Hello, Ondrej.
On Fri, Sep 13, 2013 at 11:44:27PM +0200, Ondrej Zary wrote:
> This is caused by skipping ata_sff_softreset() when ap->ioaddr.ctl_addr is
> unset so ata_devchk() is never called. This patch seems to fix the problem.
> Is it OK or can it cause more problems?
>
> --- a/drivers/ata/libata-sff.c
> +++ b/drivers/ata/libata-sff.c
> @@ -2008,13 +2008,15 @@ static int ata_bus_softreset(struct ata_port *ap,
> unsigned int devmask,
>
> DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
>
> - /* software reset. causes dev0 to be selected */
> - iowrite8(ap->ctl, ioaddr->ctl_addr);
> - udelay(20); /* FIXME: flush */
> - iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
> - udelay(20); /* FIXME: flush */
> - iowrite8(ap->ctl, ioaddr->ctl_addr);
> - ap->last_ctl = ap->ctl;
> + if (ap->ioaddr.ctl_addr) {
> + /* software reset. causes dev0 to be selected */
> + iowrite8(ap->ctl, ioaddr->ctl_addr);
> + udelay(20); /* FIXME: flush */
> + iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
> + udelay(20); /* FIXME: flush */
> + iowrite8(ap->ctl, ioaddr->ctl_addr);
> + ap->last_ctl = ap->ctl;
> + }
>
> /* wait the port to become ready */
> return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
> @@ -2215,10 +2217,6 @@ void ata_sff_error_handler(struct ata_port *ap)
>
> spin_unlock_irqrestore(ap->lock, flags);
>
> - /* ignore ata_sff_softreset if ctl isn't accessible */
> - if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
> - softreset = NULL;
> -
> /* ignore built-in hardresets if SCR access is not available */
> if ((hardreset == sata_std_hardreset ||
> hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link))
Hmm... I'm unsure what to do with these patches. It's a mostly dead
driver, so I don't wanna mess with it too much unless it's an obvious
fix. What hardware are you playing with?
Thanks.
--
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
