[PATCH 1/5] Documentation: APM X-Gene SoC Ethernet DTS binding documentation

[Iyappan Subramanian]

Documentation explaining dts nodes.

Signed-off-by: Iyappan Subramanian <isubraman...@apm.com>
Signed-off-by: Ravi Patel <rapa...@apm.com>
Signed-off-by: Keyur Chudgar <kchud...@apm.com>
---
 .../devicetree/bindings/net/apm-xgene-enet.txt     |   67 ++++++++++++++++++++
 1 file changed, 67 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt

diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt 
b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
new file mode 100644
index 0000000..8b88b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -0,0 +1,67 @@
+APM X-Gene SoC Ethernet nodes
+
+Ethernet nodes are defined to describe on-chip ethernet interfaces in
+APM X-Gene SoC. Ethernet subsystem communicates with a central Queue Manager
+(QMTM) using messages for transmit, receive and allocating data buffers.
+There are multiple ethernet interfaces in APM X-Gene SoC. Each ethernet
+interface has its own node. Its corresponding clock nodes are shown below.
+
+Required properties:
+- compatible           : Shall be "apm,xgene-enet"
+- reg                  : First memory resource shall be the Ethernet CSR
+                         memory resource for indirect MAC access.
+                         Second memory resource shall be the Ethernet CSR
+                         memory resource.
+                         Third memory resource shall be the Ethernet CSR
+                         memory resource for indirect MII access.
+- slave-name           : Shall be QMTM slave name.
+- interrupts           : First interrupt resource shall be the Ethernet global
+                         Error interrupt.
+                       : Second interrupt resource shall be the Ethernet MAC
+                         Error interrupt.
+                       : Third interrupt resource shall be the Ethernet QM
+                         interface interrupt.
+- clocks               : Reference to the clock entry.
+- local-mac-address    : Shall be ethernet mac address.
+- max-frame-size       : Shall be maximum ethernet frame size.
+- devid                        : Shall be ethernet interface number.
+- phyid                        : Shall be ethernet MII phy address.
+- phy-mode             : Shall be ethernet MII mode.
+
+Optional properties:
+- status               : Shall be "ok" if enabled or "disabled" if disabled.
+                         Default is "ok".
+
+Example:
+       eth8clk: eth8clk {
+               compatible = "apm,xgene-device-clock";
+               clock-names = "eth8clk";
+               status = "ok";
+       };
+
+       menet: ethernet@17020000 {
+               compatible = "apm,xgene-enet";
+               status = "disabled";
+               reg = <0x0 0x17020000 0x0 0x30>,
+                     <0x0 0x17020000 0x0 0x10000>,
+                     <0x0 0x17020000 0x0 0x20>;
+               slave-name = "RGMII";
+               interrupts = <0x0 0x38 0x4>,
+                            <0x0 0x39 0x4>,
+                            <0x0 0x3a 0x4>;
+               clocks = <&eth8clk 0>;
+               local-mac-address = <0x0 0x11 0x3a 0x8a 0x5a 0x78>;
+               max-frame-size = <0x233a>;
+               devid = <8>;
+               phyid = <3>;
+               phy-mode = "rgmii";
+       };
+
+/* Board-specific peripheral configurations */
+aliases {
+       ethernet0 = &menet;
+};
+
+&menet {
+        status = "ok";
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/