On 16/10/2013 11:56, Johan Hovold :
Make sure RTC-interrupts are disabled at shutdown.
As the RTC is generally powered by backup power (VDDBU), its interrupts
are not disabled on wake-up, user, watchdog or software reset. This
could cause troubles on other systems (e.g. older kernels) if an
interrupt occurs before a handler has been installed at next boot.
Let us be well-behaved and disable them on clean shutdowns at least (as
do the RTT-based rtc-at91sam9 driver).
Signed-off-by: Johan Hovold <jhov...@gmail.com>
Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com>
Thank you Johan.
Andrew, could you add this patch to your rtc queue or should I re-send it ?
Best regards,
---
drivers/rtc/rtc-at91rm9200.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 7418926..ea088e9 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -442,6 +442,14 @@ static int __exit at91_rtc_remove(struct platform_device
*pdev)
return 0;
}
+static void at91_rtc_shutdown(struct platform_device *pdev)
+{
+ /* Disable all interrupts */
+ at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+ AT91_RTC_SECEV | AT91_RTC_TIMEV |
+ AT91_RTC_CALEV);
+}
+
#ifdef CONFIG_PM_SLEEP
/* AT91RM9200 RTC Power management control */
@@ -480,6 +488,7 @@ static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend,
at91_rtc_resume);
static struct platform_driver at91_rtc_driver = {
.remove = __exit_p(at91_rtc_remove),
+ .shutdown = at91_rtc_shutdown,
.driver = {
.name = "at91_rtc",
.owner = THIS_MODULE,
--
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
