On 09/10/13 13:49, Lee Jones wrote:
> Some chips either don't support it or fail to provide adequate documentation,
> so sometimes it's impossible to enable the feature even if it is supported.
>
> Signed-off-by: Lee Jones <lee.jo...@linaro.org>
Applied to the togreg branch of iio.git
Thanks
> ---
> drivers/iio/common/st_sensors/st_sensors_core.c | 11 +++++++----
> drivers/iio/pressure/st_pressure_core.c | 6 ++++--
> 2 files changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c
> b/drivers/iio/common/st_sensors/st_sensors_core.c
> index 965ee22..eb261a5 100644
> --- a/drivers/iio/common/st_sensors/st_sensors_core.c
> +++ b/drivers/iio/common/st_sensors/st_sensors_core.c
> @@ -235,10 +235,13 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
> if (err < 0)
> goto init_error;
>
> - err = st_sensors_set_fullscale(indio_dev,
> - sdata->current_fullscale->num);
> - if (err < 0)
> - goto init_error;
> + if (sdata->current_fullscale) {
> + err = st_sensors_set_fullscale(indio_dev,
> + sdata->current_fullscale->num);
> + if (err < 0)
> + goto init_error;
> + } else
> + dev_info(&indio_dev->dev, "Full-scale not possible\n");
>
> err = st_sensors_set_odr(indio_dev, sdata->odr);
> if (err < 0)
> diff --git a/drivers/iio/pressure/st_pressure_core.c
> b/drivers/iio/pressure/st_pressure_core.c
> index ceebd3c..16cfbc5 100644
> --- a/drivers/iio/pressure/st_pressure_core.c
> +++ b/drivers/iio/pressure/st_pressure_core.c
> @@ -226,8 +226,10 @@ int st_press_common_probe(struct iio_dev *indio_dev,
> indio_dev->channels = pdata->sensor->ch;
> indio_dev->num_channels = ARRAY_SIZE(st_press_channels);
>
> - pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
> - &pdata->sensor->fs.fs_avl[0];
> + if (pdata->sensor->fs.addr != 0)
> + pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
> + &pdata->sensor->fs.fs_avl[0];
> +
> pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
>
> if (!plat_data)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
