3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.este...@freescale.com>

commit d6e102f498cbcc8dd2e36721a01213f036397112 upstream.

Recently we have been seing some reports about PIO mode not working properly.

- http://www.spinics.net/lists/linux-i2c/msg11985.html
- http://marc.info/?l=linux-i2c&m=137235593101385&w=2
- https://lkml.org/lkml/2013/6/24/430

Let's use DMA mode even for small transfers.

Without this patch, i2c reads the incorrect sgtl5000 version on a mx28evk when
touchscreen is enabled:

[    5.856270] sgtl5000 0-000a: Device with ID register 0 is not a sgtl5000
[    9.877307] sgtl5000 0-000a: ASoC: failed to probe CODEC -19
[    9.883528] mxs-sgtl5000 sound.12: ASoC: failed to instantiate card -19
[    9.892955] mxs-sgtl5000 sound.12: snd_soc_register_card failed (-19)

[wsa: we have a proper solution for -next, so this non intrusive
solution is OK for now]

Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
Acked-by: Shawn Guo <shawn....@linaro.org>
Acked-by: Lucas Stach <l.st...@pengutronix.de>
Acked-by: Marek Vasut <ma...@denx.de>
Signed-off-by: Wolfram Sang <w...@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>

---
 drivers/i2c/busses/i2c-mxs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -494,7 +494,7 @@ static int mxs_i2c_xfer_msg(struct i2c_a
         * based on this empirical measurement and a lot of previous frobbing.
         */
        i2c->cmd_err = 0;
-       if (msg->len < 8) {
+       if (0) {        /* disable PIO mode until a proper fix is made */
                ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
                if (ret)
                        mxs_i2c_reset(i2c);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to