If given rail has the single voltage (n_voltages = 1) then provide the
rail voltage through regulator descriptor so that core can use this
value for finding voltage.

This will avoid the implementation of the callback for get_voltage() or
list_voltage() callback on regulator driver.

Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com>
---
 drivers/regulator/core.c         |    5 ++++-
 include/linux/regulator/driver.h |    2 ++
 2 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a01b8b3..abc899e 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2489,6 +2489,8 @@ static int _regulator_get_voltage(struct regulator_dev 
*rdev)
                ret = rdev->desc->ops->get_voltage(rdev);
        } else if (rdev->desc->ops->list_voltage) {
                ret = rdev->desc->ops->list_voltage(rdev, 0);
+       } else if (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1)) {
+               ret = rdev->desc->fixed_uV;
        } else {
                return -EINVAL;
        }
@@ -3170,7 +3172,8 @@ static int add_regulator_attributes(struct regulator_dev 
*rdev)
        /* some attributes need specific methods to be displayed */
        if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
            (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) ||
-           (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0)) {
+           (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) ||
+               (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1))) {
                status = device_create_file(dev, &dev_attr_microvolts);
                if (status < 0)
                        return status;
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 67e13aa..9e8241a 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -207,6 +207,7 @@ enum regulator_type {
  * @min_uV: Voltage given by the lowest selector (if linear mapping)
  * @uV_step: Voltage increase with each selector (if linear mapping)
  * @linear_min_sel: Minimal selector for starting linear mapping
+ * @fixed_uV: Fixed voltage of rails.
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
  * @volt_table: Voltage mapping table (if table based mapping)
  *
@@ -239,6 +240,7 @@ struct regulator_desc {
        unsigned int min_uV;
        unsigned int uV_step;
        unsigned int linear_min_sel;
+       int fixed_uV;
        unsigned int ramp_delay;
 
        const struct regulator_linear_range *linear_ranges;
-- 
1.7.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to