Hi Lee,

On 09/18/2013 01:40 PM, Lee Jones wrote:
> On Wed, 18 Sep 2013, Maxime COQUELIN wrote:
>
>> This patch supplies I2C configuration to B2000 and B2020
>> based on either STiH415 or STiH416 SoCs.
>>
>> Cc: Srinivas Kandagatla <srinivas.kandaga...@st.com>
>> Signed-off-by: Maxime Coquelin <maxime.coque...@st.com>
>> ---
>>  arch/arm/boot/dts/stih41x-b2000.dtsi |    7 +++++++
>>  arch/arm/boot/dts/stih41x-b2020.dtsi |   20 ++++++++++++++++++++
>>  2 files changed, 27 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi 
>> b/arch/arm/boot/dts/stih41x-b2000.dtsi
>> index 8e694d2..346cc4bc 100644
>> --- a/arch/arm/boot/dts/stih41x-b2000.dtsi
>> +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
>> @@ -37,5 +37,12 @@
>>                      };
>>              };
>>  
>> +            /* HDMI Tx I2C */
>> +            i2c1: i2c@fed41000{
> nit: Space before the '{'
Ok. It will be fixed for all nodes in next series.
>
>> +                    status = "okay";
> Consider enabling the node at the bottom.
>
>> +
>> +                    /* HDMI V1.3a supports Standard mode only */
>> +                    clock-frequency = <100000>;
>> +            };
>>      };
>>  };
>> diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi 
>> b/arch/arm/boot/dts/stih41x-b2020.dtsi
>> index 133e181..10b98da 100644
>> --- a/arch/arm/boot/dts/stih41x-b2020.dtsi
>> +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
>> @@ -38,5 +38,25 @@
>>                              default-state = "off";
>>                      };
>>              };
>> +
>> +            i2c0: i2c@fed40000{
> As above.
>
>> +                    status = "okay";
>> +            };
>> +
>> +            /* HDMI Tx I2C */
>> +            i2c1: i2c@fed41000{
> As above.
>
>> +                    status = "okay";
> As above.
>
>> +                    /* HDMI V1.3a supports Standard mode only */
>> +                    clock-frequency = <100000>;
>> +            };
>> +
>> +            sbc_i2c0: i2c@fe540000{
> As above.
>
>> +                    status = "okay";
>> +            };
>> +
>> +            sbc_i2c1: i2c@fe541000{
> Are these nodes referenced by phandle at all?
>
> If not, consider dropping the <lable>:s
It was references in an previous internal version of this series.
This is no more the case, so I will drop the labels.
>
>> +                    status = "okay";
>> +            };
>>      };
>>  };
> Odd tabbing here.
>
Thanks,
Maxime
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to