Add support for the six-channel Kona PWM controller found on Broadcom
mobile SoCs like bcm281xx.
Signed-off-by: Tim Kryger <tim.kry...@linaro.org>
Reviewed-by: Alex Elder <el...@linaro.org>
Reviewed-by: Markus Mayer <markus.ma...@linaro.org>
---
drivers/pwm/Kconfig | 10 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-bcm-kona.c | 226 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 237 insertions(+)
create mode 100644 drivers/pwm/pwm-bcm-kona.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 75840b5..4ed5d8b 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -53,6 +53,16 @@ config PWM_ATMEL_TCB
To compile this driver as a module, choose M here: the module
will be called pwm-atmel-tcb.
+config PWM_BCM_KONA
+ tristate "Kona PWM support"
+ depends on ARCH_BCM_MOBILE
+ default y
+ help
+ Generic PWM framework driver for Broadcom Kona PWM block.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-bcm-kona.
+
config PWM_BFIN
tristate "Blackfin PWM support"
depends on BFIN_GPTIMERS
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 77a8c18..dd96938 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PWM_SYSFS) += sysfs.o
obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
+obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
obj-$(CONFIG_PWM_IMX) += pwm-imx.o
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
new file mode 100644
index 0000000..cdf30d9
--- /dev/null
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -0,0 +1,226 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define KONA_PWM_CHANNEL_CNT 6
+
+#define PWM_CONTROL_OFFSET (0x00000000)
+#define PWM_CONTROL_INITIAL (0x3f3f3f00)
+#define PWMOUT_POLARITY(chan) (0x1 << (8 + chan))
+#define PWMOUT_ENABLE(chan) (0x1 << chan)
+
+#define PRESCALE_OFFSET (0x00000004)
+#define PRESCALE_SHIFT(chan) (chan << 2)
+#define PRESCALE_MASK(chan) (~(0x7 << (chan << 2)))
+#define PRESCALE_MIN (0x00000000)
+#define PRESCALE_MAX (0x00000007)
+
+#define PERIOD_COUNT_OFFSET(chan) (0x00000008 + (chan << 3))
+#define PERIOD_COUNT_MIN (0x00000002)
+#define PERIOD_COUNT_MAX (0x00ffffff)
+
+#define DUTY_CYCLE_HIGH_OFFSET(chan) (0x0000000c + (chan << 3))
+#define DUTY_CYCLE_HIGH_MIN (0x00000000)
+#define DUTY_CYCLE_HIGH_MAX (0x00ffffff)
+
+struct kona_pwmc {
+ struct pwm_chip chip;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static void kona_pwmc_apply_settings(struct kona_pwmc *kp, int chan)
+{
+ /* New settings take effect on rising edge of enable bit */
+ writel(readl(kp->base + PWM_CONTROL_OFFSET) & ~PWMOUT_ENABLE(chan),
+ kp->base + PWM_CONTROL_OFFSET);
+ writel(readl(kp->base + PWM_CONTROL_OFFSET) | PWMOUT_ENABLE(chan),
+ kp->base + PWM_CONTROL_OFFSET);
+}
+
+static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct kona_pwmc *kp = dev_get_drvdata(chip->dev);
+ u64 val, div, clk_rate;
+ unsigned long prescale = PRESCALE_MIN, pc, dc;
+ int chan = pwm->hwpwm;
+
+ /*
+ * Find period count, duty count and prescale to suit duty_ns and
+ * period_ns. This is done according to formulas described below:
+ *
+ * period_ns = 10^9 * (PRESCALE + 1) * PC / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ *
+ * PC = (PWM_CLK_RATE * period_ns) / (10^9 * (PRESCALE + 1))
+ * DC = (PWM_CLK_RATE * duty_ns) / (10^9 * (PRESCALE + 1))
+ */
+
+ clk_rate = clk_get_rate(kp->clk);
+ while (1) {
+ div = 1000000000;
+ div *= 1 + prescale;
+ val = clk_rate * period_ns;
+ pc = div64_u64(val, div);
+ val = clk_rate * duty_ns;
+ dc = div64_u64(val, div);
+
+ /* If duty_ns or period_ns are not achievable then return */
+ if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN)
+ return -EINVAL;
+
+ /*
+ * If pc or dc have crossed their upper limit, then increase
+ * prescale and recalculate pc and dc.
+ */
+ if (pc > PERIOD_COUNT_MAX || dc > DUTY_CYCLE_HIGH_MAX) {
+ if (++prescale > PRESCALE_MAX)
+ return -EINVAL;
+ continue;
+ }
+ break;
+ }
+
+ /* Program prescale */
+ writel((readl(kp->base + PRESCALE_OFFSET) & PRESCALE_MASK(chan)) |
+ prescale << PRESCALE_SHIFT(chan),
+ kp->base + PRESCALE_OFFSET);
+
+ /* Program period count */
+ writel(pc, kp->base + PERIOD_COUNT_OFFSET(chan));
+
+ /* Program duty cycle high count */
+ writel(dc, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+
+ if (test_bit(PWMF_ENABLED, &pwm->flags))
+ kona_pwmc_apply_settings(kp, chan);
+
+ return 0;
+}
+
+static int kona_pwmc_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ return kona_pwmc_config(chip, pwm, pwm->duty_cycle, pwm->period);
+}
+
+static void kona_pwmc_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct kona_pwmc *kp = dev_get_drvdata(chip->dev);
+ int chan = pwm->hwpwm;
+
+ /*
+ * The PWM hardware lacks a proper way to be disabled so
+ * we just program zero duty cycle high count instead
+ */
+
+ writel(0, kp->base + DUTY_CYCLE_HIGH_OFFSET(chan));
+ kona_pwmc_apply_settings(kp, chan);
+}
+
+static const struct pwm_ops kona_pwm_ops = {
+ .config = kona_pwmc_config,
+ .owner = THIS_MODULE,
+ .enable = kona_pwmc_enable,
+ .disable = kona_pwmc_disable,
+};
+
+static int kona_pwmc_probe(struct platform_device *pdev)
+{
+ struct kona_pwmc *kp;
+ struct resource *res;
+ int ret = 0;
+
+ dev_dbg(&pdev->dev, "bcm_kona_pwmc probe\n");
+
+ kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+ if (kp == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ kp->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(kp->base))
+ return PTR_ERR(kp->base);
+
+ kp->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(kp->clk)) {
+ dev_err(&pdev->dev, "Clock get failed : Err %d\n", ret);
+ return PTR_ERR(kp->clk);
+ }
+
+ ret = clk_prepare_enable(kp->clk);
+ if (ret < 0)
+ return ret;
+
+ /* Set smooth mode, push/pull, and normal polarity for all channels */
+ writel(PWM_CONTROL_INITIAL, kp->base + PWM_CONTROL_OFFSET);
+
+ dev_set_drvdata(&pdev->dev, kp);
+
+ kp->chip.dev = &pdev->dev;
+ kp->chip.ops = &kona_pwm_ops;
+ kp->chip.base = -1;
+ kp->chip.npwm = KONA_PWM_CHANNEL_CNT;
+
+ ret = pwmchip_add(&kp->chip);
+ if (ret < 0) {
+ clk_disable_unprepare(kp->clk);
+ dev_err(&pdev->dev, "pwmchip_add() failed: Err %d\n", ret);
+ }
+
+ return ret;
+}
+
+static int kona_pwmc_remove(struct platform_device *pdev)
+{
+ struct kona_pwmc *kp = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(kp->clk);
+ return pwmchip_remove(&kp->chip);
+}
+
+static const struct of_device_id bcm_kona_pwmc_dt[] = {
+ {.compatible = "brcm,kona-pwm"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_pwmc_dt);
+
+static struct platform_driver kona_pwmc_driver = {
+
+ .driver = {
+ .name = "bcm-kona-pwm",
+ .owner = THIS_MODULE,
+ .of_match_table = bcm_kona_pwmc_dt,
+ },
+
+ .probe = kona_pwmc_probe,
+ .remove = kona_pwmc_remove,
+};
+
+module_platform_driver(kona_pwmc_driver);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Driver for KONA PWMC");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
--
1.8.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
