3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhov...@gmail.com>

commit 94c4c79f2f1acca6e69a50bff5a7d9027509c16b upstream.

Make sure the RTT-interrupts are masked at boot by adding a new helper
function to be used at SOC-init.

This fixes hanged boot on all AT91 SOCs with an RTT, for example, if an
RTT-alarm goes off after a non-clean shutdown (e.g. when using RTC
wakeup).

The RTC and RTT-peripherals are powered by backup power (VDDBU) (on all
AT91 SOCs but RM9200) and are not reset on wake-up, user, watchdog or
software reset. This means that their interrupts may be enabled during
early boot if, for example, they where not disabled during a previous
shutdown (e.g. due to a buggy driver or a non-clean shutdown such as a
user reset). Furthermore, an RTC or RTT-alarm may also be active.

The RTC and RTT-interrupts use the shared system-interrupt line, which
is also used by the PIT, and if an interrupt occurs before a handler
(e.g. RTC-driver) has been installed this leads to the system interrupt
being disabled and prevents the system from booting.

Note that when boot hangs due to an early RTC or RTT-interrupt, the only
way to get the system to start again is to remove the backup power (e.g.
battery) or to disable the interrupt manually from the bootloader. In
particular, a user reset is not sufficient.

Signed-off-by: Johan Hovold <jhov...@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.fe...@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>

---
 arch/arm/mach-at91/at91sam9260.c |    2 ++
 arch/arm/mach-at91/at91sam9261.c |    2 ++
 arch/arm/mach-at91/at91sam9263.c |    3 +++
 arch/arm/mach-at91/at91sam9g45.c |    1 +
 arch/arm/mach-at91/at91sam9rl.c  |    1 +
 arch/arm/mach-at91/generic.h     |    1 +
 arch/arm/mach-at91/sysirq_mask.c |   24 ++++++++++++++++++++++++
 7 files changed, 34 insertions(+)

--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -351,6 +351,8 @@ static void __init at91sam9260_initializ
        at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << 
AT91SAM9260_ID_IRQ1)
                        | (1 << AT91SAM9260_ID_IRQ2);
 
+       at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
+
        /* Register GPIO subsystem */
        at91_gpio_init(at91sam9260_gpio, 3);
 }
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -293,6 +293,8 @@ static void __init at91sam9261_initializ
        at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << 
AT91SAM9261_ID_IRQ1)
                        | (1 << AT91SAM9261_ID_IRQ2);
 
+       at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
+
        /* Register GPIO subsystem */
        at91_gpio_init(at91sam9261_gpio, 3);
 }
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -329,6 +329,9 @@ static void __init at91sam9263_initializ
        arm_pm_restart = at91sam9_alt_restart;
        at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << 
AT91SAM9263_ID_IRQ1);
 
+       at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
+       at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
+
        /* Register GPIO subsystem */
        at91_gpio_init(at91sam9263_gpio, 5);
 }
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -377,6 +377,7 @@ static void __init at91sam9g45_initializ
        at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 
        at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
+       at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
 
        /* Register GPIO subsystem */
        at91_gpio_init(at91sam9g45_gpio, 5);
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -296,6 +296,7 @@ static void __init at91sam9rl_initialize
        at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
        at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
+       at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
 
        /* Register GPIO subsystem */
        at91_gpio_init(at91sam9rl_gpio, 4);
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -34,6 +34,7 @@ extern int  __init at91_aic_of_init(stru
 extern int  __init at91_aic5_of_init(struct device_node *node,
                                    struct device_node *parent);
 extern void __init at91_sysirq_mask_rtc(u32 rtc_base);
+extern void __init at91_sysirq_mask_rtt(u32 rtt_base);
 
 
  /* Timer */
--- a/arch/arm/mach-at91/sysirq_mask.c
+++ b/arch/arm/mach-at91/sysirq_mask.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/io.h>
+#include <mach/at91_rtt.h>
 
 #include "generic.h"
 
@@ -44,4 +45,27 @@ void __init at91_sysirq_mask_rtc(u32 rtc
        }
 
        iounmap(base);
+}
+
+void __init at91_sysirq_mask_rtt(u32 rtt_base)
+{
+       void __iomem *base;
+       void __iomem *reg;
+       u32 mode;
+
+       base = ioremap(rtt_base, 16);
+       if (!base)
+               return;
+
+       reg = base + AT91_RTT_MR;
+
+       mode = readl_relaxed(reg);
+       if (mode & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)) {
+               pr_info("AT91: Disabling rtt irq\n");
+               mode &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
+               writel_relaxed(mode, reg);
+               (void)readl_relaxed(reg);                       /* flush */
+       }
+
+       iounmap(base);
 }


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to