Trying to use an AIC7890 SCSI controller with kernel 2.4.5 I have
the problem reported into the attached log files. Same problems with
kernel 2.4.3. Kernels below 2.4 doesn't even see it. In MS Windows 95
it works without any problems. I used 3 variations of SCSI controllers
built upon AIC7890, so I don't think all 3 are bad. One was made for
Compaq and two for Dell. The AIC7890 is around since a while so that's
the problem with Linux in corp. computing. It's great but cannot use
it.
I Couldn't send this bug report directly to the author of the
driver, Justin T. Gibbs, because there is no e-mail address provided.
If you need further details please, let me know. Same if you need a
sample controller for your tests.
If you fix the problem, please, let me know. Maybe next time we may
be really able to use your OS.
Thank you very much and my best regards
--
Mihai Gata
[EMAIL PROTECTED]
IS Manager @ Mill-Rose Company
Member of The Institute of Electrical and Electronics Engineers
Member of The Association for Computing Machinery
Linux version 2.4.5-Mihai-1 (root@mr-test-1) (gcc version 2.96 20000731
(Linux-Mandrake 8.0 2.96-0.48mdk)) #4 Sun Jun 17 05:00:08 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
Scan SMP from c009fc00 for 4096 bytes.
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
mapped APIC to ffffe000 (01111000)
Kernel command line:
Initializing CPU#0
Detected 451.030 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 897.84 BogoMIPS
Memory: 61796k/65536k available (1239k kernel code, 3352k reserved, 467k data, 240k
init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
CPU: Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D+ Processor stepping 01
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Disabled enhanced CPU to PCI posting #2
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x3f0 key=0x87 devid=fc devrev=21 oldid=8c
Winbond chip type 83877TF
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 16
0x378: readIntrThreshold is 16
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x4b
0x378: ECP settings irq=7 dma=3
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
block: queued sectors max/low 40978kB/13659kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC36400L, ATA DISK drive
hdb: CD-540E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 12594960 sectors (6449 MB) w/256KiB Cache, CHS=784/255/63, UDMA(33)
hdb: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED])
Last modified Nov 1, 2000 by Paul Gortmaker
NE*000 ethercard probe at 0x340: 00 40 05 5a be 13
eth0: NE2000 found at 0x340, using IRQ 11.
PPP generic driver version 2.4.1
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 28M
agpgart: Detected Via MVP3 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
[drm] AGP 0.99 on VIA MVP3 @ 0xd8000000 64MB
[drm] Initialized r128 2.1.2 20001215 on minor 63
SCSI subsystem driver Revision: 1.00
PCI: Assigned IRQ 3 for device 00:0b.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.13
<Adaptec 2940 Ultra2 SCSI adapter>
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
Vendor: SEAGATE Model: ST318416N Rev: 0010
Type: Direct-Access ANSI SCSI revision: 03
Vendor: YAMAHA Model: CRW8824S Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
scsi0:0:0:0: Tagged Queuing enabled. Depth 253
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 31)
SCSI device sda: 35885168 512-byte hdwr sectors (18373 MB)
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0
(scsi0:A:3): 20.000MB/s transfers (20.000MHz, offset 15)
sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
(scsi0:A:5): 20.000MB/s transfers (20.000MHz, offset 15)
sr2: scsi-1 drive
Creative EMU10K1 PCI Audio Driver, version 0.7, 04:45:36 Jun 17 2001
PCI: Found IRQ 10 for device 00:09.0
emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xd800-0xd81f, IRQ 10
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 240k freed
Adding Swap: 771112k swap-space (priority -1)
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
scsi0: PCI error Interrupt at seqaddr = 0x9
scsi0: Data Parity Error Detected during address or write data phase
scsi0: PCI error Interrupt at seqaddr = 0x8
scsi0: Data Parity Error Detected during address or write data phase
scsi0: PCI error Interrupt at seqaddr = 0x9
scsi0: Data Parity Error Detected during address or write data phase
VFS: freeing iocharset=iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
scsi0: PCI error Interrupt at seqaddr = 0x9
scsi0: Data Parity Error Detected during address or write data phase
scsi0: PCI error Interrupt at seqaddr = 0x9
scsi0: Data Parity Error Detected during address or write data phase
VFS: freeing iocharset=iso8859-1
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 16
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: dc000000-dfffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47)
Subsystem: VIA Technologies, Inc. MVP3 ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06) (prog-if
8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d000 [size=16]
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 07)
Subsystem: Creative Labs: Unknown device 8061
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at dc00 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 SCSI storage controller: Adaptec AHA-2940U2/W
Subsystem: Adaptec: Unknown device a180
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (9750ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
BIST result: 00
Region 0: I/O ports at e000 [disabled] [size=256]
Region 1: Memory at e3000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at e2000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5446 (prog-if
00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0018
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e1000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none>
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Jun 25 16:03:12 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:12 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:13 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:14 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:14 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:14 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:14 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:14 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:14 mr-test-1 syslogd 1.4-0: restart.
Jun 25 16:03:19 mr-test-1 anacron[902]: Job `cron.daily' terminated
Jun 25 16:05:05 mr-test-1 kernel: read_super_block: can't find a reiserfs filesystem
on dev 02:00
Jun 25 16:05:05 mr-test-1 kernel: read_old_super_block: try to find super block in old
location
Jun 25 16:05:05 mr-test-1 kernel: read_old_super_block: can't find a reiserfs
filesystem on dev 02:00.
Jun 25 16:08:11 mr-test-1 anacron[902]: Job `cron.weekly' started
Jun 25 16:08:11 mr-test-1 anacron[1310]: Updated timestamp for job `cron.weekly' to
2001-06-25
Jun 25 16:10:00 mr-test-1 CROND[5031]: (root) CMD ( /sbin/rmmod -as)
Jun 25 16:10:29 mr-test-1 anacron[902]: Job `cron.weekly' terminated
Jun 25 16:10:29 mr-test-1 anacron[902]: Normal exit (2 jobs run)
Jun 25 16:11:23 mr-test-1 login(pam_unix)[978]: session opened for user root by
LOGIN(uid=0)
Jun 25 16:11:23 mr-test-1 -- root[978]: ROOT LOGIN ON tty4
Jun 25 16:11:55 mr-test-1 kernel: scsi0: PCI error Interrupt at seqaddr = 0x9
Jun 25 16:11:55 mr-test-1 kernel: scsi0: Data Parity Error Detected during address or
write data phase
Adaptec AIC7xxx driver version: 6.1.13
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
Channel A Target 0 Negotiation Settings
User: 20.000MB/s transfers (20.000MHz, offset 255)
Goal: 20.000MB/s transfers (20.000MHz, offset 31)
Curr: 20.000MB/s transfers (20.000MHz, offset 31)
Channel A Target 0 Lun 0 Settings
Commands Queued 10303
Commands Active 0
Command Openings 64
Max Tagged Openings 253
Device Queue Frozen Count 0
Channel A Target 1 Negotiation Settings
User: 40.000MB/s transfers (40.000MHz, offset 255)
Channel A Target 2 Negotiation Settings
User: 40.000MB/s transfers (40.000MHz, offset 255)
Channel A Target 3 Negotiation Settings
User: 20.000MB/s transfers (20.000MHz, offset 255)
Goal: 20.000MB/s transfers (20.000MHz, offset 15)
Curr: 20.000MB/s transfers (20.000MHz, offset 15)
Channel A Target 3 Lun 0 Settings
Commands Queued 3
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
Channel A Target 4 Negotiation Settings
User: 20.000MB/s transfers (20.000MHz, offset 255)
Goal: 20.000MB/s transfers (20.000MHz, offset 16)
Curr: 20.000MB/s transfers (20.000MHz, offset 16)
Channel A Target 4 Lun 0 Settings
Commands Queued 3
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
Channel A Target 5 Negotiation Settings
User: 20.000MB/s transfers (20.000MHz, offset 255)
Goal: 20.000MB/s transfers (20.000MHz, offset 15)
Curr: 20.000MB/s transfers (20.000MHz, offset 15)
Channel A Target 5 Lun 0 Settings
Commands Queued 3
Commands Active 0
Command Openings 1
Max Tagged Openings 0
Device Queue Frozen Count 0
Channel A Target 6 Negotiation Settings
User: 40.000MB/s transfers (40.000MHz, offset 255)
Channel A Target 7 Negotiation Settings
User: 40.000MB/s transfers (40.000MHz, offset 255)
Channel A Target 8 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Channel A Target 9 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Channel A Target 10 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Channel A Target 11 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Channel A Target 12 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Channel A Target 13 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Channel A Target 14 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Channel A Target 15 Negotiation Settings
User: 80.000MB/s transfers (40.000MHz, offset 255, 16bit)
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST318416N Rev: 0010
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: YAMAHA Model: CRW8824S Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x1106 device 0x0598
VIA Device unknown
STATUS 0x8290 COMMAND 0x0006
CLASS 0x06 0x00 0x00 REVISION 0x04
HEADER 0x00 LATENCY 0x10
pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x1106 device 0x8598
VIA VT 82C598 MVP3 PCI/AGP Bridge
STATUS 0x2220 COMMAND 0x0007
CLASS 0x06 0x04 0x00 REVISION 0x00
HEADER 0x01 LATENCY 0x00
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x00
IOBASE 0xc000 IOLIM 0xcfff SECSTATUS 0x0000
NOPREFETCH_MEMBASE 0xe0000000 MEMLIM 0xe1ffffff
PREFETCH_MEMBASE 0xdc000000 MEMLIM 0xdfffffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_PERR_EN
pci bus 0x0 cardnum 0x07 function 0x0000: vendor 0x1106 device 0x0586
VIA VT 82C586 MVP3 ISA Bridge
CardVendor 0x1106 card 0x0000 (VIA, Card unknown)
STATUS 0x0200 COMMAND 0x008f
CLASS 0x06 0x01 0x00 REVISION 0x47
HEADER 0x80 LATENCY 0x00
pci bus 0x0 cardnum 0x07 function 0x0001: vendor 0x1106 device 0x0571
VIA VT 82C586 MVP3 IDE Bridge
STATUS 0x0280 COMMAND 0x0007
CLASS 0x01 0x01 0x8a REVISION 0x06
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00
BASE4 0x0000d001 addr 0x0000d000 I/O
BYTE_0 0x3a09e20b BYTE_1 0x00 BYTE_2 0x806c848 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x07 function 0x0003: vendor 0x1106 device 0x3040
VIA VT 82C586B MVP3 ACPI Bridge
STATUS 0x0280 COMMAND 0x0000
CLASS 0x06 0x00 0x00 REVISION 0x10
pci bus 0x0 cardnum 0x09 function 0x0000: vendor 0x1102 device 0x0002
Creative Labs Device unknown
CardVendor 0x1102 card 0x8061 (Creative Labs, Card unknown)
STATUS 0x0290 COMMAND 0x0005
CLASS 0x04 0x01 0x00 REVISION 0x07
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00
BASE0 0x0000d801 addr 0x0000d800 I/O
MAX_LAT 0x14 MIN_GNT 0x02 INT_PIN 0x01 INT_LINE 0x0a
pci bus 0x0 cardnum 0x09 function 0x0001: vendor 0x1102 device 0x7002
Creative Labs Device unknown
CardVendor 0x1102 card 0x0020 (Creative Labs, Card unknown)
STATUS 0x0290 COMMAND 0x0005
CLASS 0x09 0x80 0x00 REVISION 0x07
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00
BASE0 0x0000dc01 addr 0x0000dc00 I/O
pci bus 0x0 cardnum 0x0b function 0x0000: vendor 0x9005 device 0x0010
Adaptec Device unknown
CardVendor 0x9005 card 0xa180 (Adaptec, Card unknown)
STATUS 0x0290 COMMAND 0x0006
CLASS 0x01 0x00 0x00 REVISION 0x00
BIST 0x80 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0x0000e001 addr 0x0000e000 I/O
BASE1 0xe3000004 addr 0xe3000000 MEM 64BIT
BASEROM 0xe2000000 addr 0xe2000000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x27 INT_PIN 0x01 INT_LINE 0x03
BYTE_0 0x540 BYTE_1 0x00 BYTE_2 0x806d628 BYTE_3 0xffffffff
pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x1002 device 0x5446
ATI Rage 128 RF
CardVendor 0x1002 card 0x0018 (ATI, Card unknown)
STATUS 0x02b0 COMMAND 0x0087
CLASS 0x03 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0xdc000008 addr 0xdc000000 MEM PREFETCHABLE
BASE1 0x0000c001 addr 0x0000c000 I/O
BASE2 0xe1000000 addr 0xe1000000 MEM
MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0xff
