[PATCH 3/6] Always bring the i8042 multiplexer out of multiplexing mode

[Vojtech Pavlik]

You can pull this changeset from:
        bk://kernel.bkbits.net/vojtech/for-linus

===================================================================

[EMAIL PROTECTED], 2005-01-27 13:47:19+01:00, [EMAIL PROTECTED]
  input: Always bring the i8042 multiplexer out of multiplexing mode before
         rebooting.
  
  Signed-off-by: Vojtech Pavlik <[EMAIL PROTECTED]>


 i8042.c |   36 ++++++++++++++++++++++--------------
 1 files changed, 22 insertions(+), 14 deletions(-)

===================================================================

diff -Nru a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
--- a/drivers/input/serio/i8042.c       2005-01-27 17:47:51 +01:00
+++ b/drivers/input/serio/i8042.c       2005-01-27 17:47:51 +01:00
@@ -458,12 +458,11 @@
 }
 
 /*
- * i8042_enable_mux_mode checks whether the controller has an active
- * multiplexor and puts the chip into Multiplexed (as opposed to
- * Legacy) mode.
+ * i8042_set_mux_mode checks whether the controller has an active
+ * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
  */
 
-static int i8042_enable_mux_mode(struct i8042_values *values, unsigned char 
*mux_version)
+static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
 {
 
        unsigned char param;
@@ -482,11 +481,11 @@
        param = 0xf0;
        if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x0f)
                return -1;
-       param = 0x56;
+       param = mode ? 0x56 : 0xf6;
        if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa9)
                return -1;
-       param = 0xa4;
-       if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == 0x5b)
+       param = mode ? 0xa4 : 0xa5;
+       if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0x5b 
: 0x5a))
                return -1;
 
        if (mux_version)
@@ -540,11 +539,11 @@
 {
        unsigned char mux_version;
 
-       if (i8042_enable_mux_mode(values, &mux_version))
+       if (i8042_set_mux_mode(1, &mux_version))
                return -1;
 
-       /* Workaround for broken chips which seem to support MUX, but in 
reality don't. */
-       /* They all report version 10.12 */
+       /* Workaround for interference with USB Legacy emulation */
+       /* that causes a v10.12 MUX to be found. */
        if (mux_version == 0xAC)
                return -1;
 
@@ -774,12 +773,21 @@
  */
 void i8042_controller_reset(void)
 {
-       if (i8042_reset) {
-               unsigned char param;
+       unsigned char param;
+
+/*
+ * Reset the controller if requested.
+ */
 
+       if (i8042_reset)
                if (i8042_command(&param, I8042_CMD_CTL_TEST))
                        printk(KERN_ERR "i8042.c: i8042 controller reset 
timeout.\n");
-       }
+
+/*
+ * Disable MUX mode if present.
+ */
+
+       i8042_set_mux_mode(0, NULL);
 
 /*
  * Restore the original control register setting.
@@ -888,7 +896,7 @@
        }
 
        if (i8042_mux_present)
-               if (i8042_enable_mux_mode(&i8042_aux_values, NULL) ||
+               if (i8042_set_mux_mode(1, NULL) ||
                    i8042_enable_mux_ports(&i8042_aux_values)) {
                        printk(KERN_WARNING "i8042: failed to resume active 
multiplexor, mouse won't work.\n");
                }

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/