On Friday 06 December 2013 04:49 AM, Stephen Warren wrote:
On 12/05/2013 04:16 PM, Stephen Warren wrote:
On 12/05/2013 03:57 AM, Laxman Dewangan wrote:
The tegra124 pinmux controller is identical to tegra114 with
removing some of existing pins from T114 and adding new pins.
I already sent this patch.
Oh, I do notice one difference between the two patches:
Mine:
+ reg = <0x70000868 0x148>, /* Pad control registers */
+ <0x70003000 0x40c>; /* Mux registers */
Yours:
+ reg = <0x70000868 0x164 /* Pad control registers */
+ 0x70003000 0x434>; /* PinMux registers */
Are the increase register lengths in your patch correct? If so, I guess
I'll drop my patch and replace it with yours if you fix up the unit address.
Yes, the last entry of the bank 0 and 1 are:
DRV_PINGROUP(ao4, 0x9c8, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30,
2, Y),
and
PINGROUP(dp_hpd_pff0, DP, RSVD2, RSVD3,
RSVD4, DP, 0x3430, N, N, N),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
