On Sat, Aug 17, 2013 at 08:02:34PM -0700, Josh Triplett wrote:
> On Sat, Aug 17, 2013 at 06:49:39PM -0700, Paul E. McKenney wrote:
> > From: "Paul E. McKenney" <[email protected]>
> >
> > This commit adds fields to the rcu_dyntick structure that are used to
> > detect idle CPUs. These new fields differ from the existing ones in
> > that the existing ones consider a CPU executing in user mode to be idle,
> > where the new ones consider CPUs executing in user mode to be busy.
> > The handling of these new fields is otherwise quite similar to that for
> > the exiting fields. This commit also adds the initialization required
> > for these fields.
> >
> > So, why is usermode execution treated differently, with RCU considering
> > it a quiescent state equivalent to idle, while in contrast the new
> > full-system idle state detection considers usermode execution to be
> > non-idle?
> >
> > It turns out that although one of RCU's quiescent states is usermode
> > execution, it is not a full-system idle state. This is because the
> > purpose of the full-system idle state is not RCU, but rather determining
> > when accurate timekeeping can safely be disabled. Whenever accurate
> > timekeeping is required in a CONFIG_NO_HZ_FULL kernel, at least one
> > CPU must keep the scheduling-clock tick going. If even one CPU is
> > executing in user mode, accurate timekeeping is requires, particularly for
> > architectures where gettimeofday() and friends do not enter the kernel.
> > Only when all CPUs are really and truly idle can accurate timekeeping be
> > disabled, allowing all CPUs to turn off the scheduling clock interrupt,
> > thus greatly improving energy efficiency.
> >
> > This naturally raises the question "Why is this code in RCU rather than in
> > timekeeping?", and the answer is that RCU has the data and infrastructure
> > to efficiently make this determination.
> >
> > Signed-off-by: Paul E. McKenney <[email protected]>
> > Acked-by: Frederic Weisbecker <[email protected]>
> > Cc: Steven Rostedt <[email protected]>
>
> One comment below. With that change:
> Reviewed-by: Josh Triplett <[email protected]>
>
> > +#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
> > +
> > +/*
> > + * Initialize dynticks sysidle state for CPUs coming online.
> > + */
> > +static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp)
> > +{
> > + rdtp->dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE;
> > +}
> > +
> > +#else /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
> > +
> > +static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp)
> > +{
> > +}
> > +
> > +#endif /* #else #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
>
> Just move the ifdef around the function body:
>
> static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp)
> {
> #ifdef CONFIG_NO_HZ_FULL_SYSIDLE
> rdtp->dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE;
> #endif /* CONFIG_NO_HZ_FULL_SYSIDLE */
> }
This makes sense for this isolated function, and it would also
make sense if the end result had only functions that were exported.
But if I try to apply this to the result, I will end up with something
like the following. Is that really what you want?
I suppose I could individually enclose whole functions whose definitions
are unneeded for CONFIG_NO_HZ_FULL_SYSIDLE=n, but that doesn't seem
helpful either.
Thoughts?
Thanx, Paul
/*
* Invoked to note exit from irq or task transition to idle. Note that
* usermode execution does -not- count as idle here! After all, we want
* to detect full-system idle states, not RCU quiescent states and grace
* periods. The caller must have disabled interrupts.
*/
static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq)
{
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
unsigned long j;
/* Adjust nesting, check for fully idle. */
if (irq) {
rdtp->dynticks_idle_nesting--;
WARN_ON_ONCE(rdtp->dynticks_idle_nesting < 0);
if (rdtp->dynticks_idle_nesting != 0)
return; /* Still not fully idle. */
} else {
if ((rdtp->dynticks_idle_nesting & DYNTICK_TASK_NEST_MASK) ==
DYNTICK_TASK_NEST_VALUE) {
rdtp->dynticks_idle_nesting = 0;
} else {
rdtp->dynticks_idle_nesting -= DYNTICK_TASK_NEST_VALUE;
WARN_ON_ONCE(rdtp->dynticks_idle_nesting < 0);
return; /* Still not fully idle. */
}
}
/* Record start of fully idle period. */
j = jiffies;
ACCESS_ONCE(rdtp->dynticks_idle_jiffies) = j;
smp_mb__before_atomic_inc();
atomic_inc(&rdtp->dynticks_idle);
smp_mb__after_atomic_inc();
WARN_ON_ONCE(atomic_read(&rdtp->dynticks_idle) & 0x1);
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
}
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
/*
* Unconditionally force exit from full system-idle state. This is
* invoked when a normal CPU exits idle, but must be called separately
* for the timekeeping CPU (tick_do_timer_cpu). The reason for this
* is that the timekeeping CPU is permitted to take scheduling-clock
* interrupts while the system is in system-idle state, and of course
* rcu_sysidle_exit() has no way of distinguishing a scheduling-clock
* interrupt from any other type of interrupt.
*/
void rcu_sysidle_force_exit(void)
{
int oldstate = ACCESS_ONCE(full_sysidle_state);
int newoldstate;
/*
* Each pass through the following loop attempts to exit full
* system-idle state. If contention proves to be a problem,
* a trylock-based contention tree could be used here.
*/
while (oldstate > RCU_SYSIDLE_SHORT) {
newoldstate = cmpxchg(&full_sysidle_state,
oldstate, RCU_SYSIDLE_NOT);
if (oldstate == newoldstate &&
oldstate == RCU_SYSIDLE_FULL_NOTED) {
rcu_kick_nohz_cpu(tick_do_timer_cpu);
return; /* We cleared it, done! */
}
oldstate = newoldstate;
}
smp_mb(); /* Order initial oldstate fetch vs. later non-idle work. */
}
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
/*
* Invoked to note entry to irq or task transition from idle. Note that
* usermode execution does -not- count as idle here! The caller must
* have disabled interrupts.
*/
static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq)
{
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
/* Adjust nesting, check for already non-idle. */
if (irq) {
rdtp->dynticks_idle_nesting++;
WARN_ON_ONCE(rdtp->dynticks_idle_nesting <= 0);
if (rdtp->dynticks_idle_nesting != 1)
return; /* Already non-idle. */
} else {
/*
* Allow for irq misnesting. Yes, it really is possible
* to enter an irq handler then never leave it, and maybe
* also vice versa. Handle both possibilities.
*/
if (rdtp->dynticks_idle_nesting & DYNTICK_TASK_NEST_MASK) {
rdtp->dynticks_idle_nesting += DYNTICK_TASK_NEST_VALUE;
WARN_ON_ONCE(rdtp->dynticks_idle_nesting <= 0);
return; /* Already non-idle. */
} else {
rdtp->dynticks_idle_nesting = DYNTICK_TASK_EXIT_IDLE;
}
}
/* Record end of idle period. */
smp_mb__before_atomic_inc();
atomic_inc(&rdtp->dynticks_idle);
smp_mb__after_atomic_inc();
WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks_idle) & 0x1));
/*
* If we are the timekeeping CPU, we are permitted to be non-idle
* during a system-idle state. This must be the case, because
* the timekeeping CPU has to take scheduling-clock interrupts
* during the time that the system is transitioning to full
* system-idle state. This means that the timekeeping CPU must
* invoke rcu_sysidle_force_exit() directly if it does anything
* more than take a scheduling-clock interrupt.
*/
if (smp_processor_id() == tick_do_timer_cpu)
return;
/* Update system-idle state: We are clearly no longer fully idle! */
rcu_sysidle_force_exit();
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
}
/*
* Check to see if the current CPU is idle. Note that usermode execution
* does not count as idle. The caller must have disabled interrupts.
*/
static void rcu_sysidle_check_cpu(struct rcu_data *rdp, bool *isidle,
unsigned long *maxj)
{
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
int cur;
unsigned long j;
struct rcu_dynticks *rdtp = rdp->dynticks;
/*
* If some other CPU has already reported non-idle, if this is
* not the flavor of RCU that tracks sysidle state, or if this
* is an offline or the timekeeping CPU, nothing to do.
*/
if (!*isidle || rdp->rsp != rcu_sysidle_state ||
cpu_is_offline(rdp->cpu) || rdp->cpu == tick_do_timer_cpu)
return;
if (rcu_gp_in_progress(rdp->rsp))
WARN_ON_ONCE(smp_processor_id() != tick_do_timer_cpu);
/* Pick up current idle and NMI-nesting counter and check. */
cur = atomic_read(&rdtp->dynticks_idle);
if (cur & 0x1) {
*isidle = false; /* We are not idle! */
return;
}
smp_mb(); /* Read counters before timestamps. */
/* Pick up timestamps. */
j = ACCESS_ONCE(rdtp->dynticks_idle_jiffies);
/* If this CPU entered idle more recently, update maxj timestamp. */
if (ULONG_CMP_LT(*maxj, j))
*maxj = j;
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
}
/*
* Is this the flavor of RCU that is handling full-system idle?
*/
static bool is_sysidle_rcu_state(struct rcu_state *rsp)
{
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
return rsp == rcu_sysidle_state;
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
}
/*
* Bind the grace-period kthread for the sysidle flavor of RCU to the
* timekeeping CPU.
*/
static void rcu_bind_gp_kthread(void)
{
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
int cpu = ACCESS_ONCE(tick_do_timer_cpu);
if (cpu < 0 || cpu >= nr_cpu_ids)
return;
if (raw_smp_processor_id() != cpu)
set_cpus_allowed_ptr(current, cpumask_of(cpu));
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
}
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
/*
* Return a delay in jiffies based on the number of CPUs, rcu_node
* leaf fanout, and jiffies tick rate. The idea is to allow larger
* systems more time to transition to full-idle state in order to
* avoid the cache thrashing that otherwise occur on the state variable.
* Really small systems (less than a couple of tens of CPUs) should
* instead use a single global atomically incremented counter, and later
* versions of this will automatically reconfigure themselves accordingly.
*/
static unsigned long rcu_sysidle_delay(void)
{
if (nr_cpu_ids <= RCU_SYSIDLE_SMALL)
return 0;
return DIV_ROUND_UP(nr_cpu_ids * HZ, rcu_fanout_leaf * 1000);
}
/*
* Advance the full-system-idle state. This is invoked when all of
* the non-timekeeping CPUs are idle.
*/
static void rcu_sysidle(unsigned long j)
{
/* Check the current state. */
switch (ACCESS_ONCE(full_sysidle_state)) {
case RCU_SYSIDLE_NOT:
/* First time all are idle, so note a short idle period. */
ACCESS_ONCE(full_sysidle_state) = RCU_SYSIDLE_SHORT;
break;
case RCU_SYSIDLE_SHORT:
/*
* Idle for a bit, time to advance to next state?
* cmpxchg failure means race with non-idle, let them win.
*/
if (ULONG_CMP_GE(jiffies, j + rcu_sysidle_delay()))
(void)cmpxchg(&full_sysidle_state,
RCU_SYSIDLE_SHORT, RCU_SYSIDLE_LONG);
break;
case RCU_SYSIDLE_LONG:
/*
* Do an additional check pass before advancing to full.
* cmpxchg failure means race with non-idle, let them win.
*/
if (ULONG_CMP_GE(jiffies, j + rcu_sysidle_delay()))
(void)cmpxchg(&full_sysidle_state,
RCU_SYSIDLE_LONG, RCU_SYSIDLE_FULL);
break;
default:
break;
}
}
/*
* Found a non-idle non-timekeeping CPU, so kick the system-idle state
* back to the beginning.
*/
static void rcu_sysidle_cancel(void)
{
smp_mb();
ACCESS_ONCE(full_sysidle_state) = RCU_SYSIDLE_NOT;
}
/*
* Update the sysidle state based on the results of a force-quiescent-state
* scan of the CPUs' dyntick-idle state.
*/
static void rcu_sysidle_report(struct rcu_state *rsp, int isidle,
unsigned long maxj, bool gpkt)
{
if (rsp != rcu_sysidle_state)
return; /* Wrong flavor, ignore. */
if (isidle) {
if (gpkt && nr_cpu_ids > RCU_SYSIDLE_SMALL)
rcu_sysidle(maxj); /* More idle! */
} else {
rcu_sysidle_cancel(); /* Idle is over. */
}
}
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
static void rcu_sysidle_report_gp(struct rcu_state *rsp, int isidle,
unsigned long maxj)
{
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
rcu_sysidle_report(rsp, isidle, maxj, true);
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
}
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
/* Callback and function for forcing an RCU grace period. */
struct rcu_sysidle_head {
struct rcu_head rh;
int inuse;
};
static void rcu_sysidle_cb(struct rcu_head *rhp)
{
struct rcu_sysidle_head *rshp;
smp_mb(); /* grace period precedes setting inuse. */
rshp = container_of(rhp, struct rcu_sysidle_head, rh);
ACCESS_ONCE(rshp->inuse) = 0;
}
/*
* Check to see if the system is fully idle, other than the timekeeping CPU.
* The caller must have disabled interrupts.
*/
bool rcu_sys_is_idle(void)
{
static struct rcu_sysidle_head rsh;
int rss = ACCESS_ONCE(full_sysidle_state);
if (WARN_ON_ONCE(smp_processor_id() != tick_do_timer_cpu))
return false;
/* Handle small-system case by doing a full scan of CPUs. */
if (nr_cpu_ids <= RCU_SYSIDLE_SMALL) {
int oldrss = rss - 1;
/*
* One pass to advance to each state up to _FULL.
* Give up if any pass fails to advance the state.
*/
while (rss < RCU_SYSIDLE_FULL && oldrss < rss) {
int cpu;
bool isidle = true;
unsigned long maxj = jiffies - ULONG_MAX / 4;
struct rcu_data *rdp;
/* Scan all the CPUs looking for nonidle CPUs. */
for_each_possible_cpu(cpu) {
rdp = per_cpu_ptr(rcu_sysidle_state->rda, cpu);
rcu_sysidle_check_cpu(rdp, &isidle, &maxj);
if (!isidle)
break;
}
rcu_sysidle_report(rcu_sysidle_state,
isidle, maxj, false);
oldrss = rss;
rss = ACCESS_ONCE(full_sysidle_state);
}
}
/* If this is the first observation of an idle period, record it. */
if (rss == RCU_SYSIDLE_FULL) {
rss = cmpxchg(&full_sysidle_state,
RCU_SYSIDLE_FULL, RCU_SYSIDLE_FULL_NOTED);
return rss == RCU_SYSIDLE_FULL;
}
smp_mb(); /* ensure rss load happens before later caller actions. */
/* If already fully idle, tell the caller (in case of races). */
if (rss == RCU_SYSIDLE_FULL_NOTED)
return true;
/*
* If we aren't there yet, and a grace period is not in flight,
* initiate a grace period. Either way, tell the caller that
* we are not there yet.
*/
if (nr_cpu_ids > RCU_SYSIDLE_SMALL &&
!rcu_gp_in_progress(rcu_sysidle_state) &&
!rsh.inuse && xchg(&rsh.inuse, 1) == 0)
call_rcu(&rsh.rh, rcu_sysidle_cb);
return false;
}
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
/*
* Initialize dynticks sysidle state for CPUs coming online.
*/
static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp)
{
#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
rdtp->dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE;
#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
}
#else /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq)
{
}
static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq)
{
}
static void rcu_sysidle_check_cpu(struct rcu_data *rdp, bool *isidle,
unsigned long *maxj)
{
}
static bool is_sysidle_rcu_state(struct rcu_state *rsp)
{
return false;
}
static void rcu_bind_gp_kthread(void)
{
}
static void rcu_sysidle_report_gp(struct rcu_state *rsp, int isidle,
unsigned long maxj)
{
}
static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp)
{
}
#endif /* #else #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
