTHOR("Peter Meerwald <[email protected]>"); +MODULE_DESCRIPTION("PCA963X LED driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/platform_data/leds-pca9633.h b/include/linux/platform_data/leds-pca9633.h deleted file mode 100644 index c5bf29b..0000000 --- a/include/linux/platform_data/leds-pca9633.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * PCA9633 LED chip driver. - * - * Copyright 2012 bct electronic GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef __LINUX_PCA9633_H -#define __LINUX_PCA9633_H -#include <linux/leds.h> - -enum pca9633_outdrv { - PCA9633_OPEN_DRAIN, - PCA9633_TOTEM_POLE, /* aka push-pull */ -}; - -struct pca9633_platform_data { - struct led_platform_data leds; - enum pca9633_outdrv outdrv; -}; - -#endif /* __LINUX_PCA9633_H*/ diff --git a/include/linux/platform_data/leds-pca963x.h b/include/linux/platform_data/leds-pca963x.h new file mode 100644 index 0000000..f2d527d --- /dev/null +++ b/include/linux/platform_data/leds-pca963x.h @@ -0,0 +1,36 @@ +/* + * PCA963X LED chip driver. + * + * Copyright 2012 bct electronic GmbH + * Copyright 2013 Qtechnology A/S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_PCA963X_H +#define __LINUX_PCA963X_H +#include <linux/leds.h> + +enum pca963x_outdrv { + PCA963X_OPEN_DRAIN, + PCA963X_TOTEM_POLE, /* aka push-pull */ +}; + +struct pca963x_platform_data { + struct led_platform_data leds; + enum pca963x_outdrv outdrv; +}; + +#endif /* __LINUX_PCA963X_H*/ -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
