Dear Shawn; Thank you for your comments. Should I also add Voipac to Documentation/devicetree/bindings/vendor-prefixes.txt?
Best regards; Rostislav Lisovy On Wed, 2013-10-23 at 15:27 +0800, Shawn Guo wrote: > On Tue, Oct 22, 2013 at 07:07:22PM +0200, Rostislav Lisovy wrote: > > Enable UART1 and FEC > > You have more than these two enabled. > > > > > Signed-off-by: Rostislav Lisovy <lis...@gmail.com> > > > > create mode 100644 arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi > > > > diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi > > b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi > > new file mode 100644 > > index 0000000..04695c9 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi > > @@ -0,0 +1,195 @@ > > +/* > > + * Copyright 2013 Rostislav Lisovy <lis...@gmail.com>, PiKRON s.r.o. > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 or later at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include "imx53.dtsi" > > + > > +/ { > > + model = "Voipac i.MX53 X53-DMM-668"; > > + compatible = "vp,imx53-dmm-668", "fsl,imx53"; > > + > > + memory@0 { > > + device_type = "memory"; > > + reg = <0x70000000 0x20000000>; > > + }; > > + > > + memory@1 { > > + device_type = "memory"; > > + reg = <0xb0000000 0x20000000>; > > + }; > > The 'num' in memory@num should match the first number in 'reg' property, > so they should looks like: > > memory@70000000 { > device_type = "memory"; > reg = <0x70000000 0x20000000>; > } > > memory@b0000000 { > device_type = "memory"; > reg = <0xb0000000 0x20000000>; > } > > > + > > + regulators { > > + compatible = "simple-bus"; > > + > > + reg_3p3v: 3p3v { > > + compatible = "regulator-fixed"; > > + regulator-name = "3P3V"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + }; > > + }; > > +}; > > + > > +&iomuxc { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_hog>; > > + > > + hog { > > + pinctrl_hog: hoggrp { > > + fsl,pins = < > > + /* Make DA9053 regulator functional */ > > + MX53_PAD_GPIO_16__GPIO7_11 0x80000000 > > + > > Drop these blank lines. We generally only have blank lines between > nodes. > > > + /* FEC Power enable */ > > + MX53_PAD_GPIO_11__GPIO4_1 0x80000000 > > + > > + /* FEC RST */ > > + MX53_PAD_GPIO_12__GPIO4_2 0x80000000 > > + >; > > + }; > > + }; > > +}; > > + > > +&uart1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart1_2>; > > + status = "okay"; > > +}; > > + > > +&i2c1 { > > Please sort these nodes alphabetically in label name, so that new node > can find they slots easily. > > Shawn > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
