On 10/10/2013 07:36 PM, Mark Rutland wrote:
> On Thu, Oct 10, 2013 at 02:41:36AM +0100, Chanwoo Choi wrote:
>> The s5m8767 regulator driver parse always the voltage table of buck2/3/4.
>> If gpio_dvs feature isn't used and dts haven't included the voltage table
>> of buck2/3/4, s5m8767 regulator driver return error and file probe state.
>>
>> This patch check only voltage table of buck on s5m8767_pmic_dt_parse_pdata()
>> if buck[2-4]_gpiodvs is true.
>>
>> Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
>> Signed-off-by: YoungJun Cho <yj44....@samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.p...@samsung.com>
>> ---
>> drivers/regulator/s5m8767.c | 54
>> +++++++++++++++++++++++----------------------
>> 1 file changed, 28 insertions(+), 26 deletions(-)
>>
>> diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
>> index cb6cdb3..29999c0 100644
>> --- a/drivers/regulator/s5m8767.c
>> +++ b/drivers/regulator/s5m8767.c
>> @@ -522,7 +522,7 @@ static int s5m8767_pmic_dt_parse_pdata(struct
>> platform_device *pdev,
>> struct device_node *pmic_np, *regulators_np, *reg_np;
>> struct sec_regulator_data *rdata;
>> struct sec_opmode_data *rmode;
>> - unsigned int i, dvs_voltage_nr = 1, ret;
>> + unsigned int i, dvs_voltage_nr = 8, ret;
>>
>> pmic_np = iodev->dev->of_node;
>> if (!pmic_np) {
>> @@ -586,15 +586,39 @@ static int s5m8767_pmic_dt_parse_pdata(struct
>> platform_device *pdev,
>> rmode++;
>> }
>>
>> - if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL))
>> + if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL))
>> {
>> pdata->buck2_gpiodvs = true;
>
> As this line is being changed, please switch to of_property_read_bool.
OK.
>
>>
>> - if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL))
>> + if (of_property_read_u32_array(pmic_np,
>> + "s5m8767,pmic-buck2-dvs-voltage",
>> + pdata->buck2_voltage, dvs_voltage_nr)) {
>
> Won't this break existing (not conforming to the binding) dts?
>
> $(git grep s5m8767,pmic-buck2-dvs-voltage) shows me
> arch/arm/boot/dts/exynos5250-arndale.dts is only has one entry in its
> s5m8767,pmic-buck3-uses-gpio-dvs property's list.
I checked it but exynos5250-arndale.dts haven't included
pmic-buck3-uses-gpio-dvs property.
What is reference code?
>
>> + dev_err(iodev->dev, "buck2 voltages not specified\n");
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL))
>> {
>> pdata->buck3_gpiodvs = true;
>
> Another of_proeprty_read_bool candidate.
OK.
>
>>
>> - if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL))
>> + if (of_property_read_u32_array(pmic_np,
>> + "s5m8767,pmic-buck3-dvs-voltage",
>> + pdata->buck3_voltage, dvs_voltage_nr)) {
>> + dev_err(iodev->dev, "buck3 voltages not specified\n");
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL))
>> {
>> pdata->buck4_gpiodvs = true;
>
> Similarly.
>
> In general I'm confused by the need for the *-uses-gpio-dvs properties.
> Are they not implied by the presence of *-dvs-voltage properties?
>
The s5m8767 support the power control using DVS(Dynamic Voltage scaling) by
using
GPIO or I2C interface between PMIC and AP.
When controlling DVS by using GPIO interface, *-uses-gpio-dvs/*-dvs-voltage
properties is used.
The s5m8767 pmic control DVS of one only buck using GPIO. If specific target
use GPIO interface
to control buck2 DVS, must set buck2-uses-gpio-dvs as true and
buck3/4-uses-gpio-dvs is false.
Also, GPIO interface include three gpio pin which select total 8 step voltage
according to
three gpio state. *-dvs-voltage properties include the voltage table of 8 step.
Also, you can check the aim of *-uses-gpio-dvs/*-dvs-voltage properties
on Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
