On 10/10/2013 11:31 AM, Felipe Balbi wrote:
Hi,
On Mon, Oct 07, 2013 at 06:12:30AM -0400, Matt Porter wrote:
Broadcom BCM281xx parts have a PHY control block that
operates in conjunction with the DWC2 USB OTG. This driver
exposes an API that allows control of power/reset for a
connected USB PHY.
Signed-off-by: Matt Porter <matt.por...@linaro.org>
Reviewed-by: Markus Mayer <markus.ma...@linaro.org>
Reviewed-by: Tim Kryger <tim.kry...@linaro.org>
---
.../devicetree/bindings/usb/bcm-kona-usb-ctrl.txt | 12 ++
drivers/usb/phy/Kconfig | 5 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/bcm-kona-usb.h | 31 +++++
drivers/usb/phy/phy-bcm-kona-ctrl.c | 151 +++++++++++++++++++++
5 files changed, 200 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
create mode 100644 drivers/usb/phy/bcm-kona-usb.h
create mode 100644 drivers/usb/phy/phy-bcm-kona-ctrl.c
diff --git a/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
b/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
new file mode 100644
index 0000000..98163f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/bcm-kona-usb-ctrl.txt
@@ -0,0 +1,12 @@
+BROADCOM KONA USB CONTROL
+
+Required properties:
+ - compatible: brcm,kona-ctrl-usb
+ - reg: offset and length of the USB control registers
+
+Example:
+
+ usbctl: usbctl@3f130000 {
+ compatible = "brcm,kona-ctrl-usb";
+ reg = <0x3f130000 0x28>;
+ };
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index d5589f9..2b7b4f1 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -100,6 +100,11 @@ config AM335X_PHY_USB
This driver provides PHY support for that phy which part for the
AM335x SoC.
+config BCM_KONA_CTRL_USB
+ tristate
+ help
+ Enable this to support the Broadcom Kona USB control block
+
config SAMSUNG_USBPHY
tristate
help
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 2135e85..98c545e 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o
obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
+obj-$(CONFIG_BCM_KONA_CTRL_USB) += phy-bcm-kona-ctrl.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o
obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
diff --git a/drivers/usb/phy/bcm-kona-usb.h b/drivers/usb/phy/bcm-kona-usb.h
new file mode 100644
index 0000000..4563dd6
--- /dev/null
+++ b/drivers/usb/phy/bcm-kona-usb.h
@@ -0,0 +1,31 @@
+/*
+ * bcm_kona_usb.h -- Broadcom Kona USB header file
+ *
+ * Copyright (C) 2013 Linaro Limited
+ * Matt Porter <matt.por...@linaro.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BCM_KONA_USB_H
+#define __BCM_KONA_USB_H
+
+#include <linux/usb/phy.h>
+
+struct bcm_kona_usb {
+ struct usb_phy phy;
+ struct device *dev;
+ struct device *ctrl_dev;
+};
+
+extern struct device *bcm_kona_get_ctrl_dev(void);
+extern void bcm_kona_ctrl_usb_phy_power(struct device *, int);
looks like a job for extcon fwk.
diff --git a/drivers/usb/phy/phy-bcm-kona-ctrl.c
b/drivers/usb/phy/phy-bcm-kona-ctrl.c
new file mode 100644
index 0000000..d2936b6
--- /dev/null
+++ b/drivers/usb/phy/phy-bcm-kona-ctrl.c
@@ -0,0 +1,151 @@
+/*
+ * phy-bcm-kona-ctrl.c - Broadcom Kona USB Control Driver
+ *
+ * Based on phy-omap-control.c
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2013 Linaro Limited
+ * Matt Porter <matt.por...@linaro.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include "bcm-kona-usb.h"
+
+#define OTGCTL_OTGSTAT2 (1 << 31)
+#define OTGCTL_OTGSTAT1 (1 << 30)
+#define OTGCTL_PRST_N_SW (1 << 11)
+#define OTGCTL_HRESET_N (1 << 10)
+#define OTGCTL_UTMI_LINE_STATE1 (1 << 9)
+#define OTGCTL_UTMI_LINE_STATE0 (1 << 8)
+
+#define P1CTL_SOFT_RESET (1 << 1)
+#define P1CTL_NON_DRIVING (1 << 0)
+
+struct bcm_kona_usb_ctrl_regs {
+ u32 ctrl;
+ u32 cfg;
+ u32 p1ctl;
+ u32 status;
+ u32 bc_cfg;
+ u32 tp_in;
+ u32 tp_out;
+ u32 phy_ctrl;
+ u32 usbreg;
+ u32 usbproben;
+};
+
+struct bcm_kona_ctrl_usb {
+ struct device *dev;
+ struct bcm_kona_usb_ctrl_regs *regs;
+};
+
+static struct bcm_kona_ctrl_usb *ctrl_usb;
+
+/**
+ * bcm_kona_ctrl_dev - returns the device pointer for this control device
+ *
+ * This API should be called to get the device pointer for the Kona USB
+ * control device. This device pointer should be used when calling the
+ * exported bcm_kona_ctrl_usb_phy_power() API.
+ */
+struct device *bcm_kona_get_ctrl_dev(void)
+{
+ if (!ctrl_usb)
+ return ERR_PTR(-ENODEV);
+
+ return ctrl_usb->dev;
+}
+EXPORT_SYMBOL_GPL(bcm_kona_get_ctrl_dev);
definitely a job for extcon ;-)
+void bcm_kona_ctrl_usb_phy_power(struct device *dev, int on)
+{
+ struct bcm_kona_ctrl_usb *ctrl = dev_get_drvdata(dev);
+ u32 val;
+
+ val = readl(&ctrl->regs->ctrl);
+ if (on) {
+ /* Configure and power PHY */
+ val &= ~(OTGCTL_OTGSTAT2 | OTGCTL_OTGSTAT1 |
+ OTGCTL_UTMI_LINE_STATE1 | OTGCTL_UTMI_LINE_STATE0);
+ val |= OTGCTL_PRST_N_SW | OTGCTL_HRESET_N;
+ writel(val, &ctrl->regs->ctrl);
+
+ /* Soft reset PHY */
+ val = readl(&ctrl->regs->p1ctl);
+ val &= ~P1CTL_NON_DRIVING;
+ val |= P1CTL_SOFT_RESET;
+ writel(val, &ctrl->regs->p1ctl);
+ writel(val & ~P1CTL_SOFT_RESET, &ctrl->regs->p1ctl);
+ /* Reset needs to be asserted for 2ms */
+ mdelay(2);
+ writel(val | P1CTL_SOFT_RESET, &ctrl->regs->p1ctl);
+ } else {
+ val &= ~(OTGCTL_PRST_N_SW | OTGCTL_HRESET_N);
+ writel(val, &ctrl->regs->ctrl);
+ }
+}
+EXPORT_SYMBOL_GPL(bcm_kona_ctrl_usb_phy_power);
what a hack :-)
:)
Please use phy->init() and phy->exit() callbacks. In fact, please use
Kishon's generic PHY layer.
Ok, reworking on top of his series...looks to be straightforward.
Thanks,
Matt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
