Will fall back to below 4g if it can not find any above 4g.
x86 32bit without X86_PAE support will have bottom set to 0, because
resource_size_t is 32bit.
Also for 32bit with resource_size_t 64bit kernel on machine with pae support
we are safe because iomem_resource is limited to 32bit according to
x86_phys_bits.
-v2: update bottom assigning to make it clear for non-pae support machine.
-v3: Bjorn's change:
use MAX_RESOURCE instead of -1
use start/end instead of bottom/max
for all arch instead of just x86_64
-v4: updated after PCI_MAX_RESOURCE_32 change.
-v5: restore io handling to use PCI_MAX_RESOURCE_32 as limit.
-v6: checking pcibios_resource_to_bus return for every bus res, to decide it
if we need to try high at first.
It supports all arches instead of just x86_64.
Signed-off-by: Yinghai Lu <ying...@kernel.org>
---
arch/x86/include/asm/pci.h | 1 -
drivers/pci/bus.c | 42 ++++++++++++++++++++++++++++++++++--------
drivers/pci/pci.h | 2 ++
include/linux/pci.h | 4 ----
4 files changed, 36 insertions(+), 13 deletions(-)
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 947b5c4..122c299 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -125,7 +125,6 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc
*msidesc,
/* generic pci stuff */
#include <asm-generic/pci.h>
-#define PCIBIOS_MAX_MEM_32 0xffffffff
#ifdef CONFIG_NUMA
/* Returns the node based on pci bus */
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 1ffd95b..f801f6a 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -125,15 +125,13 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct
resource *res,
{
int i, ret = -ENOMEM;
struct resource *r;
- resource_size_t max = -1;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
- /* don't allocate too high if the pref mem doesn't support 64bit*/
- if (!(res->flags & IORESOURCE_MEM_64))
- max = PCIBIOS_MAX_MEM_32;
-
pci_bus_for_each_resource(bus, r, i) {
+ resource_size_t start, end, middle;
+ struct pci_bus_region region;
+
if (!r)
continue;
@@ -147,14 +145,42 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct
resource *res,
!(res->flags & IORESOURCE_PREFETCH))
continue;
+ start = 0;
+ end = MAX_RESOURCE;
+ /*
+ * don't allocate too high if the pref mem doesn't
+ * support 64bit, also if this is a 64-bit mem
+ * resource, try above 4GB first
+ */
+ __pcibios_resource_to_bus(bus, ®ion, r);
+ if (region.start <= PCI_MAX_ADDR_32 &&
+ region.end > PCI_MAX_ADDR_32) {
+ middle = pcibios_bus_addr_to_res(bus, res->flags,
+ PCI_MAX_ADDR_32);
+ if (res->flags & IORESOURCE_MEM_64)
+ start = middle + 1;
+ else
+ end = middle;
+ } else if (region.start > PCI_MAX_ADDR_32 &&
+ !(res->flags & IORESOURCE_MEM_64))
+ continue;
+
+again:
/* Ok, try it out.. */
ret = allocate_resource(r, res, size,
- r->start ? : min,
- max, align,
+ max(start, r->start ? : min),
+ end, align,
alignf, alignf_data);
if (ret == 0)
- break;
+ return 0;
+
+ if (start != 0) {
+ start = 0;
+ goto again;
+ }
}
+
+
return ret;
}
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 9c91ecc..aea4efb 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -198,6 +198,8 @@ enum pci_bar_type {
pci_bar_mem64, /* A 64-bit memory BAR */
};
+#define PCI_MAX_ADDR_32 ((resource_size_t)0xffffffff)
+
bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *pl,
int crs_timeout);
int pci_setup_device(struct pci_dev *dev);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 3c6e399..1c69789 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1491,10 +1491,6 @@ static inline struct pci_dev *pci_dev_get(struct pci_dev
*dev)
#include <asm/pci.h>
-#ifndef PCIBIOS_MAX_MEM_32
-#define PCIBIOS_MAX_MEM_32 (-1)
-#endif
-
/* these helpers provide future and backwards compatibility
* for accessing popular PCI BAR info */
#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
