This patch adds a compatible for AM437x "ti,am43xx-usb2" to
reuse the same phy-omap-usb2 driver.

Also updated the documentation to add the new compatible.

Signed-off-by: George Cherian <george.cher...@ti.com>
---
 Documentation/devicetree/bindings/usb/usb-phy.txt |  2 +-
 drivers/phy/phy-omap-usb2.c                       | 13 ++++++++++---
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt 
b/Documentation/devicetree/bindings/usb/usb-phy.txt
index c0245c8..d5a7f21 100644
--- a/Documentation/devicetree/bindings/usb/usb-phy.txt
+++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
@@ -3,7 +3,7 @@ USB PHY
 OMAP USB2 PHY
 
 Required properties:
- - compatible: Should be "ti,omap-usb2"
+ - compatible: Should be "ti,omap-usb2" or "ti,am437x-usb2"
  - reg : Address and length of the register set for the device.
  - #phy-cells: determine the number of cells that should be given in the
    phandle while referencing this phy.
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index bfc5c33..0529c83 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/usb/omap_control_usb.h>
 #include <linux/phy/phy.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 
 /**
@@ -172,7 +173,10 @@ static int omap_usb2_probe(struct platform_device *pdev)
        phy->dev                = &pdev->dev;
 
        phy->phy.dev            = phy->dev;
-       phy->phy.label          = "omap-usb2";
+       if (of_device_is_compatible(node, "ti,am437x-usb2"))
+               phy->phy.label          = "am437x-usb2";
+       else
+               phy->phy.label          = "omap-usb2";
        phy->phy.set_suspend    = omap_usb2_suspend;
        phy->phy.otg            = otg;
        phy->phy.type           = USB_PHY_TYPE_USB2;
@@ -201,8 +205,10 @@ static int omap_usb2_probe(struct platform_device *pdev)
 
        otg->set_host           = omap_usb_set_host;
        otg->set_peripheral     = omap_usb_set_peripheral;
-       otg->set_vbus           = omap_usb_set_vbus;
-       otg->start_srp          = omap_usb_start_srp;
+       if (of_device_is_compatible(node, "ti,omap-usb2")) {
+               otg->set_vbus           = omap_usb_set_vbus;
+               otg->start_srp          = omap_usb_start_srp;
+       }
        otg->phy                = &phy->phy;
 
        platform_set_drvdata(pdev, phy);
@@ -300,6 +306,7 @@ static const struct dev_pm_ops omap_usb2_pm_ops = {
 #ifdef CONFIG_OF
 static const struct of_device_id omap_usb2_id_table[] = {
        { .compatible = "ti,omap-usb2" },
+       { .compatible = "ti,am437x-usb2" },
        {}
 };
 MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
-- 
1.8.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to