On 09/01/13 12:17, Zubair Lutfullah wrote:
> Enable shared IRQ to allow ADC to share IRQ line from
> parent MFD core. Only FIFO0 IRQs are for TSC and handled
> on the TSC side.
> 
> Step mask would be updated from cached variable only previously.
> In rare cases when both TSC and ADC are used, the cached
> variable gets mixed up.
> The step mask is written with the required mask every time.
> 
> Rachna Patil (TI) laid ground work for shared IRQ.
> 
> Signed-off-by: Zubair Lutfullah <zubair.lutful...@gmail.com>
Whilst I would have prefered an mfd under these drivers and elegant handling
of the interrupts, I guess if this works it is at least not terribly invasive.

However, this does need an Ack from Dmitry before I can take it (or for
Dmitry to take it himself?)

> ---
>  drivers/input/touchscreen/ti_am335x_tsc.c |   12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c 
> b/drivers/input/touchscreen/ti_am335x_tsc.c
> index e1c5300..24e625c 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -52,6 +52,7 @@ struct titsc {
>       u32                     config_inp[4];
>       u32                     bit_xp, bit_xn, bit_yp, bit_yn;
>       u32                     inp_xp, inp_xn, inp_yp, inp_yn;
> +     u32                     step_mask;
>  };
>  
>  static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
> @@ -196,7 +197,8 @@ static void titsc_step_config(struct titsc *ts_dev)
>  
>       /* The steps1 … end and bit 0 for TS_Charge */
>       stepenable = (1 << (end_step + 2)) - 1;
> -     am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);
> +     ts_dev->step_mask = stepenable;
> +     am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask);
>  }
>  
>  static void titsc_read_coordinates(struct titsc *ts_dev,
> @@ -260,6 +262,10 @@ static irqreturn_t titsc_irq(int irq, void *dev)
>       unsigned int fsm;
>  
>       status = titsc_readl(ts_dev, REG_IRQSTATUS);
> +     /*
> +      * ADC and touchscreen share the IRQ line.
> +      * FIFO1 interrupts are used by ADC. Handle FIFO0 IRQs here only
> +      */
>       if (status & IRQENB_FIFO0THRES) {
>  
>               titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
> @@ -316,7 +322,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
>  
>       if (irqclr) {
>               titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
> -             am335x_tsc_se_update(ts_dev->mfd_tscadc);
> +             am335x_tsc_se_set(ts_dev->mfd_tscadc, ts_dev->step_mask);
>               return IRQ_HANDLED;
>       }
>       return IRQ_NONE;
> @@ -389,7 +395,7 @@ static int titsc_probe(struct platform_device *pdev)
>       }
>  
>       err = request_irq(ts_dev->irq, titsc_irq,
> -                       0, pdev->dev.driver->name, ts_dev);
> +                       IRQF_SHARED, pdev->dev.driver->name, ts_dev);
>       if (err) {
>               dev_err(&pdev->dev, "failed to allocate irq.\n");
>               goto err_free_mem;
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to