3.2.51-rc1 review patch. If anyone has any objections, please let me know.
------------------ From: Oleksij Rempel <li...@rempel-privat.de> commit dc2a87f519a4d8cb376ab54f22b6b98a943b51ce upstream. Currently we configure harwdare and clock, only after interface start. In this case, if we reload module or reboot PC without configuring adapter, firmware will freeze. There is no software way to reset adpter. This patch add initial configuration and set it in disabled state, to avoid this freeze. Behaviour of this patch should be similar to: ifconfig wlan0 up; ifconfig wlan0 down. Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1 Tested-by: Bo Shi <cnsh...@gmail.com> Signed-off-by: Oleksij Rempel <li...@rempel-privat.de> Signed-off-by: John W. Linville <linvi...@tuxdriver.com> Signed-off-by: Ben Hutchings <b...@decadent.org.uk> --- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -851,6 +851,7 @@ static int ath9k_init_device(struct ath9 if (error != 0) goto err_rx; + ath9k_hw_disable(priv->ah); #ifdef CONFIG_MAC80211_LEDS /* must be initialized before ieee80211_register_hw */ priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw, -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
