1. Simplify function flow
2. Display errors in error or warnings level instead of debug.
3. Remove excessive debug messages
Signed-off-by: Tomas Winkler <tomas.wink...@intel.com>
---
drivers/misc/mei/interrupt.c | 79 ++++++++++++++++++++++----------------------
drivers/misc/mei/mei_dev.h | 10 ++++++
2 files changed, 50 insertions(+), 39 deletions(-)
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 7a95c07..9c8225b 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -301,13 +301,11 @@ int mei_irq_read_handler(struct mei_device *dev,
struct mei_cl_cb *cmpl_list, s32 *slots)
{
struct mei_msg_hdr *mei_hdr;
- struct mei_cl *cl_pos = NULL;
- struct mei_cl *cl_next = NULL;
- int ret = 0;
+ struct mei_cl *cl;
+ int ret;
if (!dev->rd_msg_hdr) {
dev->rd_msg_hdr = mei_read_hdr(dev);
- dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots);
(*slots)--;
dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots);
}
@@ -315,61 +313,64 @@ int mei_irq_read_handler(struct mei_device *dev,
dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
if (mei_hdr->reserved || !dev->rd_msg_hdr) {
- dev_dbg(&dev->pdev->dev, "corrupted message header.\n");
+ dev_err(&dev->pdev->dev, "corrupted message header 0x%08X\n",
+ dev->rd_msg_hdr);
ret = -EBADMSG;
goto end;
}
- if (mei_hdr->host_addr || mei_hdr->me_addr) {
- list_for_each_entry_safe(cl_pos, cl_next,
- &dev->file_list, link) {
- dev_dbg(&dev->pdev->dev,
- "list_for_each_entry_safe read host"
- " client = %d, ME client = %d\n",
- cl_pos->host_client_id,
- cl_pos->me_client_id);
- if (mei_cl_hbm_equal(cl_pos, mei_hdr))
- break;
- }
-
- if (&cl_pos->link == &dev->file_list) {
- dev_dbg(&dev->pdev->dev, "corrupted message header\n");
- ret = -EBADMSG;
- goto end;
- }
- }
- if (((*slots) * sizeof(u32)) < mei_hdr->length) {
- dev_err(&dev->pdev->dev,
- "we can't read the message slots =%08x.\n",
+ if (mei_slots2data(*slots) < mei_hdr->length) {
+ dev_err(&dev->pdev->dev, "less data available than
length=%08x.\n",
*slots);
/* we can't read the message */
ret = -ERANGE;
goto end;
}
- /* decide where to read the message too */
- if (!mei_hdr->host_addr) {
- dev_dbg(&dev->pdev->dev, "call mei_hbm_dispatch.\n");
+ /* HBM message */
+ if (mei_hdr->host_addr == 0 && mei_hdr->me_addr == 0) {
mei_hbm_dispatch(dev, mei_hdr);
- dev_dbg(&dev->pdev->dev, "end mei_hbm_dispatch.\n");
- } else if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id &&
- (MEI_FILE_CONNECTED == dev->iamthif_cl.state) &&
- (dev->iamthif_state == MEI_IAMTHIF_READING)) {
+ ret = 0;
+ dev_dbg(&dev->pdev->dev, "mei_hbm_dispatch.\n");
+ goto reset_slots;
+ }
- dev_dbg(&dev->pdev->dev, "call mei_amthif_irq_read_msg.\n");
- dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
+ /* find recepient cl */
+ list_for_each_entry(cl, &dev->file_list, link) {
+ if (mei_cl_hbm_equal(cl, mei_hdr)) {
+ cl_dbg(dev, cl, "got a message\n");
+ break;
+ }
+ }
+
+ /* if no recepient cl was found we assume corrupted header\n */
+ if (&cl->link == &dev->file_list) {
+ dev_err(&dev->pdev->dev, "no destination client found 0x%08X\n",
+ dev->rd_msg_hdr);
+ ret = -EBADMSG;
+ goto end;
+ }
+
+ if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id &&
+ MEI_FILE_CONNECTED == dev->iamthif_cl.state &&
+ dev->iamthif_state == MEI_IAMTHIF_READING) {
ret = mei_amthif_irq_read_msg(dev, mei_hdr, cmpl_list);
- if (ret)
+ if (ret) {
+ dev_err(&dev->pdev->dev, "mei_amthif_irq_read_msg
failed = %d\n",
+ ret);
goto end;
+ }
} else {
- dev_dbg(&dev->pdev->dev, "call mei_cl_irq_read_msg.\n");
- dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr));
ret = mei_cl_irq_read_msg(dev, mei_hdr, cmpl_list);
- if (ret)
+ if (ret) {
+ dev_err(&dev->pdev->dev, "mei_cl_irq_read_msg failed =
%d\n",
+ ret);
goto end;
+ }
}
+reset_slots:
/* reset the number of slots and header */
*slots = mei_count_full_read_slots(dev);
dev->rd_msg_hdr = 0;
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 6f577bf..4a7ee81 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -456,6 +456,16 @@ static inline u32 mei_data2slots(size_t length)
return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, 4);
}
+/**
+ * mei_slots2data- get data in slots - bytes from slots
+ * @slots - number of available slots
+ * returns - number of bytes in slots
+ */
+static inline u32 mei_slots2data(int slots)
+{
+ return slots * 4;
+}
+
/*
* mei init function prototypes
*/
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
