On Wed, Jan 08, 2014 at 11:45:38AM +0530, Roger Quadros wrote: > diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt > b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt > index b381fa6..5635202 100644 > --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt > +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt > @@ -32,6 +32,10 @@ Optional properties: > - single-ulpi-bypass: Must be present if the controller contains a single > ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1 > > +- clocks: phandle to 60MHz functional clock to the USB Host module. > + > +- clock-names: must be "init_60m_fclk" > + > Required properties if child node exists: > > - #address-cells: Must be 1
I have some questions:
What about the other clocks acquired in drivers/mfd/omap-usb-host.c? Shouldn't
all of those be provided by via the DT phandle?
Should the clk_get be changed to of_clk_get()/of_clk_get_by_name() in the
driver? This would potentially remove the need of the init_60m_fclk name.
$ grep clk_get drivers/mfd/omap-usb-host.c
omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
omap->utmi_clk[i] = clk_get(dev, clkname);
omap->hsic480m_clk[i] = clk_get(dev, clkname);
omap->hsic60m_clk[i] = clk_get(dev, clkname);
-- Sebastian
signature.asc
Description: Digital signature
