Bindings for LP3943 MFD, GPIO and PWM controller are added.

Cc: devicet...@vger.kernel.org
Cc: Lee Jones <lee.jo...@linaro.org>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Samuel Ortiz <sa...@linux.intel.com>
Cc: Thierry Reding <thierry.red...@gmail.com>
Signed-off-by: Milo Kim <milo....@ti.com>
---
 .../devicetree/bindings/gpio/gpio-lp3943.txt       |   37 +++++++++++++
 Documentation/devicetree/bindings/mfd/lp3943.txt   |   33 +++++++++++
 .../devicetree/bindings/pwm/pwm-lp3943.txt         |   58 ++++++++++++++++++++
 3 files changed, 128 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt
 create mode 100644 Documentation/devicetree/bindings/pwm/pwm-lp3943.txt

diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt 
b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
new file mode 100644
index 0000000..80fcb7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
@@ -0,0 +1,37 @@
+TI/National Semiconductor LP3943 GPIO controller
+
+Required properties:
+  - compatible: "ti,lp3943-gpio"
+  - gpio-controller: Marks the device node as a GPIO controller.
+  - #gpio-cells: Should be 2. See gpio.txt in this directory for a
+                 description of the cells format.
+
+Example:
+Simple LED controls with LP3943 GPIO controller
+
+&i2c4 {
+       lp3943@60 {
+               compatible = "ti,lp3943";
+               reg = <0x60>;
+
+               gpioex: gpio {
+                       compatible = "ti,lp3943-gpio";
+                       gpio-controller;
+                       #gpio-cells = <2>;
+               };
+       };
+};
+
+leds {
+       compatible = "gpio-leds";
+       indicator1 {
+               label = "indi1";
+               gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
+       };
+
+       indicator2 {
+               label = "indi2";
+               gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
+               default-state = "off";
+       };
+};
diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt 
b/Documentation/devicetree/bindings/mfd/lp3943.txt
new file mode 100644
index 0000000..e8591d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/lp3943.txt
@@ -0,0 +1,33 @@
+TI/National Semiconductor LP3943 MFD driver
+
+Required properties:
+  - compatible: "ti,lp3943"
+  - reg: I2C slave address. From 0x60 to 0x67.
+
+LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm.
+
+For the LP3943 GPIO properties please refer to:
+Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+
+For the LP3943 PWM properties please refer to:
+Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
+
+Example:
+
+lp3943@60 {
+       compatible = "ti,lp3943";
+       reg = <0x60>;
+
+       gpioex: gpio {
+               compatible = "ti,lp3943-gpio";
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
+
+       pwm3943: pwm {
+               compatible = "ti,lp3943-pwm";
+               #pwm-cells = <2>;
+               ti,pwm0 = <8 9 10>;
+               ti,pwm1 = <15>;
+       };
+};
diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt 
b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
new file mode 100644
index 0000000..7bd9d3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
@@ -0,0 +1,58 @@
+TI/National Semiconductor LP3943 PWM controller
+
+Required properties:
+  - compatible: "ti,lp3943-pwm"
+  - #pwm-cells: Should be 2. See pwm.txt in this directory for a
+                description of the cells format.
+                Note that this hardware limits the period length to the
+                range 6250~1600000.
+  - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1.
+    0 = output 0
+    1 = output 1
+    .
+    .
+    15 = output 15
+
+Example:
+PWM 0 is for RGB LED brightness control
+PWM 1 is for brightness control of LP8557 backlight device
+
+&i2c3 {
+       lp3943@60 {
+               compatible = "ti,lp3943";
+               reg = <0x60>;
+
+               /*
+                * PWM 0 : output 8, 9 and 10
+                * PWM 1 : output 15
+                */
+               pwm3943: pwm {
+                       compatible = "ti,lp3943-pwm";
+                       #pwm-cells = <2>;
+                       ti,pwm0 = <8 9 10>;
+                       ti,pwm1 = <15>;
+               };
+       };
+
+};
+
+/* LEDs control with PWM 0 of LP3943 */
+pwmleds {
+       compatible = "pwm-leds";
+       rgb {
+               label = "indi::rgb";
+               pwms = <&pwm3943 0 10000>;
+               max-brightness = <255>;
+       };
+};
+
+&i2c4 {
+       /* Backlight control with PWM 1 of LP3943 */
+       backlight@2c {
+               compatible = "ti,lp8557";
+               reg = <0x2c>;
+
+               pwms = <&pwm3943 1 10000>;
+               pwm-names = "lp8557";
+       };
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to